Abstract
Newly developed products usually do not only face the market requirements. With the manufacturing induced properties it is possible to satisfy the constantly rising market requirements, e.g., in the mechanical engineering market or the building industry. Besides the original functions, the new products often have to meet other requirements such as lightweight construction, multifunctionality, reliable joints, or aesthetical demands.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Abedini S, Schäfer S (2012) Die Eigenschaftsverbesserung von Bauprodukten durch neue Fertigungstechnologien des SFB 666. In: Tagungsband 4. Zwischenkolloquium SFB 666, Darmstadt, 14–15 November 2012, p 131–136
Abedini S, Schäfer S (2016a) Sandwichelemente—Konventionelle Lösungen im Vergleich zu innovativen Weiterentwicklungen aus der Forschung. In: 11th Conference on Advanced Building Skins, Bern, Switzerland
Abedini S, Schäfer S (2016b) Qualitative assessment of joining techniques with flow split flanges. In: Anderson MST, Anderson PCO (eds) ACE 2016. Conference Proceedings of the 4th Annual International Conference on Architecture and Civil Engineering, Singapore
Abedini S, Schäfer S, Bäcker F, Ludwig C (2012) Geometric figures and potential component families of metal sheets for the use in architecture. In: Advanced Building Skins Conference 2012, Graz
Bäcker F, Ertuğrul M, Groche P (2010) A new process chain for forming individually curved sheet stringers. Int J Mater Form 3(1):837
Chryssolouris G (1996) Flexibility and its measurement. Ann CIRP 45(2):581–587
Diels H, Kranz W (1956) Die Fragmente der Vorsokratiker, 3 vol. 8th edn. Weidmann, Berlin
Erbar M, Schmitt W (2012) Flexibles Spaltprofilieren: Verfahrensentwicklung—implementierung und Prozessregelung. In: 8. Fachtagung Walzprofilieren & 4. Zwischenkolloquium SFB 666, Darmstadt, 14–15 November 2012
Fechner GT (1876) Vorschule der Ästhetik. Redaction of 1925 (posthum), 3rd edn. Breitkopf & Härtel, Leipzig, p 184–202
Grimshaw N, Hurd P (eds) (2011) Grimshaw architecture: the first thirty years. Prestel Publishing, Munich
Groche P, Schmitt W (2010) Verfahrensentwicklung zum flexiblen Spaltprofilieren. In: 3. Zwischenkolloquium SFB 666, Darmstadt, 29–30 September 2010
Groche P, Vucic D (2006) Multi-chambered profiles made from high-strength sheets. Production Engineering, Annals of the WGP 3(1):67–70
Groche P, Vucic D, Jöckel M (2005) Herstellung einteilig verzweigter Blechstrukturen. Wt Werkstattstechnik online 95(10)
Groche P, Ringler J, Vucic D (2007) New forming processes for sheet metal with large plastic deformation. In: Micari F, Geiger M et al (eds) Key engineering, vol 3, Palermo, Italy, p 251–258
Groche P, Taplick C, Özel M, Mahajan P, Stahl S (2016) Benefits of stress superposition in combined bending-linear flow splitting process. International Journal of Material Forming, 2016 (submitted)
Herbert J, Schäfer S (2008) Anwendungspotentiale im Bauwesen für integrale Blechbauweisen höherer Verzweigungsordnung. Der Bauingenieur 83:410–418
Krase W, Fischer V (2002) Opus 41: Nicholas Grimshaw & Partners: Halle 3, Messe Frankfurt am Main, Edition Axel Menges, Stuttgart, 2002
Kummle R, Weber H, Storbeck M, Beiter P, Berner S, Schmitt W, Groche P (2012) Walzprofilieren im Wandel—Bewährtes Verfahren, neue Flexibilität. In: 11. Umformtechnisches Kolloquium Darmstadt, Seeheim, 6–7 March 2012, pp 141–151
