Abstract
Creep and fracture toughness experiments were performed on a commercially available magnesium-aluminum alloy (AM60) after three processing treatments: (1) As-Thixomolded® (as-molded), (2) Thixomolded® then thermomechanically processed (TTMP), and (3) Thixomolded® then TTMP then annealed (annealed). The conventional tensile-creep experiments were performed at applied stresses ranging between 20–75MPa and temperatures between 373–473K (100–200°C). In-situ tensile-creep tests were performed on selected samples. The as-molded material exhibited creep resistance superior to the thermomechanically processed materials. Creep experiments indicated grain boundary cracking, and grain size was expected to be an important micro structural parameter that affected the creep behavior. Fracture toughness experiments were performed at room temperature (RT) on single edge notched tension (SENT) samples. The TTMP and annealed materials exhibited fracture toughness values almost twice that of the as-molded material.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Chen, Z., et al., The Effect of Thermomechanical Processing on the Tensile and Fatigue Behavior of Thixomolded(R) AM60, in Magnesium Technology 2010, S.R. Agnew, et al., Editors. 2010, TMS: Seattle. p. 495–500.
Decker, R.F., et al., Magnesium Semi-Solid Metal Forming. Advanced Materials & Processes, 1996. 149(2): p. 41–42.
Boehlert, C.J., et al., In situ Scanning Electron Microscopy Observations of Tensile Deformation in a Boron-Modified Ti-6Al-4V Alloy. Scripta Materialia, 2006. 55(5): p. 465–468.
Cowen, C.J. and C.J. Boehlert, Comparison of the Micro structure, Tensile, and Creep Behavior for Ti-22Al-26Nb (at. pct) and Ti-22Al-26Nb-5B (at. pct). Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2007. 38A(1): p. 26–34.
Quast, J.P. and C.J. Boehlert, Comparison of the Micro structure, Tensile, and Creep Behavior for Ti-24Al-17Nb-0.66Mo (atomic percent) and Ti-24Al-17Nb-2.3Mo (atomic percent) Alloys. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2007. 38A(3): p. 529–536.
Hartman, G.A. and S.M. Russ, Techniques for Mechanical and Thermal Testing of Ti3Al/SCS-6 Metal Matrix Composites, in Metal Matrix Composites: Testing, Analysis and Failure Modes, W.S. Johnson, Editor. 1989, American Society for Testing and Materials: Philadelphia, PA. p. 43–53.
Anderson, T.L., Fracture Mechanics: Fundamentals and Applications. 1991, Boca Raton, FL: CRC Press, Inc. 793.
Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, in Annual Book of ASTM Standards, vol. 03.01. 2000, American Society for Testing and Materials: Philadelphia, PA. p. 431–461.
Mordike, R.L. and P. Lukac. in Proceedings of the 3rd International Magnesium Conference. 1997. London, England: The Institute of Metals.
Maruyama, K., M. Suzuki, and H. Sato, Creep Strength of Magnesium-Based Alloys. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2002. 33(3): p. 875–882.
Boehlert, C.J., The Tensile and Creep Behavior of Mg-Zn Alloys with and without Y and Zr as Ternary Elements. Journal of Materials Science, 2007. 42(10): p. 3675–3684.
Dargusch, M.S. and G.L. Dunlop, in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, Editors. 1998, Werkstoff-Informationsgesellschaft: Frankfurt, Germany. p. 277–282.
Regev, M., et al., Creep Studies of Coarse-Grained AZ91D Magnesium Castings. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 1998. 252(1): p. 6–16.
Regev, M., E. Aghion, and A. Rosen, Creep Studies of AZ91D Pressure Die Casting. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 1997. 234: p. 123–126.
Dieter, G.E., Mechanical Metallurgy. 1986, New York: McGraw-Hill.
Uchida, H. and T. Shinya, J. Jpn. Inst. Light Metals, 1995. 45(10): p. 572.
Vagarali, S.S. and T.G. Langdon, Deformation Mechanisms in Hcp Metals at Elevated-Temperatures.2. Creep-Behavior of a Mg-0.8-Percent Al Solid-Solution Alloy. Acta Metallurgica, 1982. 30(6): p. 1157–1170.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Chen, Z., Huang, J., Decker, R., LeBeau, S., Boehlert, C.J. (2011). The Effect of Thermomechanical Processing on the Creep Behavior and Fracture Toughness of Thixomolded® AM60 Alloy. In: Sillekens, W.H., Agnew, S.R., Neelameggham, N.R., Mathaudhu, S.N. (eds) Magnesium Technology 2011. Springer, Cham. https://doi.org/10.1007/978-3-319-48223-1_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-48223-1_18
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48568-3
Online ISBN: 978-3-319-48223-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)