Advertisement

Assessment of Assembly Process Complexity and Modularity in Mass Customized Manufacturing

  • Slavomir Bednar
  • Jan Modrak
  • Zuzana Soltysova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Consumers’ market is made up of huge number of products as a direct response to the ever increasing demands of customers. This situation is closely related to constantly evolving technical and technological industries. The rapidly increasing demand on products and variety of functional properties enabled a series of fast-growing and emerging processes and operations all over the industry. Unfortunately for companies, such variety results with a complexity of both, products and related processes. This paper deals with the external-product and internal-process complexity in the view of its usability within a mass customized manufacturing. A novel method to identify and measure product and process complexity of an assembly station is proposed on the basis of the number of product and process variants. Subsequently, the aggregated complexity ratios can provide a complexity map of an entire production line. The novel complexity assessment method is applied and verified on the case automotive manufacturing plant. As a result of this application, the newly-proposed complexity assessment methodology is highly useful especially in customized automotive production as an effective tool for assessing the level of complexity of a selected department, or when introducing a new installation. The newly-proposed methodology can be also adopted by a company to decide on what part or sub-module can be produced by external supplied—transfer of complexity—in order to decrease own process complexity and to keep the extent of variety offered to customers. Finally, based on the case application and verifications, the complexity assessment methodology proposed in this paper is highly applicable in the mass customized manufacturing.

