Advertisement

Design of Intermediate Frequency digital processing module based on AD9269

Conference paper
Part of the Lecture Notes on Data Engineering and Communications Technologies book series (LNDECT, volume 1)

Abstract

Digital Intermediate Frequency (DIF) is the key technology in software radio area. The DIF processing module of shortwave base on software radio technology has DIF processing to input signal, then complete Digital signal processing in digital area. In the DIF processing module, A/D and D/A are very important. It asks the A/D converter have enough working bandwidth (more than 2 GHz) and higher sampling velocity (60 MHz), and higher conversion digit to improve dynamic range. The new A/D converter AD9269 can meet the needs. This paper introduces the design of DIF processing module built on AD9269, and explains the interface design of DIF processing module.

Keywords

Automatic Gain Control Baseband Signal Software Radio Spurious Free Dynamic Range Master Degree Thesis 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Zhang Hongyu,: The PCB plate of digital receiver in the digital signal processor of DIF processing of software radio AD conversion, master degree thesis, University of Electronic Science and Technology of China (2006)Google Scholar
  2. 2.
    Zhuo Xingwang: The design and FPGA implementation of the demodulation system of digital correlator, master degree thesis, University of Electronic Science and Technology of China (2005)Google Scholar
  3. 3.
    Yang Xiaoniu, Lou Caiyi: The principle and application of software radio. Beijing, Tsinghua University Press (2003)Google Scholar
  4. 4.
    Attri, S.; Sohi, B.S; Chopra, Y.C: Efficient design of Application Specific DSP Cores Using FPGAS. ASSIC.2001. Proceeding 4th international conference on 23-25 Oct(2001)462-466.Google Scholar
  5. 5.
    AlalogDevicedInc.AD9269Datasheet.Google Scholar
  6. 6.
    Wepman A. Analog-to-digital Converters and Their Applications in Radio Receivers. IEEE Comu. Mag. 1995,33(5):46-54Google Scholar
  7. 7.
    Akos D M. Direct Bandpass Sampling of Multiple Distinct RF Signals.IEEE Transactions on Communications, 1999,47(7): 983-988Google Scholar
  8. 8.
    PN F901SC Data Sheet.1999-12Google Scholar
  9. 9.
    Donadio M P. CIC Filter Introduction. http://www.dspguru.comGoogle Scholar
  10. 10.
    F.Sheikh,S.Masud.Sample Rate Conversion Filter Design for Multi-standard software Radios. Digital Signal Processin, 2010,20(1):3-12Google Scholar
  11. 11.
    G.Dolecek,Simple Wideband CIC compensator. Electronics Letters,2009,45(24) 1270-1271Google Scholar
  12. 12.
    Lanying Zhang, Sijie Yuan. A Novel PCM/FM Demodulation Method Using DSTFT Analysis. Digital Object Identifier, ICOSP.2008:1775-1779Google Scholar
  13. 13.
    Research on the Method of Demodulation for PCM/FM Signal Based on Instantaneous Frequency Measurement. Digital Object Identifier,CESA.2006:93-96Google Scholar
  14. 14.
    P.Zicari, P.corsonello and S.Perri. An Efficient Bit-detection and Timing Recovery Circuit for FPGAs.Electronics, Circuits and Systems. FRANCE, 10-13 DEC 2006,1-3:168-171Google Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Engineering university of army police forceXi ’anChina

Personalised recommendations