Abstract
In cooperation of the two institutes FHR and IHE a high precision radar sensor was realised, which features a flexible integration in different micro machining modules. The feasibility of high precision and robust absolute measurements near the tool centre point is one of the main advantages of the radar technology. The realised radar sensor uses an integrated silicon-germanium (SiGe) transceiver chip which allows a cost-effective, energy-efficient, compact, and mass-market-capable solution. The system is working in the frequency range from 68 to 93 GHz providing a high modulation bandwidth of 25 GHz leading to a range resolution of a few mm and a record µm-accuracy. For improving the measurement and reducing the fabrication costs of this measurement system another sensor working at 240 GHz was developed as well. With a compact design of the measurement front-end a flexible integration even in constricted available space is possible. In combination with the Field Programmable Gate Array (FPGA) back-end measurement rates up to 100 Hz can be achieved, thus a closed loop control of the micro machining tool can be realised.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Pohl, N., Jaeschke, T., Aufinger, K.: An ultra-wideband 80 GHz FMCW radar system using a SiGe bipolar transceiver chip stabilized by a fractional-N PLL synthesizer. IEEE Trans. Microwav. Theory Tech. 60(3), 757–765 (2012)
Pohl, N., Gerding, M.: A dielectric lens-based antenna concept for high-precision industrial radar measurements at 24 GHz. In: 2012 9th European Radar Conference (EuRAD), pp. 405–408, Oct 2012
Bredendiek, C., Pohl, N., Jaeschke, T., Aufinger, K., Bilgic, A.: A 240 GHz single-chip radar transceiver in a SiGe bipolar technology with on-chip antennas and ultra-wide tuning range. In: 2013 IEEE Radio Frequency Integrated Circuits Symposium (RFIC), pp. 309–312 (2013)
Jaeschke, T., Bredendiek, C., Pohl, N.: A 240 GHz ultra-wideband FMCW radar system with on-chip antennas for high resolution radar imaging. In: 2013 IEEE MTT-S International Microwave Symposium Digest (IMS), pp. 1–4, June 2013
Thomas, S., Bredendiek, C., Pohl, N.: Comparison of inductor types for phase noise optimized oscillators in SiGe at 34 ghz. In: 2015 German Microwave Conference, pp. 288–291, March 2015
Thomas, S., Bredendiek, C., Jaeschke, T., Vogelsang, F., Pohl, N.: A compact, energy-efficient 240 GHz FMCW radar sensor with high modulation bandwidth. In: 2016 German Microwave Conference (GeMiC), pp. 397–400, March 2016
Ayhan, S., Pauli, M., Kayser, T., Scherr, S., Zwick, T.: FMCW radar system with additional phase evaluation for high accuracy range detection. In: European Radar Conference (EuRAD), pp. 117–120 (2011)
Pauli, M., Ayhan, S., Scherr, S., Rusch, C., Zwick, T.: Range detection with micrometer precision using a high accuracy FMCW radar system. In: 9th International Multi-Conference on Systems, Signals and Devices (SSD), pp. 1–4, March 2012
Ayhan, S., Scherr, S., Pahl, P., Kayser, T., Pauli, M., Zwick, T.: High-accuracy range detection radar sensor for hydraulic cylinders. IEEE Sensors J. 14(3), 734–746 (2014)
Ayhan, S., Scherr, S., Pahl, P., Walde, S., Pauli, M., Zwick, T.: Radar-based high-accuracy angle measurement sensor operating in the K-band. IEEE Sens. J. 15(2), 937–945 (2015)
Scherr, S., Ayhan, S., Fischbach, B., Bhutani, A., Pauli, M., Zwick, T.: An efficient frequency and phase estimation algorithm with CRB performance for FMCW radar applications. IEEE Trans. Instrum. Meas. 64(7), 1868–1875 (2015)
Ayhan, S.: Hochgenaue radarbasierte Abstandsmessung mit geführter Wellenausbreitung. KIT Scientific Publishing (2016)
Fleischer, J., Seemann, W., Zwick, T., Ayhan, S., Bauer, J., Kern, D., Scherr, S.: Antriebsmodul fr die Mikrobearbeitung. Werkstatt-technik online, vol. 11, no. 12 (2012)
Ayhan, S., Thomas, S., Kong, N., Scherr, S., Pauli, M., Jaeschke, T., Wulfsberg, J., Pohl, N., Zwick, T.: Millimeter-wave radar distance measurements in micro machining. In: IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet), pp. 65–68, Jan. 2015
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Scherr, S., Thomas, S., Pauli, M., Ayhan, S., Pohl, N., Zwick, T. (2017). High Accuracy Millimetre Wave Radar for Micro Machining. In: Wulfsberg, J., Sanders, A. (eds) Small Machine Tools for Small Workpieces. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-49269-8_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-49269-8_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49267-4
Online ISBN: 978-3-319-49269-8
eBook Packages: EngineeringEngineering (R0)