Abstract
The heat losses of aluminium reduction cells depend strongly on the heat transfer coefficients between the bath and side ledge or anodes. Using of anodes with slots can greatly change heat transfer. In order to investigate the heat loss dynamics in reduction cells with slotted anodes, a modeling of heat transfer coefficients in cells was firstly undertook. This enables understanding of how slotted anode changes heat dissipation from the bath. Then, a thermal field was been calculated by using heat transfer coefficients obtained in the first step. All these studies were carried out with 500kA cells.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Feng Naixiang, Tian Yingfu, Peng Jianping, et al. New Cathodes in Aluminum Reduction Cells. Light Metals 2010: 405–408
LI Jie, LV Xiao-jun, ZHANG Hong-liang, LIU Yexiang. Development of low-voltage energy-saving aluminum reduction technology. Light Metals 2013: 557–559
Yingfu Tian, Hesong Li, Longhe Wei, Xi Cao, Jianguo Yin. Industry test of perforation anode in aluminum electrolysis technology. Light Metals 2013: 567–571
Meier M W, Perruchoud R C, Fischer W K. Production and performance of slotted anodes. Light Metals 2007: 293–298.
Doheim M A, El-Kersh A M, Ali M M. Computational modeling of flow in aluminum reduction cells due to gas bubbles and electromagnetic forces. Metallurgical and Materials Transactions B, 2007, 38(1): 113–119
LI Jie, XU Yu- jie, ZHANG Hong liang, LAI Yan-qing. An inhomogeneous three -phase model for the flow in aluminium reduction cells. International Jour nal of Multiphase Flow, 2011, 37(1): 46–54.
Severo D S, Gusberti V, Pinto E C V, Moura R R. Modeling the Bubble Driven Flow in the Electrolyte as a Tool for Slotted Anode Design Improvemen. Light Metals 2007: 287–292.
Cooksey M A, Yang W. PIV Measurements on Physical Models of Aluminium Reduction Cells. Light Metals 2006: 485–488359–365.
Severo D S, Gusberti V. A modeling approach to estimate bath and metal heat transfer coefficients. Light Metals 2009: 557–562
Solheim A. Towards a Proper Understanding of Sideledge Facing the Metal in Aluminum Cells? Light Metals 2006: 367–369
Kader B A.Temperature and Concentration Profiles in Fully Turbulent Boundary Layers. International Journal of Heat and Mass Transfer, 1981, 24(9): 1541–1544.
Dupuis M, Bojarevics V. Weakly coupled thermoelectric and MHD mathematical models of an aluminum electrolysis cell. Light Metals 2005: 449–454
Yang Shuai, Zhang Hongliang, Xu Yujie, et al. Effects of slot cutting at prebaked anodes on buble elimination in aluminum reduction cell .Journal of Central South University, 2012, 43(12): 4617–4625.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Shuai, Y., Jie, L., Yujie, X., Hongliang, Z., Xiaojun, L., Ming, J. (2014). A Modelling of Heat Losses in Aluminium Reduction Cell With Slotted Anodes. In: Grandfield, J. (eds) Light Metals 2014. Springer, Cham. https://doi.org/10.1007/978-3-319-48144-9_112
Download citation
DOI: https://doi.org/10.1007/978-3-319-48144-9_112
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48590-4
Online ISBN: 978-3-319-48144-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)