Abstract
The main goal of the described activity is the verification of an innovative production process of a steel supporting plate by using numerical simulation. The normal production process consists of different phases and processes: the laser cutting of blanks, welding, stress relieving, heat treatment and machining. The studied alternative is a sand casting process in order to directly obtain the final supporting plate. Numerical simulations were used to investigate the impact behavior of complex products in order to define the best production solution. The new design chain represents an important simplification in order to reach a simpler, less expensive and more sustainable manufacturing process and these aspects were confirmed performing a Life Cycle Assessment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Baldo, G.L.: LCA - Life Cycle Assessment, IPASERVIZI (2000)
Fontana, M.: Diffusione ed uso dei risultati del programma di ricerca ExternE, Inquinamento nr. 11, vol. 199, pp. 18–19 (1999)
ISO 14040: Environmental Management - Life Cycle Assessment - Principles and Framework (1997)
ISO 14041: Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis (1998)
ISO 14042: Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment (2000)
ISO 14043: Environmental Management - Life Cycle Assessment - Life Cycle Interpretation (2000)
Rinaldi, E.: Saldatura e taglio dei metallic. HOEPLI (2001)
modeFRONTIER 4.0: User’s Manual. ESTECO, Trieste (2009)
Karsay, S.I.: Production, Ductile Iron, vol. 1. QIT, Fer et Titane Inc. (1981)
Sobol’, I.M.: On the systematic search in a hypercube. SIAM J. Numer. Anal. 16(5), 790–793 (1979)
Poles, S., Vassileva, M., Sasaki, D.: Multiobjective optimization software. In: Branke, J., Deb, K., Miettinen, K., Słowiński, R. (eds.) Multiobjective Optimization. LNCS, vol. 5252, pp. 329–348. Springer, Heidelberg (2008). doi:10.1007/978-3-540-88908-3_12
Poles, S., Geremia, P., Campos, F., Weston, S., Islam, M.: MOGA-II for an automotive cooling duct optimization on distributed resources. In: Obayashi, S., Deb, K., Poloni, C., Hiroyasu, T., Murata, T. (eds.) EMO 2007. LNCS, vol. 4403, pp. 633–644. Springer, Heidelberg (2007). doi:10.1007/978-3-540-70928-2_48
Pettersson, F., Chakraborti, N., Saxen, H.: A genetic algorithms based multi-objective neural net applied to noisy blast furnace data Source. Appl. Soft Comput. 7(1), 387–397 (2007)
Pettersson, F., Biswas, A., Sen, P.K., Saxen, H., Chakraborti, N.: Analyzing leaching data for low-grade manganese ore using neural nets and multiobjective genetic algorithms. Mater. Manuf. Processes 24(3), 320–330 (2009)
Egner-Walter, A., Hartmann, G., Kothen, M.: Integration of manufacturing process simulation in to the process chain. In: 20th CAD-FEM User Meeting, Kultur-und Congress Centrum Graf Zeppelin Haus, Friedrichshafen, Lake Costance, Germany, 9–11 October 2002
Bonollo, F., Odorizzi, S., Numerical Simulation of Foundry Processes. SGEditoriali (2001)
Gramegna, N., Bucchieri, L., Furlan, L.: Integrated CAE development of innovative grey iron heat exchanger. In: NAFEMS World Congress 2005, Malta, 17–20 May 2005
Acknowledge
The Authors want to thank Sacmi Imola S. C. and EnginSoft S.p.A. for their support during the development of the project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Bertuzzi, G., Di Rosa, S., Scarpa, G. (2017). Optimized Production Process of a Supporting Plate as an Improvement of the Product Sustainability. In: Campana, G., Howlett, R., Setchi, R., Cimatti, B. (eds) Sustainable Design and Manufacturing 2017. SDM 2017. Smart Innovation, Systems and Technologies, vol 68. Springer, Cham. https://doi.org/10.1007/978-3-319-57078-5_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-57078-5_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-57077-8
Online ISBN: 978-3-319-57078-5
eBook Packages: EngineeringEngineering (R0)