Keywords

Complexity Variety Mass customization Automotive Assembly 

References

  1. 1.
    Fettermann DC, Soares Echveste ME (2014) New product development for mass customization: a systematic review. Prod Manufact Res 2(1):266–290Google Scholar
  2. 2.
    Hankammer S, Steiner F (2015) The sustainability potential of mass customization through product service systems in the consumer electronics industry. In: Procedia CIRP 30, pp 504–509. ISSN 2212-8271. doi:http://dx.doi.org/10.1016/j.procir.2015.03.007
  3. 3.
    Alan SB (2009) From simple rules, complex behavior. Mech Eng 131:22–27Google Scholar
  4. 4.
    Tiihonen J, Soininen T, Männistö T, Sulonen R (1996) State-of-the-practice in product configuration—a survey of 10 cases in the Finnish industry. Knowledge intensive CAD. Springer, US, pp 95–114CrossRefGoogle Scholar
  5. 5.
    Klein R, Buchheit M, Nutt W (1994) Configuration as model construction: the constructive problem solving approach. In: Proceedings of artificial intelligence in design, pp 201–218Google Scholar
  6. 6.
    Mittal S, Frayman F (1989) Towards a generic model of configuration tasks. In: Proceedings of the eleventh IJCAI, pp 20–25Google Scholar
  7. 7.
    Najman O, Stein B (1992) A theoretical framework for configurations. In: Belli F, Radermacher F J (eds) Proceedings of industrial and engineering applications of artificial intelligence and expert systems: 5th international conference, IEA/AIE-92, pp 441–450Google Scholar
  8. 8.
    Aichner T, Coletti P (2013) Customers’ online shopping preferences in mass customization. J Dir Data Digital Mark Pract 15(1):20–35CrossRefGoogle Scholar
  9. 9.
    Matt DT, Rauch E, Dallasega P (2016) Trends towards distributed manufacturing systems and modern forms for their design. In: Teti R (ed) International conference on intelligent computation in manufacturing engineering (ICME’15)—proceedings, Capri, Italy, vol 33, pp 185–190Google Scholar
  10. 10.
    Calinescu A, Efstathiou J, Schirn J, Bermejo J (1998) Applying and assessing two methods for measuring complexity in manufacturing. J Oper Res Soc, 723–733Google Scholar
  11. 11.
    Jiao J, Ma Q, Tseng MM (2003) Towards high value-added products and services: mass customization and beyond. Technovation 23(10):809–821Google Scholar
  12. 12.
    Liu XF, Kane G, Bambroo M (2006) An intelligent early warning system for software quality improvement and project management. J Syst Softw 79(11):1552–1564CrossRefGoogle Scholar
  13. 13.
    Fredendall D, Gabriel TJ (2003) Manufacturing complexity: a quantitative measure. In: POMS conference—proceedings, 4–7 April, Savannah, GAGoogle Scholar
  14. 14.
    Shannon CEA (1948) Mathematical theory of communication. Bell Syst Tech J 27(3):379–423MathSciNetCrossRefMATHGoogle Scholar
  15. 15.
    Zhu X, Koren SJ, Marin SP (2008) Modeling of manufacturing complexity in mixed-model assembly lines. J Manuf Sci Eng 130(5):313–334Google Scholar
  16. 16.
    Kim YS (1999) A system complexity approach for the integration of product development and production system design. Master of Science, Massachusetts Institute of TechnologyGoogle Scholar
  17. 17.
    Krus P (2015) Design space configuration for minimizing design information entropy. In: Proceedings of the ICoRD’15—research into design across boundaries: theory, research methodology, aesthetics, human factors and education, 7–9 Jan. Springer India, pp 51–60Google Scholar
  18. 18.
    Chramcov B, Bucki R, Suchanek P (2013) Logistic optimization of the complex manufacturing system with parallel production lines. J Appl Econ Sci (JAES) 3(25):271–285Google Scholar
  19. 19.
    Kampker A, Burggräf P, Swist M, Nowacki C (2014) Assessment and configuration of a product production system. In: Enabling manufacturing competitiveness and economic sustainability. Springer International Publishing, pp 147–152Google Scholar
  20. 20.
    Grussenmeyer R, Blecker T (2013) Requirements for the design of a complexity management method in new product development of integral and modular products. Int J Eng Sci Technol 5(2):132–149Google Scholar
  21. 21.
    Modrak V, Marton D (2012) Modelling and complexity assessment of assembly supply chain systems. In: Procedia Engineering, vol 48, pp 428–435Google Scholar
  22. 22.
    Modrak V, Marton D, Kulpa W, Hricova R (2012) Unraveling complexity in assembly supply chain networks. In: 2012 4th IEEE international symposium on logistics and industrial informatics (LINDI), pp 151–156Google Scholar
  23. 23.
    Wang H (2010) Product variety induced complexity and its impact on mixed-model assembly systems and supply chains. Doctoral dissertation, General MotorsGoogle Scholar
  24. 24.
    Modrak V, Marton D, Bednar S (2015) The influence of mass customization strategy on configuration complexity of assembly systems. In: Procedia CIRP, vol 33, pp 538–543Google Scholar
  25. 25.
    Modrak V, Marton D, Bednar S (2014) The impact of customized variety on configuration complexity of assembly process. Appl Mech Mater 474:135–140Google Scholar
  26. 26.
    Bednar S, Modrak V (2014) Mass customization and its impact on assembly process’ complexity. Int J Qual Res 8(3):417–430Google Scholar
  27. 27.
    Suh NP (2005) Complexity in engineering. CIRP Ann Manufact Technol 54(2):46–63Google Scholar
  28. 28.
    Guenov MD (2002) Complexity and cost effectiveness measures for systems design. In: Manufacturing complexity network conference, Cambridge, UK. ISBN 1-902546-24-5Google Scholar
  29. 29.
    Modrak V, Bednar S (2015) Using axiomatic design and entropy to measure complexity in mass customization. In: Procedia CIRP, vol 34, pp 87–92Google Scholar
  30. 30.
    Blackenfelt M (2001) Managing complexity by product modularisation. Doctoral dissertation, Maskinkonstruktion. doi:http://kth.diva-portal.org/smash/get/diva2:8851/FULLTEXT01.pdf

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Faculty of Manufacturing Technologies with a Seat in PresovTechnical University of KosicePresovSlovakia

Personalised recommendations