Abstract
The rotor of an electric machine is the direct transfer of torque and speed to the drivetrain through the shaft. As such, its vibrations might deteriorate the efficiency but also, irreversibly, the machine itself. It is particularly important to identify critical frequencies at which resonance may occur. In this paper, a newly identified structural mode is extracted experimentally on an induction machine and justifies the need for more investigations. This mode involves bending of the end-plates of the stator, together with bending of the rotor component which can potentially be a dangerous mode shape. The results are gathered by carrying various experiments in which experimental modal analyses are carried out for characterization of the test specimens. The influence of the rotor dynamics on the behavior of the complete machine is collected by testing two different rotors, alone, and then assembled with the exact same stator.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Verma, S.P., Williams, K., Singal, R.K.: Vibrations of long and short laminated stators of electrical machines, part I: theory, experimental models, procedure and set-up. J. Sound Vib. 129, 1–13 (1989)
Hendershot J.R.: Causes and sources of audible noise in electric motors. In: Kuo B.C. (ed.) Proceedings of 22nd Incremental Motion Control Systems and Devices Symposium, Champaign, IL, pp 259–270 (1993)
Mair M., Haas S., and Ellermann K.: Modeling of a rotor of an electrical machine using composite beam elements. In: International Conference on Electrical Machines (ICEM), pp. 1642–1647 (2014)
Gaul L. and Schmidt A.: Experimental identification and simulation of rotor damping. In: Dynamics of Coupled Structures, Vol. 1, pp. 209–218, Springer (2014)
Clappier M. and Gaul L.: Frequency domain dynamic simulation of an electrical machine rotor. In: Proceedings of ICSV 23, the International Congress on Sound & Vibration (2016)
Claesson, E.: Modelling of roller bearings in ABAQUS. MSc Thesis, Chalmers University (2014)
Heylen W., Lammens S. and Sas P.: Modal analysis theory and testing. Book, Katholieke Universteit Leuven, Departement Werktuigkunde (2006)
Guillaume P. et al.: Frequency-domain maximum likelihood identification of modal parameters with confidence intervals. In: Proceedings of ISMA 23, the International Conference on Noise and Vibration Engineering, Leuven, Belgium, 16–18 Sept (1998)
Peeters, B., et al.: The PolyMAX frequency-domain method: a new standard for modal parameter estimation? Shock. Vib. 11(3–4), 395–409 (2004)
Stefanskyi A., Dziechciarz A., Chauvicourt F., Sfakianakis G.E., Ramakrishnan K., Niyomsatian K., Curti M., Djukic N., Romanazzi P., Ayat S., Wiedemann S., Peng W., Stipetic S.: Researchers within the EU funded Marie Curie ITN project ADEPT, grant number 607361, (2013–2017).
Acknowledgements
The authors would like to acknowledge the financial support of the European Commission via the EU funded Marie Curie ITN project called ADvanced Electric Powertrain Technology (ADEPT), grant number 607361 [10].
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Chauvicourt, F., Ballweg, M., Desmet, W., Van der Auweraer, H., Faria, C.T. (2017). Experimental Study on the Rotor Dynamics Influence Upon the Modal Characteristics of an Induction Machine. In: Mains, M., Blough, J. (eds) Topics in Modal Analysis & Testing, Volume 10. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-54810-4_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-54810-4_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-54809-8
Online ISBN: 978-3-319-54810-4
eBook Packages: EngineeringEngineering (R0)