Abstract
This chapter describes the development of a module for micro electrical discharge machining with gaseous dielectrics, which was integrated into the machine frame as described in chapter “Introduction to the Priority Programme SPP1476—Small Machine Tools for Small Workpieces”. The module has implemented a high frequency gap width control, in which a solid-state joint-based unit was driven by piezo stack actuators. For this the development of a special control architecture that allowed a superimposed movement of the main axes and the piezo unit was necessary. The module has been tested on tool steel and fine grain hard metal as workpiece material. The process parameters for rough and fine machining were identified on an existing machining system and then transferred to the newly developed module. After the transmission of the parameters the processing results were compared with regard to the erosion duration tero and relative electrode wear ϑ.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Klocke, F., König, W.: Fertigungsverfahren 3. Abtragen, Generieren, Lasermaterialbearbeitung, 4th edn. Springer, Berlin, Heidelberg (2007)
Piltz, S.: Grundlagen und Prozessstrategien der Mikrofunkenerosion für die Bearbeitung von Rotationsbauteilen. In: Uhlmann, E. (Hrsg.) Berichte aus dem Produktionstechnischen Zentrum Berlin. Fraunhofer IRB, Stuttgart (2007)
Langmack, M.: Laserwendel- und funkenerosives Mikrobohren. In: Uhlmann, E. (Hrsg.) Berichte aus dem Produktionstechnischen Zentrum Berlin. Fraunhofer IRB, Stuttgart (2014)
Uhlmann, E.: T8 – Werkzeugmaschinen für die Mikroproduktion. In: Grote, Karl-Heinrich, Feldhusen, Jörg (eds.) Dubbel – Taschenbuch für den Maschinebau, 24th edn. Springer, pp. T118–T122 (2014)
Heisel, U., Klocke, F., Uhlmann, E., Spur, G.: Handbuch Spanen. Carl Hanser, München (2014)
Skrabalak, G., Kozak, J.: Study on dry electrical discharge machining. In: Proceedings of the World Congress on Engineering (WCE 2010), vol. III. London, 30 June–02 July 2010
Liu, K., Lauwers, B., Reynaerts, D.: Process capabilities of micro-EDM and its applications. Int. J. Adv. Manuf. Technol. 170 (2009)
Sourabh, K., Choudhury, S.K.: Experimental investigation and empirical modeling of the dry electric discharge machining process. Int. J. Mach. Tools Manuf 49, 297–308 (2009)
Roth, R.: Trockene Funkenerosion. Fortschrittberichte VDI: Reihe 2, Fertigungstechnik; Nr. 692; Zürcher Schriften zur Produktionstechnik. VDI-Verl., Düsseldorf (2015)
Balzer Technik SA AG, Domdidier, Schweiz. http://www.mikroproduktion.com/uploads/media/55-57-MI3_15_Balzer_Technik-final_ahik.pdf. Accessed 22 Nov 2015
DEUTSCHE EDELSTAHLWERKE GMBH, Germany. Datasheet URL: https://www.dew-stahl.com/fileadmin/files/dew-stahl.com/documents/Publikationen/Werkstoffdatenblaetter/RSH/1.4923_de.pdf. Accessed 24 June 2016
Hartmetall Gesellschaft Bingmann GmbH & Co, Germany. Datasheet URL: https://www.hmtg.de/information/Product%20Specification%20K10.pdf. Accessed 24 June 2016
Stahl-Informations-Zentrum., Germany. Datasheet URL. http://www.stahl-online.de/wp-content/uploads/2013/10/MB137_Zerspanen_von_Stahl.pdf. Accessed 24 Nov 2015
Aperam, Luxemburg. Datasheet URL: http://www.aperam.com/uploads/stainlesseurope/TechnicalDataSheet/FT%20Martensitique/FT_MART_en.pdf. Accessed 24 June 2016
KOMET GROUP GmbH, Germany. Datasheet URL: http://www.kometgroup.com/pdf/guideline/HMWerkzeuge.pdf. Accessed 24 June 2016
Goodfellow GmbH, Germany. Hompage URL: http://www.goodfellow.com/G/Wolframcarbid-Cobalt.html. Accessed 24 June 2016
Kleppmann, W.: Versuchsplanung. Produkte und Prozesse optimieren. Carl Hanser, München, Wien (2013)
Schimmelpfennig, T.-M.: Trockenfunkenerosives Feinbohren von Hochleistungswerkstoffen. In: Uhlmann, E. (Hrsg.) Berichte aus dem Produktionstechnischen Zentrum Berlin. Fraunhofer IRB, Stuttgart (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Perfilov, I., Streckenbach, J., Schimmelpfennig, TM., Uhlmann, E. (2017). Module for Micro Electrical Discharge Machining with Gaseous Dielectrics. In: Wulfsberg, J., Sanders, A. (eds) Small Machine Tools for Small Workpieces. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-49269-8_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-49269-8_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49267-4
Online ISBN: 978-3-319-49269-8
eBook Packages: EngineeringEngineering (R0)