Advertisement

Bearing Strength

  • René Alderliesten
Chapter
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 236)

Abstract

The bearing strength of FMLs is discussed with respect to the individual constituent phenomena. In particular the two main methods to experimentally obtain the bearing strength are discussed, addressing ply delamination buckling as an important phenomenon. The influence of the various characteristic specimen dimensions on the bearing strength is discussed, and theories are presented to predict the bearing strength of FMLs based on their constituent materials.

Keywords

Failure Mode Edge Distance Bearing Strength Monolithic Aluminium Bearing Failure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    ASTM Standard E238-84, Standard method of test for bearing strength of metallic materials, Annual Book of ASTM Standards. American Society for Testing and Materials, Philadelphia, USAGoogle Scholar
  2. 2.
    ASTM Standard D953-54, Standard test method for bearing strength of plastics, Annual Book of ASTM Standards. American Society for Testing and Materials, Philadelphia, USAGoogle Scholar
  3. 3.
    Slagter WJ (1992) On the Bearing Strength of Fibre Metal Laminates. J Compos Mater 26:2542–2566CrossRefGoogle Scholar
  4. 4.
    Slagter WJ (1994) Static strength of riveted joints in fibre metal laminates. PhD dissertation, Delft University of Technology, DelftGoogle Scholar
  5. 5.
    Hakker M (1992) Geometry effects on the bearing strength of GLARE laminates. Preliminary thesis, Faculty of Aerospace Engineering, Delft University of TechnologyGoogle Scholar
  6. 6.
    Hakker M (1993) Bearing strength of GLARE laminates. Master’s thesis, Faculty of Aerospace Engineering, Delft University of TechnologyGoogle Scholar
  7. 7.
    Brügemann V (2003) Test procedures for fibre metal laminates, Report TD-R-03-005. Fibre Metal Laminates Centre of Competence, Delft, The NetherlandsGoogle Scholar
  8. 8.
    Hundley JM, Hahn HTh, Yang J-M, Facciano AB (2010) Three-dimensional progressive failure analysis of bolted titanium-graphite fiber metal laminate joints. J Compos Mater 45(7):751–769CrossRefGoogle Scholar
  9. 9.
    Caprino G, Squillace A, Giorleo D, Nele L, Rossi L (2005) Pin and bolt bearing strength of fibreglass/aluminium laminates. Compos A 36:1307–1315CrossRefGoogle Scholar
  10. 10.
    Buczynski A (2009) Development of a carbon-fiber/stainless steel laminate concept—improving the bearing characteristics of carbon-fiber composites by addition of steel strip reinforcements. MSc thesis, Delft University of Technology, DelftGoogle Scholar
  11. 11.
    Frizzell RM, McCarthy CT, McCarthy MA (2008) An experimental investigation into the progression of damage in pin-loaded fibre metal laminates. Compos B 39:907–925CrossRefGoogle Scholar
  12. 12.
    Yamada T, Nakatani H, Ogihara S (2011) Evaluation of bearing damage behaviour in thin titanium films-CFRP hybrid laminate, ICCM19?Google Scholar
  13. 13.
    Wu HF, Wu LL, Slagter WJ (1994) An investigation on the bearing test procedure for fibre-reinforced aluminium laminates. J Mater Sci 29:4592–4603CrossRefGoogle Scholar
  14. 14.
    Collings TA (1977) The strength of bolted joints in multi-directional CFRP laminates. Aeronautical Research Council, Current Papers No. 1380Google Scholar
  15. 15.
    Meola C, Squillace A, Giorleo G, Nele L (2003) Experimental characterization of an innovative GLARE® fiber reinforced metal laminate in pin bearing. J Compos Mater 37(17):1543–1552CrossRefGoogle Scholar
  16. 16.
    Caprino G, Giorleo G, Nele L, Squillace A (2002) Pin-bearing strength of glass mat reinforced plastics. Compos A Appl Sci Manuf 33:779–785CrossRefGoogle Scholar
  17. 17.
    Meesters (2000) Edge distance and rivet pitch in joints, a literature survey, Report B2v-00-13. Delft University of Technology, DelftGoogle Scholar
