Skip to main content
SpringerLink
Log in

Numerical and Parametric Study of MVGs on a UAV Geometry in Subsonic Flow

  • Conference paper
  • First Online:
Computational Methods and Models for Transport (ECCOMAS 2015)

Part of the book series: Computational Methods in Applied Sciences ((COMPUTMETHODS,volume 45))

  • 822 Accesses

Abstract

This work details how numerical methods can be employed to determine the optimal arrangement of multiple micro vortex generators (MVG) installed on a UAV wing with its flaps deflected/deployed. For very little cost, the use of MVGs can substantially improve the aerodynamic performance of the UAV by increasing the lift and reducing the drag, particularly during critical phases of the flight (takeoff and landing). The optimal position, related to the detachment zone, and height, related to the boundary layer, of a vortex generator is studied numerically by solving the three dimensional Navier-Stokes equations in a simplified configuration. The numerical study includes a reference baseline configuration. A parametric study is then performed to determine, which configuration gives the maximum gain—highest lift/drag ratio. A preliminary numerical study of convergence for different grids to ensure convergency of the solutions is included. Finally, considering these results, a selection of the optimal configurations based on the aerodynamic performance and the manufacturing limitations.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 109.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 139.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 139.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  • Abbas A, De Vicente J, Valero E (2013) Aerodynamic technologies to improve aircraft performance. Aerosp Sci Technol 28(1):100–132

    Article  Google Scholar 

  • Anderson BH, Miller DN, Yagle PJ, Truax PP (1999) A study of MEMS flow control for the management of engine face distortion in compact inlet systems. In: FEDSM99-6920, 3rd ASME/JSME joint fluids engineering conference, San Francisco, CA

    Google Scholar 

  • Ashill PR, Fulker JL (1999) A review of flow control research at DERA. In: IUTAM symposium on mechanics of passive and active flow control. Springer, pp 43–56

    Google Scholar 

  • Ashill PR, Riddle GL, Stanley MJ (1995) Separation control on highly-swept wings with fixed or variable camber. Aeronaut J 99(988):317–327

    Google Scholar 

  • Ashill PR, Fulker JL, Hackett KC (2001) Research at DERA on sub boundary layer vortex generators (SBVGs). AIAA paper, vol 887

    Google Scholar 

  • Ashill PR, Fulker JL, Hackett KC (2002) Studies of flows induced by sub boundary layer vortex generators (sbvgs). AIAA paper 968:2002

    Google Scholar 

  • Ashill PR, Fulker JL, Hackett KC (2005) A review of recent developments in flow control. Aeronaut J 109(1095):205–232

    Article  Google Scholar 

  • Hamstra JW, Miller DN, Truax PP, Anderson BA, Wendt BJ (2000) Active inlet flow control technology demonstration. Aeronaut J 104(1040):473–479

    Google Scholar 

  • Holmes AE, Hickey PK, Murphy WR, Hilton DA (1987) The application of sub-boundary layer vortex generators to reduce canopy “Mach rumble” interior noise on the Gulfstream III. Rep./AIAA

    Google Scholar 

  • Jansen DP (2012) Passive flow separation control on an airfoil-flap model

    Google Scholar 

  • Jenkins L, Gorton S, Althoff, Anders S (2002) Flow control device evaluation for an internal flow with an adverse pressure gradient. AIAA paper 266

    Google Scholar 

  • Kerho M, Hutcherson S, Blackwelder RF, Liebeck RH (1993) Vortex generators used to control laminar separation bubbles. J Aircraft 30(3):315–319

    Article  Google Scholar 

  • Klausmeyer SM, Papadakis M, Lin JC (1996) A flow physics study of vortex generators on a multi-element airfoil. AIAA paper

    Google Scholar 

  • Kuya Y, Takeda K, Zhang X, Beeton S, Pandaleon T (2009) Flow separation control on a race car wing with vortex generators in ground effect. J Fluids Eng 131(12):121102

    Article  Google Scholar 

  • Lin JC, Howard FG, Bushnell DM, Selby GV (1990a) Investigation of several passive and active methods for turbulent flow separation control. In: 21st plasma dynamics and lasers conference AIAA, fluid dynamics, vol 1

    Google Scholar 

  • Lin JC, Howard FG, Selby GV (1990b) Small submerged vortex generators for turbulent flow separation control. J Spacecr Rockets 27(5):503–507

    Article  Google Scholar 

  • Lin JC, Selby GV, Howard FG (1991) Exploratory study of vortex-generating devices for turbulent flow separation control. AIAA paper

