DeSIRE 2: Satcom Modeling and Simulation a Powerful Tool to Enable Cost Effective and Safe Approach to RPAS Operational Deployment
Drones are a breakthrough systemic solution for a number of applications, from institutional and governmental purposes to a wide range of possible commercial applications. Autonomous and remotely controlled machines, fully integrated with many devices all connected wherever they are, are going to be a major part of the Internet of Things (IoT), where satellite communication plays a pivotal role.
Modelling and Simulation (M&S) are very helpful tools in the design and risk reduction of sustainable integration of Autonomous Systems into cost effective operational activities. As matter of fact, the M&S approach is extensively used in the DeSIRE 2 (Demonstration of the use of Satellites complementing Remotely Piloted Aircraft Systems integrated in non-segregated airspace 2nd Element). The ongoing Project, recently launched by the European Space Agency and the European Defence Agency, aims to demonstrate a service based on a Remotely Piloted Aircraft (RPA) flying in Beyond Radio Line of Sight (BRLOS) using space assets (SatCom, SatNav). The project has been kicked off in April 2015, after a selective process among important European consortia, and is leaded by Telespazio.
Decrease costs, considering the loop “designing, building, testing, redesigning, rebuilding, retesting”;
Make easier the “what-if” definition and analysis allowing the definition and experimentation and test of CONOPS;
De-risk the overall project.
To characterize adequately the Satcom link of DeSIRE 2 against the stringent performance requirements of the aeronautical context, an intensive measurement campaign is required. Concerning flight, the testing hours for a large RPAS are very costly. Therefore, it has been decided to add to the experimental flight campaign a combination of simulated and emulated environments, which replicate, as much as possible, the real operational conditions.
The models used in the simulation will be refined during the iterations, increasing the robustness and reliability, thus, making available results otherwise difficult, costly and even dangerous to be experiment directly in the real world.
An overview of the main expected results and how they should support the European standardisation and regulatory activities in the framework of the Air Traffic Insertion (ATI), especially for the definition of future satellite-based command & control datalinks, will be given as well. The paper will explain how the project intends to characterise the Satcom command and control datalinks for both Ka and L frequency bands.
Mission Simulation, including satcom, airborne, mission applications and combination of the above segments;
(Satcom) Emulation with real satellite full communication and RPA/RPS simulators.
Mixed simulation and emulation will also be considered and real hardware will be introduced in the simulation loop (e.g. real satellite transponders and on board satcom terminals);
At any stage of this iteration, the results will be fed-back into the simulation/emulation chain. For example, the measured jitter and error rates will be introduced to update the parameters for the simulators for more trustworthy results.
KeywordsGlobal Navigation Satellite System Global Navigation Satellite System Simple Network Management Protocol Mission Simulation Remotely Pilot Aircraft
- 1.EUROPEAN COMMISSION: Towards a European strategy for the development of civil applications of Remotely Piloted Aircraft Systems (RPAS)Google Scholar
- 2.ERSG: European RPAS RoadmapGoogle Scholar
- 3.DESIRE D13 Final ReportGoogle Scholar
- 4.JARUS: RPAS C2 link Required Communication Performance (C2 link RCP) ConceptGoogle Scholar
- 5.JARUS: Guidance on RPAS C2 link Required Communication PerformanceGoogle Scholar
- 6.ICAO: Doc 9869 AN/462, Manual on Required Communication Performance (RCP)Google Scholar
- 7.ICAO: Doc 10019 AN/507, Manual on Remotely Piloted Aircraft Systems (RPAS)Google Scholar