Lorenzer T (2010) Mehr Flexibilität zu niedrigeren Kosten. Umfrage zum Produktionszyklus in Fertigungsunternehmen. Eidgenössische Technische Hochschule Zürich, Institut für Werkzeugmaschinen und Fertigung
Mahajan P, Taplick C, Özel M, Groche P (2016) A study on springback of bending linear flow split profiles. International Deep Drawing Research Group (IDDRG) Conference, 2016, Linz, Austria
Neuwirth M, Özel M, Schmitt W, Rullmann F (2014a) Flexibles Spaltprofilieren: Verfahren und numerische Abbildung. In: 9. Fachtagung Walzprofilieren & 5. Zwischenkolloquium SFB 666, Mörfelden-Walldorf, 19–20 November 2014
Neuwirth M, Schmitt W, Groche P (2014b) On the Origin of Specimen: load-adapted integral sheet metal products. In: Procedia Engineering, Nagoya, vol 81, pp 310–315
Neuwirth M, Schmitt W, Groche P (2014c) On the Origin of Specimen: load-adapted integral sheet metal products. In: 11th International Conference on Technology of Plasticity, ICTP 2014, Nagoya, Japan, 19–24 October 2014
Neuwirth M, Özel M, Groche P (2016) Process characteristics in flexible flow splitting, steel research international, Wiley-VCH (submitted)
Özel M, Tijani Y, Rullmann F, Schmitt W, Eufinger J, Groche P, Tobias M (2014) Numerische Abbildung von Spaltprofilierprozessen und Bruchmechanische Beschreibung des Rissfortschrittsverhaltens von spaltprofilierten Strukturen. In: 9. Fachtagung Walzprofilieren & 5. Zwischenkolloquium SFB 666, Mörfelden-Walldorf, 19–20 November 2014
Pottman H et al (2007) Architectural geometry. Bentley Institute Press, Exton
Reising J, Schäfer S (2015) Flächentragwerke aus flexibel spaltprofilierten Blechbauteilen. Bautechnik 92(4):259–263
Schäfer S, Reising J, Abedini S, Bäcker F (2012) Definition of a tool library for the approximation of freeform surfaces. In: Zhang L et al (eds) ICAMMS 2012. International Conference on Advanced Material and Manufacturing Science 2012, Beijing, December 2012, p M1558
Schäfer S, Abedini S, Groche P, Bäcker F, Ludwig C, Abele E, Jalizi B, Müller C, Kaune V (2013) Verbindungstechniken durch die Technologie des SFB 666. Bauingenieur 88(1):8–13
Schmitt W, Rullmann F, Ludwig C, Groche P (2011) Entwicklungsstufen des Spaltprofilierens. In: Merklein M (ed) Tagungsband zum 1. Erlangener Workshop Blechmassivumformung 2011 DFG Transregio 73, Erlangen, 13 October 2011, p 53–76
Schmitt W, Brenneis M, Groche P (2012) On the development of flexible flow splitting. In: Proceedings of the 14th Metal Forming Conference, Wiley-VCH Verlag GmbH & Co., Weinheim, p 55–58
Terkaj W, Tolio T, Valente A (2009) Designing manufacturing flexibility in dynamic production contexts. In: Design of Flexible Production Systems. Springer, Berlin, pp 1–18
Wachsmann K (1959) Wendepunkt im Bauen. Rowohlt, Wiesbaden
Zimmermann A, Abedini S, Schäfer S (2013) Ästhetische Formgestalten in der Architektur, 2nd edn. Meisenbach, Darmstadt
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Abedini, S. et al. (2017). New Challenges: Technology Integrated Market-Pull. In: Groche, P., Bruder, E., Gramlich, S. (eds) Manufacturing Integrated Design. Springer, Cham. https://doi.org/10.1007/978-3-319-52377-4_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-52377-4_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-52376-7
Online ISBN: 978-3-319-52377-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)