    Google Scholar 

  • Lin JC (2002) Review of research on low-profile vortex generators to control boundary-layer separation. Progr Aerosp Sci 38(4):389–420

    Article  Google Scholar 

  • Lin JC, Robinson SK, McGhee RJ, Valarezo WO (1994) Separation control on high-lift airfoils via micro-vortex generators. J Aircraft 31(6):1317–1323

    Google Scholar 

  • Liu C, Sun Z, Wang X, Yan Y (1999) Control of turbulent boundary-layer separation using micro-vortex generators. In: 30th fluid dynamics conference, american institute of aeronautics and astronautics, vol 1

    Google Scholar 

  • Liu C, Sun Z, Wang X, Yan Y (2013) The vortical structures in the rear separation and wake produced by a supersonic micro-ramp. In: 51st AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition, vol 1

    Google Scholar 

  • Lu F, Pierce AJ, Shih Y (2010a) Experimental study of near wake of micro vortex generators in supersonic flow. AIAA paper 4623:2010

    Google Scholar 

  • Lu FK, Li Q, Shih Y, Pierce AJ, Liu C (2011) Review of micro vortex generators in high-speed flow. In: 49th AIAA aerospace sciences meeting

    Google Scholar 

  • McCormick DC (1993) Shock/boundary-layer interaction control with vortex generators and passive cavity. AIAA J 31(1):91–96

    Article  Google Scholar 

  • M.White F (2003) Fluid mechanics. McGraw-Hill

    Google Scholar 

  • Nolan WR, Babinsky H (2011) Characterization of micro-vortex generators in supersonic flows. AIAA paper 71:2011

    Google Scholar 

  • Shan H, Jiang L, Liu C, Love M, Maines B (2008) Numerical study of passive and active flow separation control over a NACA0012 airfoil. Comput Fluids 37(8):975–992

    Article  MATH  Google Scholar 

  • Tai T (2002) Effect of micro-vortex generators on V-22 aircraft forward-flight aerodynamics

    Google Scholar 

  • Valarezo WO (1993) Topics in high-lift aerodynamics. In: 1993 AIAA 24th fluid dynamics conference

    Google Scholar 

  • Yao C-S, Lin JC, Allan BG (2002) Flow-field measurement of device-induced embedded streamwise vortex on a flat plate. NASA STI/Recon Technical report N 3:12931

    Google Scholar 

Download references

Acknowledgements

This work was supported by European Comission through the NNATAC GA 324298 project. And the computer resources, technical expertise and assistance provided by the Supercomputing and Visualization Center of Madrid.

Author information

Authors and Affiliations

  1. School of Aeronautics, Universidad Politecnica de Madrid, Plaza Cardenal Cisneros 3, 28040, Madrid, Spain

    Miguel Chavez

  2. ETSIA-UPM (School of Aeronautics), Universidad Politecnica de Madrid, 28040, Madrid, Spain

    Silvia Sanvido, Oliver M. F. Browne & Eusebio Valero

Authors
  1. Miguel Chavez
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Silvia Sanvido
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Oliver M. F. Browne
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Eusebio Valero
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Miguel Chavez .

Editor information

Editors and Affiliations

  1. CIMNE, International Center for Numerical Methods in Engineering, Barcelona, Spain

    Pedro Diez

  2. Department of Mathematical Information Technology, University of Jyväskylä, Jyväskylä, Finland

    Pekka Neittaanmäki

  3. Department of Mathematical Information Technology, University of Jyväskylä, Jyväskylä, Finland

    Jacques Periaux

  4. Department of Mathematical Information Technology, University of Jyväskylä, Jyväskylä, Finland

    Tero Tuovinen

  5. Department of Mathematical Information Technology, University of Jyväskylä, Jyväskylä, Finland

    Olli Bräysy

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this paper

Cite this paper

Chavez, M., Sanvido, S., Browne, O.M.F., Valero, E. (2018). Numerical and Parametric Study of MVGs on a UAV Geometry in Subsonic Flow. In: Diez, P., Neittaanmäki, P., Periaux, J., Tuovinen, T., Bräysy, O. (eds) Computational Methods and Models for Transport. ECCOMAS 2015. Computational Methods in Applied Sciences, vol 45. Springer, Cham. https://doi.org/10.1007/978-3-319-54490-8_13

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-54490-8_13

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-54489-2

  • Online ISBN: 978-3-319-54490-8

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation