Abstract
The energy saving technologies for anode manufacturing have been developed and applied in the anode production processes in Jinan Aohai Carbon Products Corporation Ltd. The surplus heat from shaft calciners is recovered for heating pitch and mixer and power generation as well. The baking furnace structure and the lining materials have been improved so as to get reasonable anode occupation efficiency and less heat loss. The heating curves for anode baking are finely adjusted and controlled for completely burning of the volatiles in the green anodes for less energy input into the baking furnace. Based on the technology application mentioned above a great energy saving and benefit to the plant environment have been achieved in Aohai anode plants.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Li H., Gu S., Li J. & Liu F. Technology Handbook of Aluminum Production (in chinese). (Beijing, Metallurgy Industry Publishing House 2011)
Fengqin Liu, Chinese Raw Materials for Anode Manufacturing, (Switzerland: R&D Carbon Ltd., 2004)
Li Xiuli, “Feasibility study of using waste heat to generate electric power which comes from the gas of pottype calciner”,. Applied Energy Technology (in Chinese). (1) (2010), 36–39
Zhao Jingli et al. “New Generation of Vertical Shaft Calciner Technology” Light Metals 2011, 917–921
Kang Zhiqiang et al. “Three dimension simulation and optimization design of anode baking furnace”, Light Metals (in chinese) 2009 (3) 39–42
Gu Songqing, Wu Lichun, Liu Fengqin et al., Progresses of Nonferrous Metals in China (in chinese), (Changsha, China, Central South University Publishing House. 2007)
Chang Xianen, Chen Kaibin. “Energy Saving Techniques of Carbon Anode Baking Furnace for Aluminum Electrolysis”, Carbon Techniques (in chinese) 2007, Vol.26 (5) 33–35
Zhu Shifa et al. “The optimizing and practices of carbon anode baking process”, Light Metals (in chinese) 2010 (6)
Gan Jinjun, “Improvement of Anode Baking Technology and Reduction of Production Energy Consumption”, Energy Saving Of Non-Ferrous Metallurgy (in chinese) 2009, Vol.24 (1) 41–44
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Qingcai, Z., Jingli, Z., Xingli, M., Lihai, W. (2012). Energy Saving Technologies for Anode Manufacturing. In: Suarez, C.E. (eds) Light Metals 2012. Springer, Cham. https://doi.org/10.1007/978-3-319-48179-1_207
Download citation
DOI: https://doi.org/10.1007/978-3-319-48179-1_207
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48570-6
Online ISBN: 978-3-319-48179-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)