Advertisement

Study on Hard Turning Process Versus Grinding in Manufacturing Some Bearing Inner Rings

Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Advanced manufacturing technologies are based on-time-delivery principles. The customer requirements regarding quality, cost and delivery terms become more and more important , both for supplier and sub-supplier. Taking into account these considerations, all companies started the implementation of some new strategies and technologies based on continuous improvement principle. One of these is hard turning, as a cost efficient alternative to grinding. The technology is analyzed in the case of a bearing component, as a new process step versus the existing grinding process. Experimental tests were performed in order to describe the advantages of this technology. Cubic Boron Nitride grades (CBN) are used for cutting. The main influence of this technology in process flow is analyzed from different approaches. Experimental results were analyzed in terms of the ring surface quality, roughness and profile, and also on process time and production cost.

Keywords

Quality Hard turning Grinding Bearings components 

Notes

Acknowledgements

This work was supported by Rulmenti SA Barlad.

References

  1. 1.
    Dangayach GS, Pathak SC, Sharma AD (2006) Advanced manufacturing technology: a way of improving technological competitiveness. Int J Global Business Competitiveness 2(1):1–8Google Scholar
  2. 2.
    Urs RR, Mahesh BP, Sandesh S (2014) On-Time Delivery Improvement Using Lean Concepts—A Case Study of Norglide Bearings. Int J Innovative Res Sci Eng Technol 3(6):13349–13354Google Scholar
  3. 3.
    Seveen K, Muniswaran K (2007) Experimental study on hard turning of hardened tool steel with coated carbide cutting tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical EngineeringGoogle Scholar
  4. 4.
    Gosiger MC (2012) Fundamentals of hard turning—an depth look at the process, (http://cdn2.hubspot.net/hub/139128/file-17761415-pdf/docs/gos_wp_hardturning_f.pdf)
  5. 5.
    Piska M, Forejt M (2006) Theory of machining, forming and cutting tools. UST FSI VUT, Brno, Czech Republic. ISBN 80-214-2374-9Google Scholar
  6. 6.
    Tóth T, Kundrák J, Gyáni K (2004) The removal rate as a parameter of qualification for hard turning and grinding. Tools Methods Competitive Eng 1(2):629–639Google Scholar
  7. 7.
    Kundrak J, Karpuschewski B, Gyani K, Bana V (2008) Accuracy of Hard Turning. J Mater Process Technol 202:328–338CrossRefGoogle Scholar
  8. 8.
    Abrao AM, Aspinwal DK (1996) The surface integrity of turned and ground hardened bearing steel. Wear 196:279–284CrossRefGoogle Scholar
  9. 9.
    Choi Y (2009) A comprehensive study of residual stress distribution induced by hard machining versus grinding. Tribological Lett 36:277–284Google Scholar
  10. 10.
    Das DK, Sahoo AK, Das R, Routara BC (2014) Investigations on hard turning using coated carbide insert: Grey based Taguchi and regression methodology. Procedia Mater Sci 6:1351–1358CrossRefGoogle Scholar
  11. 11.
    Zawada-Tomkiewicz A (2011) Analysis of surface roughness parameters achieved by hard turning with the use of PCBN tools. Est J Eng 17(1):88–99Google Scholar
  12. 12.
    Grzesik W, Żak K, Kiszka P (2014) Comparison of surface textures generated in hard turning and grinding operation. Procedia CIRP 13:84–89CrossRefGoogle Scholar
  13. 13.
    Waydande P, Ambhore N, Chinchanikar S (2016) A review on tool wear monitoring system. J Mech Eng Autom 6(5A):49–53Google Scholar
  14. 14.
    Singh D, Rao PV (2008) Improvement in surface quality with solid lubrication in hard turning. In: Proceeding of the world congress on engineering, vol 3, LondonGoogle Scholar
  15. 15.
    Tönshoff HK, Arendt C, Amor RB (2000) Cutting of hardened steel. CIRP Annals-Manufact Technol 49(2):547–566CrossRefGoogle Scholar
  16. 16.
    Davim J (2008) Machining, fundamentals and recent advances. Br Libr Cataloguing. doi: 10.1007/978-1-84800-213-5 Google Scholar
  17. 17.
    Basil MP, Raju T, Biju B (2014) Optimization of cutting parameters in hard turning of AISI 4340 steel. Int J Innovative Res Adv Eng (IJIRAE) 1(8): 93–98. ISSN: 2349-2163,Google Scholar
  18. 18.
    Kaçal A, Yıldırım F (2013) High speed hard turning of AISI S1 (60WCrV8) cold work tool steel. Acta Polytechnica Hungarica 10(8):169–186Google Scholar
  19. 19.
    Puh F, Šegota T, Jurković Z (2012) Optimization of hard turning process parameters with pcbn tool based on the taguchi method. Technical Gazette 19(2):415–419Google Scholar
  20. 20.
    Umer U, Butt SI, Askari SJ, Danish SN, Xie L (2008) Comparative analyses for different modeling methods in high speed turning operations for hardened steel. J Mech Eng 54(12):850–854Google Scholar
  21. 21.
    Davim JP, Maranhão C, Faria P, Abrão A, Rubio JC, Silva LR (2009) Precision radial turning of AISI D2 steel. Int J Adv Manuf Technol 42(9):842–849CrossRefGoogle Scholar
  22. 22.
    Bhadeshia HKDH (2012) Steels for bearings. Prog Mater Sci 57:268–435CrossRefGoogle Scholar
  23. 23.
    Grzesik W, Zak K (2013) Comparison of surface textures produced by finish cutting, abrasive and burnishing operations in terms of their functional properties. J Machine Eng 13(2):46–58Google Scholar
  24. 24.
    Sahin Y, Motorcu AR (2008) Surface roughness model in machining hardened steel with cubic boron nitride cutting tool. Int J Refractory Metals Hard Mater 26:84–90Google Scholar
  25. 25.
    Derakhshan ED, Akbari AA (2009) Experimental investigation on the effect of workpiece hardness and cutting speed on surface roughness in hard turning with CBN tools. In: Proceeding of the world congress on engineering, vol 2, LondonGoogle Scholar
  26. 26.
    Sahin Y (2009) Comparison of tool life between Ceramic and Cubic Boron Nitride (CBN) cutting tool when, machining hardened steels. J Mater Process Technol 209(7):3478–3489CrossRefGoogle Scholar
  27. 27.
    D’Addona DM, Raykar SJ (2016) Analysis of surface roughness in hard turning using wiper insert geometry. Procedia CIRP 41:841–846CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Rulmenti SABarladRomania
  2. 2.Faculty of EngineeringDunarea de Jos University of GalatiGalațiRomania

Personalised recommendations