Abstract
A Tuned Mass Damper (TMD) is a structural passive control device fixed on a structure and composed of a linear oscillator which natural frequency is tuned to that of the structure, or to the dominant resonance frequency. In this paper, an experimental TMD with adjustable stiffness and eddy current damping is proposed. The first step is to check if the dynamical properties of the proposed TMD are constant during the dynamic test and for different values of stiffness and damping. Therefore, the instantaneous modal parameters are evaluated by applying the continuous wavelet transform on the experimental data. Then, the TMD is set with optimal parameters and used to control vibrations of a frame scale model. The structure response with and without the TMD is evaluated from the experimental measurements in case of a shock applied to the top floor.
This is a preview of subscription content, access via your institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Allani A (2015) Conception et optimisation d’amortisseurs à masse accordée pour les structures du génie civil. PhD Thesis, Università di Roma Tor Vergata & Université Paris Est
Allemang RJ (2003) The modal assurance criterion—twenty years of use and abuse. Sound Vib 14–20
Asami T, Nishihara O, Baz AM (2001) Closed-form exact solution to \(H_2\) optimization of dynamic vibration absorber attached to damper linear systems. Trans Jpn Soc Mech Eng 67(655):597–603
Bae JS, Hwang JH, Roh JH, Kim JH, Yi MS, Lim JH (2012) Vibration suppression of a cantilever beam using magnetically tuned-mass-damper. J Sound Vib 331(26):5669–5684
Bekdaç G, Nigdeli SM (2011) Estimating optimum parameters of tuned mass dampers using harmony search. J Sound Vib 33:2716–2723
Den Hartog JP (1956) Mechanical vibrations. McGraw-Hill, New York
Ebrahimi B, Khamesee MB, Golnaraghi F (2008) Design and modeling of a magnetic shock absorber based on eddy current damping effect. J Sound Vib 315:875–889
Frham H (1909) Device for damped vibrations of bodies. U.S. Patent No. 989958, Oct. 30
Fujino Y, Abe M (1993) Design formulas for tuned mass dampers based on a perturbation technique. Earthquake Eng Struct Dyn 22(10):833–854
Gambarelli P, Vincenzi L (2015) A surrogate-assisted evolutionary algorithm for dynamic structural identification. CRC Press, Engineering Optimization IV
Gentile C (2007) Operational modal analysis of curved cable-stayed bridges, 2nd Int. Operational modal analysis conf, Copenaghen, Denmark
Graves KE, Toncich D, Iovenitti PG (2000) Theoretical comparison of motional and transformer EMF device damping efficiency. J Sound Vib 233(3):441–453
Greco R, Marano GC (2013) Optimum design of Tuned Mass Dampers by displacement and energy perspectives. Soil Dyn Earthq Eng 49:243–253
Hadi MN, Arfiadi Y (1998) Optimum design of absorber for MDOF structures. J Struct Eng 124(11):1272–1280
Kwok KCS, Samali B (1995) Performance of tuned mass dampers under wind loads. Eng Struct 17(9):655–667
Krenk S (2005) Frequency analysis of the tuned mass damper. J Appl Mech 72:936–942
Le TP, Argoul P (2004) Continuous wavelet transform for modal identification using free decay response. J Sound Vib 277(3):73–100
Lee C, Chen Y (2006) Optimal design theories and applications of tuned mass dampers. Eng Struct 28:43–53
Lo Feudo S, Allani A et al (2015) Experimental tuned mass damper based on eddy currents damping effect and adjustable stiffness. 12\(^{\grave{e}me}\) Colloque National en Calcul des structures
Mordini A, Savov K (2007) The finite element model updating: a powerful tool for structural health monitoring. Struct Eng Int 17(4):352–358
Nishihara O, Asami T (2002) Closed-form solutions to the exact optimizations of dynamic vibration absorbers (minimizations of the maximum amplitude magnification factors). J Vib Acoust 124(4):576–582
Rana R, Soong TT (1998) Parametric study and simplified design of tuned mass dampers. Eng Struct 20(3):193–204
Sadek F, Mohraz B, Taylor AW, Chung RM (1997) A method of estimating the parameters of tuned mass dampers for seismic applications. Earthq Eng Struct Dyn 26(6):617–636
Sodano HA, Bae J (2004) Eddy current damping in structures. Vib Shock Handb 36:469–478
Soong TT, Dargush GF (1997) Passive energy dissipation systems in structural engineering. Wiley, New York
Wang Z, Chen Z, Wang J (2012) Feasibility study of a large-scale tuned mass damper with eddy current damping mechanism. Earthq Eng Eng Vib 11(3):391–401
Zilletti M, Elliott SJ, Rustighi E (2012) Optimisation of dynamic vibration absorbers to minimise kinetic energy and maximise internal power dissipation. J Sound Vib 331:4093–4100
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Lo Feudo, S., Allani, A., Cumunel, G., Argoul, P., Maceri, F., Bruno, D. (2017). Experimental Analysis of a Tuned Mass Damper with Eddy Currents Damping Effect. In: Frémond, M., Maceri, F., Vairo, G. (eds) Models, Simulation, and Experimental Issues in Structural Mechanics. Springer Series in Solid and Structural Mechanics, vol 8. Springer, Cham. https://doi.org/10.1007/978-3-319-48884-4_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-48884-4_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48883-7
Online ISBN: 978-3-319-48884-4
eBook Packages: EngineeringEngineering (R0)