Abstract
The present paper reviews the present potential of magnesium and its alloys as structural light-weight material in transportation industry. An overview will be given on the state of the art in casting technologies of magnesium alloys in order to broaden possible applications in light weight construction. Further, wrought magnesium will be emphasized as a challenge for developing magnesium towards a competitive constructional material. Future needs in all regards involve further alloy development which has to need the special requirements for each process. An overview on actual research activities in Europe and also especially in Germany will be given.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
H. Friedrich, S. Schumann, J. Mat. Processing Technology 117 (2001) 276–281.
H. Dieringa, P. Maier, D. Fechner, J. Bohlen, K. U. Kainer, Proceedings of the First Russian International Conference and Exhibition of Magnesium — Broad Horizons, 29.11–01.12.2005.
J. Fischer, G. Becker, In: Magnesium — Eigenschaften, Anwendungen, Potenziale, edited by K.U. Kainer, VCH Wiley Weinheim (2000), 99–110.
A. Beck, Magnesium und seine Legierungen, Springer, Berlin (1939).
D. Webb: Magnesium Supply and Demand 2004; presented at “IMA Annual Conference” Berlin (D) 2005;http://www.intlmag.org
A.A. Luo: Recent magnesium alloy development for powertrain applications; Mat. Sci. Forum 419–422 (2003) 57–66.
E. Aghion et al.: The environmental impact of new magnesium alloys on the transportation industry; Magnesium Technology 2004 Editor: A.A. Luo, TMS (2004) 167–172.
A. Barth: Mg application in the 7G Tronic gear; Proc. 61st Annual World Magnesium Conference 2004 New Orleans/USA (2004) 81–86.
C.J. Bettles et al.: AMC SCI: A new magnesium alloy suitable for powertrain applications; SAE Technical Paper 2003-01-1365, (2003).
M.O. Pekguleryuz and A.A. Kaya: Magnesium diecasting alloys for high temperature applications; Magnesium Technology 2004 Editor: A.A. Luo, TMS (2004) 281–287.
M.O. Pekguleryuz et al.: Magnesium diecasting alloy AJ62x with superior creep resistance; Magnesium Technology 2003 Ed.: H.I. Kaplan, TMS (2003) 201–206.
E. Baril et al.: AJ (Mg-Al-Sr) alloy system used for new engine block; SAE Technical Paper Series 2004-01-0659.
J. E. Hillis, The international program to identify alternatives to SF6 for magnesium melt protection, The International Conference on SF6 and the Environment, 2002, San Diego, California, USA
G. Tranell, T. A. Engh, Alternatives to SF6 for the magnesium processor — A technical, environmental and econonomic assessment, Proc. 61st Annual World Magnesium Conference 2004, New Orleans, Louisiana, USA, 161–174
S. P. Cashion, et al., The protection of molten magnesium and its alloys during die casting, The Annual IMA Automotive Seminar, 2000, Aalen, Germany
D. Milbrath, Development of 3M Novec 612 Magnesium protection fluid as substitute for SF6 over molten magnesium, The International Conference on SF6 and the Environment, 2002, San Diego, California, USA
G. Franke, J. Schlimbach, Use of SO2 as protection gas for Mg-recycling, Proc. 61st Annual World Magnesium Conference 2004, New Orleans, Louisiana, USA, 185–190
K. Renger, et al., The protection of molten magnesium by SO2 gas mixtures, Proc. 61st Annual World Magnesium Conference 2004, New Orleans, Louisiana, USA, 191–198
R. Bailey, N. Ricketts, AM-cover: A production proven SF6 replacement for the magnesium die casting industry, Proc. 61st Annual World Magnesium Conference 2004, New Orleans, Louisiana, USA, 199–204
F.-W. Bach, A. Karger, C. Pelz, M. Schaper, Use of C02-Snow for Protecting Molten Magnesium from Oxidation, In: Magnesium Technology 2005, Eds.: Neale R. Neelameggham, Howard I. Kaplan and Bob R. Powell (2005) 33–36.
C.J. Bettles, M.A. Gibson, JOM 5 (2005)46 — 49.
F.-W. Bach, M. Rodmann, A. Roßberg, Materialprüfung, 47 (2005) 661–665.
A. Ahmadieh, Jack Mitchell, J.E. Dorn, Trans. Met. Soc. AIME (1965) 1130–1138.
Y. C. Lee, A. K. Dahle and D. H. StJohn, Metallurgical and Materials Transactions, Nov. 2000, 31A, 11, pp. 2895–2906.
P. Li, B. Tang, E.G. Kandalova, Materials Letters 59 (2005) 671–675.
T. Laser, M. R. Nürnberg, A. Janz, Ch. Hartig, D. Letzig, R. Schmid-Fetzer, R. Bormann, Acta Materialia (2006) accepted.
S.R. Agnew: Plastic Anisotropy of Magnesium Alloy AZ31B Sheet, Proceedings TMS 2002, Seattle, pp. 169–174.
P. Bogon: Werkzeugtechnik zur Magnesium-Blechunformung — ein Beispiel; www.UTFscience.de 2 (2005) 1–10.
W.H. Sillekens, D. Letzig, Proceedings DGM Conference Magnesium, Dresden 2006 (2006) in press
J. Bohlen, J. Swiostek, W.H. Sillekens, P.-J. Vet, D. Letzig, K.U. Kainer, In: Neale R. Neelameggham, Howard I. Kaplan, Bob R. Powell Ed. „Magnesium Technology 2005“, TMS Annual Meeting San Francisco (2005), 241.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Dieringa, H., Bohlen, J., Hort, N., Letzig, D., Kainer, K.U. (2016). Advances in Manufacturing Processes for Magnesium Alloys. In: Mathaudhu, S.N., Luo, A.A., Neelameggham, N.R., Nyberg, E.A., Sillekens, W.H. (eds) Essential Readings in Magnesium Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-48099-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-48099-2_3
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48588-1
Online ISBN: 978-3-319-48099-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)