Skip to main content

Recovery of Metals from Solar Cells by Bioleaching

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Solar energy is commonly seen as a clean energy source, an alternative to the fossil fuels, as there is no emission of any matter into the environment during operation, endurable operation period, minimum maintenance, robust technique and aesthetic aspects. If one considers the growing use of solar cells, the problem of recycling spent solar cells, the quantities of which will increase rapidly in the coming years, is yet to be solved. Establishing a technology for recycling and reusing the same is thus a necessity. Solar cells contain precious metals including silver, tellurium, and indium along with other heavy metals such as copper, aluminum, lead, arsenic, cadmium, selenium which are hazardous. Limited recycling will result in disposal of these recoverable metals in the waste. There remains the dearth of studies on recycling of old solar cells using microorganisms. In the current study, the recovery of metals from solar cells was investigated using Thiobacillus ferrooxidans micro-organism, and its culture supernatant was found to be effective for bioleaching of metals from solar cell powder. B, Mg, Si, Ni and Zn were removed with 100% efficiency within a reasonable time. T. ferrooxidans recovered 100% Cr, Mn, and Cu at 60 °C, however, only 41.6 and 13.4% of Al and Te were extracted respectively. These results suggest the higher temperature optimum for metal recovery from solar cells in use of the organism. The possible success in this endeavor will allow reuse of waste solar cells without affecting the environment.

Keywords

  • Metal recovery
  • Solar cells
  • Bioleaching
  • Thiobacillus ferrooxidans

This is a preview of subscription content, access via your institution.

Buying options

Chapter
USD   29.95
Price excludes VAT (USA)
  • DOI: 10.1007/978-3-319-56430-2_20
  • Chapter length: 8 pages
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
eBook
USD   189.00
Price excludes VAT (USA)
  • ISBN: 978-3-319-56430-2
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
Softcover Book
USD   249.99
Price excludes VAT (USA)
Fig. 1
Fig. 2
Fig. 3

References

  1. Amiri F, Yaghmaei S, Mousavi SM (2011) Bioleaching of tungsten-rich spent hydrocracking catalyst using Penicillium simplicissimum. Bioresour Technol 102:1567–1573

    CrossRef  Google Scholar 

  2. Bleiwas DI (2010) Byproduct mineral commodities used for the production of photovoltaic cells. U.S. Geological Survey Circular 1365, 10 p. https://pubs.usgs.gov/circ/1365/. Accessed 04 Jan 2017

  3. Gholami R, Borghei S, Mousavi S (2011) Bacterial leaching of a spent MoeCoeNi refinery catalyst using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Hydrometallurgy 106:26–31

    CrossRef  Google Scholar 

  4. Hocheng H, Chang J, Jadhav U (2012) Micromachining of various metals by using Acidithiobacillus ferrooxidans 13820 culture supernatant experiments. J Cleaner Prod 20:180–185

    CrossRef  Google Scholar 

  5. Hocheng H, Hong T, Jadhav U (2014) Microbial leaching of waste solder for recovery of metal. Appl Biochem Biotechnol 173:193–204

    CrossRef  Google Scholar 

  6. Hocheng H, Su C, Jadhav UU (2014) Bioleaching of metals from steel slag by Acidithiobacillus thiooxidans culture supernatant. Chemosphere 117:652–657

    CrossRef  Google Scholar 

  7. Jadhav U, Hocheng H (2013) Extraction of silver from spent silver oxide zinc button cells by using Acidithiobacillus ferrooxidans culture supernatant. J Cleaner Prod 44:39–44

    CrossRef  Google Scholar 

  8. Jadhav U, Hocheng H (2014) Use of Aspergillus niger 34770 culture supernatant for tin metal removal. Corros Sci 85:248–255

    CrossRef  Google Scholar 

  9. Jadhav U, Hocheng H, Weng W (2013) Innovative use of biologically produced ferric sulfate for machining of copper metal and study of specific metal removal rate and surface roughness during the process. J Mater Process Technol 213:1509–1515

    CrossRef  Google Scholar 

  10. Kang S, Yoo S, Lee J, Boo B, RyuH (2012) Experimental investigations for recycling of silicon and glass from waste photovoltaic modules. Renew Energy 47:152–159

    Google Scholar 

  11. Kim S, Bae J, Park H, Cha D (2005) Bioleaching of cadmium and nickel from synthetic sediments by Acidithiobacillus ferrooxidans. Environ Geochem Health 27:229–235

    CrossRef  Google Scholar 

  12. Klugmann-Radziemska E, Ostrowski P (2010) Chemical treatment of crystalline silicon solar cells as a method of recovering pure silicon from photovoltaic modules. Renew Energy 35:1751–1759

    Google Scholar 

  13. Mah O (1998) Fundamentals of photovoltaic materials. National Solar Power Research Institute, Inc., 10 p. http://userwww.sfsu.edu/~ciotola/solar/pv.pdf. Accessed 8 May 8 2009

  14. U.S. Department of Energy, Solar Technologies Program (2008) Solar FAQs-Photovoltaics—ALL. U.S. Department of Energy. http://apps1.eere.energy.gov/solar/cfm/faqs/third_level.cfm/name=Photovoltaics/cat=ALL. Accessed 1 Apr 2009

  15. Wu HY, Ting YP (2006) Metal extraction from MSW incinerator fly ash Chemical leaching and fungal bioleaching. Enzym Microb Technol 38:839–847

    CrossRef  Google Scholar 

  16. Yi YK, Kim HS, Tran T, Hong SK, Kim MJ (2014) Recovering valuable metals from recycled photovoltaic modules. J Air Waste Manage Assoc 64:797–807

    CrossRef  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hong Hocheng .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and Permissions

Copyright information

© 2017 Springer International Publishing AG

About this paper

Cite this paper

Chakankar, M., Su, C., Hocheng, H. (2017). Recovery of Metals from Solar Cells by Bioleaching. In: Majstorovic, V., Jakovljevic, Z. (eds) Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies. NEWTECH 2017. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-56430-2_20

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-56430-2_20

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-56429-6

  • Online ISBN: 978-3-319-56430-2

  • eBook Packages: EngineeringEngineering (R0)