Abstract
Ultrasonic melt processing is a promising technique for microstructural refinement in castings. Several mechanisms have been proposed for the observed effects, including cavitation-induced nucleation, activation of substrates and fragmentation. Until now, however, real-time experimental observations which could clarify any of the above mechanisms are very limited. For the first time we directly observed the fragmentation of primary crystals formed in alloys by ultrasonic cavitation. The primary crystals were extracted from real Al alloys and subjected to ultrasonic processing in water with in situ high-speed filming . The recordings of fragmentation of the primary crystals allowed us to observe the different mechanisms of fragmentation, depending on the mechanical properties and morphology of the primary crystals. The collapse of cavitation bubbles in water is less violent than that in liquid aluminum due to the lower cavitation threshold, viscosity and surface tension. Therefore the fragmentation mechanisms for the primary crystals observed in water should also be present for the same primary crystals in the more violent cavitation situation in liquid aluminum.
This is a preview of subscription content, log in via an institution to check access.
References
G.I. Eskin, D.G. Eskin, Ultrasonic treatment of light alloy melts (CRC Press, Boca Raton, Florida, 2015)
O.V. Abramov, High-intensity ultrasonics: theory and industrial applications (Gordon and Breach Science Publishers, Amsterdam, The Netherlands, 1998)
G.I. Eskin, Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys. Ultrason. Sonochem. 8, 319–325 (2001)
T.V. Atamanenko et al., Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing ZR and Ti. Metall. Mater. Trans. A 41, 2056–2066 (2010)
M. Qian et al., Ultrasonic refinement of magnesium by cavitation: clarifying the role of wall crystals. J. Cryst. Growth 311, 3708–3715 (2009)
A. Ramirez, M. Qian, Grain refinement of magnesium alloys by ultrasonic vibration, in TMS 2007 Annual Meeting and Exhibition, Orlando, FL, 2007, pp. 127–132
J.R.G. Sander et al., Sonocrystallization and sonofragmentation. Ultrason. Sonochem. 21, 1908–1915 (2014)
J.D. Hunt, K.A. Jackson, Nucleation of solid in an undercooled liquid by cavitation. J. Appl. Phys. 37, 254–257 (1966)
J.D. Hunt, K.A. Jackson, Nucleation of the solid phase by cavitation in an undercooled liquid which expands on freezing. Nature 211, 1080–1081 (1966)
G.M. Swallowe et al., A photographic study of the effect of ultrasound on solidification. Acta Metall. 37, 961–967 (1989)
R. Chow et al., The microscopic visualisation of the sonocrystallisation of ice using a novel ultrasonic cold stage. Ultrason. Sonochem. 11, 245–250 (2004)
R.M. Wagterveld et al., Visualization of acoustic cavitation effects on suspended calcite crystals. Ultrason. Sonochem. 18, 216–225 (2011)
D. Shu et al., A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation. Metall. Mater. Trans. A 43, 3755–3766 (2012)
Z. Guo et al., High-speed observation of the effects of ultrasound on liquid mixing and agglomerated crystal breakage processes. Powder Technol. 171, 146–153 (2007)
D. Tan et al., High-speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes. Metall. Mater. Trans. A 46, 2851–2861 (2015)
H. Huang et al., Synchrotron radiation X-ray imaging of cavitation bubbles in Al–Cu alloy melt. Ultrason. Sonochem. 21, 1275–1278 (2014)
I. Tzanakis et al., In situ observation and analysis of ultrasonic capillary effect in molten aluminium. Ultrason. Sonochem. 27, 72–80 (2015)
W.W. Xu et al., Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al-10Cu melts. Ultrason. Sonochem. 31, 355–361 (2016)
M. Kang et al., In situ and real-time observation of the solidification process of Al–20 mass%Cu Alloy by synchrotron X-ray radiography. Mater. Trans. 55, 774–778 (2014)
D. Ruvalcaba et al., In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy. Acta Mater. 55, 4287–4292 (2007)
P.D. Lee, J.D. Hunt, Hydrogen porosity in directional solidified aluminium-copper alloys: in situ observation. Acta Mater. 45, 4155–4169 (1997)
F. Wang et al., Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy. J. Cryst. Growth 435, 24–30 (2016)
M. Yamaguchi et al., Plastic deformation of the intermetallic compound Al3Ti. Philos. Mag. A 55, 301–315 (1987)
Y.V. Milman et al., Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis. Intermetallics 9, 839–845 (2001)
R. Elliott, Chapter 6—Primary-phase solidification in alloys close to the eutectic composition, in Eutectic Solidification Processing (Butterworth-Heinemann, 1983), pp. 232–307
Acknowledgements
The authors acknowledge the financial support from UK Engineering and Physical Science Research Council (EPSRC) for the Ultra-Cast project (grant EP/L019884/1, EP/L019825/1, EP/L019965/1). The authors are also grateful to Diamond Light Source Ltd for the loan of high speed camera.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Wang, F., Tzanakis, I., Eskin, D., Mi, J., Connolley, T. (2017). In Situ Observation of Fragmentation of Primary Crystals by Ultrasonic Cavitation in Water. In: Ratvik, A. (eds) Light Metals 2017. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-51541-0_29
Download citation
DOI: https://doi.org/10.1007/978-3-319-51541-0_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-51540-3
Online ISBN: 978-3-319-51541-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)