  18. 18.
    Wu HF, Slagter WJ (1992) Parametric studies of bearing strength for fiber/metal laminates, SLC-report SL-019-E. Structural Laminates Company, DelftGoogle Scholar
  19. 19.
    Broest P (2000) The influence of the edge distance on the joint strength in GLARE laminates, Report B2v-00-67. Delft University of Technology, DelftGoogle Scholar
  20. 20.
    de Rijck R (2003) Residual strength prediction of XJ-advanced specimens, Report B2v-03-07. Delft University of Technology, DelftGoogle Scholar
  21. 21.
    Broest P, Nijhuis P (2000) Determination of bearing strength, Report B2v-00-39. Delft University of Technology, DelftGoogle Scholar
  22. 22.
    Rooijen RGJ (2006) Bearing strength characteristics of standard and steel reinforced GLARE, PhD dissertation. Delft University of Technology, DelftGoogle Scholar
  23. 23.
    Holleman E (1994) Bearing strength prediction for some GLARE grades (BE2040 subtask 5.1-a), Memorandum M-683. Delft University of Technology, DelftGoogle Scholar
  24. 24.
    Krimbalis PP, Poon C, Fawaz Z, Behdinan K (2007) Experimental characterization of the bearing strength of fiber metal laminates. J Compos Mater 41:3109–3131CrossRefGoogle Scholar
  25. 25.
    Mattousch AC (1994) Bearing properties of GLARE 2-2/1-0.3, GLARE 2-3/2-0.3 and GLARE 3-3/2-0.3, Report TD-R-94-010. Structural Laminates CompanyGoogle Scholar
  26. 26.
    Roebroeks G (2000) The metal volume fraction approach, Report: TD-R-00-003. Structural Laminates Industries, Delft, The NetherlandsGoogle Scholar
  27. 27.
    Rooijen RGJ, Sinke J, de Vries TJ, van der Zwaag S (2006) The bearing strength of fiber metal laminates. J Compos Mater 40(1):5–19CrossRefGoogle Scholar
  28. 28.
    Krimbalis PP, Poon C, Fawaz Z, Behdinan K (2007) Prediction of bearing strength in fiber metal laminates. J Compos Mater 41(9):1137–1157CrossRefGoogle Scholar
  29. 29.
    Krimbalis PP, Poon C, Fawaz Z, Behdinan K (2008) On the pin bearing behavior of orthotropic fiber metal laminates. J Compos Mater 42:1547–1566CrossRefGoogle Scholar
  30. 30.
    Garg M, Falugi M, Abdi F, Abumeri G (2011) Predicting bearing strength of fiber metal laminates via progressive failure analysis. 52nd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference 19th, 4–7 April 2011, Denver, ColoradoGoogle Scholar
  31. 31.
    Hagenbeek M (2005) Characterisation of fibre metal laminates under thermo-mechanical loadings, PhD dissertation. Delft University of Technology, DelftGoogle Scholar
  32. 32.
    Ypma M (2002) Exploratory investigation on the effect of bearing/bypass interaction on the static joint strength of GLARE, Report B2v-02-05. Delft University of Technology, DelftGoogle Scholar
  33. 33.
    MIL HDBK—17—1E. Department of Defense U.S.AGoogle Scholar
  34. 34.
    Schijve J (2009) Fatigue of structures and materials. Springer Science + Business Media, B.V.CrossRefzbMATHGoogle Scholar
  35. 35.
    Hagenbeek M (2000) Estimation tool for basic Material properties, ETMP_release 2, Report B2 V-00-29. Delft University of Technology, Delft, The NetherlandsGoogle Scholar
  36. 36.
    MIL HDBK—5H, December 1998. Department of Defense U.S.AGoogle Scholar
  37. 37.
    Borgonje B (2002) GLARE outdoor exposure program: bearing strength, Report B2v-02-36. Delft University of Technology, DelftGoogle Scholar
  38. 38.
    Hoeven W. van der, Nijhuis P (2002) Qualification testing of semi-finished flat GLARE products, NLR-CR-2002-146. NLR National Aerospace LaboratoryGoogle Scholar
  39. 39.
    Ypma M (2000) Overview of tests concerning the influence of temperature and environmental exposure on GLARE, Report B2v-00-41. Delft University of Technology, DelftGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  • René Alderliesten
    • 1
  1. 1.Faculty of Aerospace EngineeringDelft University of TechnologyDelftThe Netherlands

Personalised recommendations