Abstract
In architecture and construction engineering, a vast number of connections and branched columns in frame structures exist that are exposed to high static and dynamic loads. The manufacture of many of these elaborate structures is both time-consuming and costly. Industry has no solution for cost-effectively producing aesthetic and mechanically stable branched columns. This challenge is addressed by the development of branched structures inspired by branched biological concept generators such as Schefflera arboricola. Here, we present methodological approaches allowing the reconstruction of the outer shape and inner structure of complex branching regions, such as in S. arboricola, by using and combining three-dimensional-image stacking of histological thin sections, micro-computer-tomography (μCT) imaging and laser scanning. Computer-aided design (CAD) and Finite Element (FE) models of such structures can then be produced that not only help to provide a better understanding of the functional morphology and biomechanics of the biological concept generator, but also render the basis for the intended biomimetic transfer to branched columns consisting of a braided hull filled with concrete. The current project results are mainly based on the analysis of S. arboricola branching and the results of a previous research project (SPP 1420) in which biomimetic branched fibre-reinforced plastic (FRP) columns inspired by the branching structure of Dracaena were produced. Currently a biomimetic hull geometry that can be manufactured industrially is developed. Initially, branched FRPs based on triaxial braids with readily adjustable mechanical properties are filled with concrete and thus shall achieve sufficient mechanical properties for application and cost-effective fabrication in the building industry.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- FRP:
-
Fibre-Reinforced Plastic
- RC:
-
Reinforced Concrete
- SPP 1420:
-
Priority Programme 1420 by the DFG
- DFG:
-
German Research Foundation
- MRI:
-
Magnetic Resonance Imaging
- μCT:
-
Micro-Computer-Tomography
- FE-Model:
-
Finite Element-Model
- CAD:
-
Computer Aided Design
References
Bilisik K (2013) Three-dimensional braiding for composites: a review. Text Res J 83:1414–1436. doi:10.1177/0040517512450766
Davol A, Burgueño R, Seible F (2001) Flexural behavior of circular concrete filled FRP shells. J Struct Eng 127:810–817. doi:10.1061/(asce)0733-9445(2001)127:7(810)
Eid R, Roy N, Paultre P (2009) Normal- and high-strength concrete circular elements wrapped with FRP composites. J Compos Constr 13:113–124. doi:10.1061/(asce)1090-0268(2009)13:2(113)
Fazeli M, Kern M, Hoffman G et al (2016) Development of three-dimensional profiled woven fabric on narrow fabric looms. Text Res J 86(12):1328–1340. doi:10.1177/0040517515606361
Gola E (2014) Dichotomous branching: the plant form and integrity upon the apical meristem bifurcation. Front Plant Sci 5:263. doi:10.3389/fpls.2014.00263
Hallé F, Oldeman R, Tomlinson PB (1978) Tropical trees and forests. Springer, Berlin/Heidelberg
Haushahn T, Schwager H, Neinhuis C et al (2012) Plant ramifications inspire branched lightweight composites. Bioinspired Biomim Nanobiomater 1:77–81. doi:10.1680/bbn.11.00011
Haushahn T, Speck T, Masselter T (2014) Branching morphology of decapitated arborescent monocotyledons with secondary growth. Am J Bot 101:754–763. doi:10.3732/ajb.1300448
Hesse L, Masselter T, Leupold J et al (2016) Magnetic resonance imaging reveals functional anatomy and biomechanics of a living dragon tree. Sci Rep 6:32685. doi:10.1038/srep32685
Hufenbach W, Böhm R, Thieme M et al (2011a) Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications. Mater Des 32:1468–1476. doi:10.1016/j.matdes.2010.08.049
Hufenbach W, Gude M, Cichy F et al (2011b) Simulation of branched biological structures for bionic inspired fibre-reinforced components. Kompozyty/Composites 11:304–309
Hufenbach W, Gruhl A, Lepper M et al (2013) Verfahren für die Fertigung komplexer Faserverbund-Hohlstrukturen. Lightw Des 2:44–48
Iwamoto A, Matsumura Y, Ohba H et al (2005) Development and structure of trichotomous branching in Edgeworthia chrysantha (Thymelaeaceae). Am J Bot 92:1350–1358. doi:10.3732/ajb.92.8.1350
Kadereit J, Körner C, Kost B et al (2014) Strasburger. Lehrbuch der Pflanzenwissenschaften (37.Auflage). Springer Spektrum, Berlin/Heidelberg. doi:10.1007/978-3-642-54435-4
Kull U, Herbig A (1987) Pflanzen als natürliche Konstruktionen – oder das Prinzip Leichtbau. Arcus 1:11–16
Kupfer H (1973) Das Verhalten des Betons unter mehrachsiger Kurzzeitbelastung unter besonderer Berücksichtigung der zweiachsigen Beanspruchung. Deutscher Ausschuss für Stahlbeton 229:1–131
Kwan A, Dong C, Ho J (2015) Axial and lateral stress–strain model for FRP confined concrete. Eng Struct 99:285–295. doi:10.1016/j.engstruct.2015.04.046
Kyosev Y (2015) Braiding technology for textiles. Elsevier/Woodhead Publishing Limited, Cambridge
Lam L, Teng J (2003) Design-oriented stress–strain model for FRP-confined concrete. Constr Build Mater 17:471–489. doi:10.1016/s0950-0618(03)00045-x
Masselter T, Eckert S, Speck T (2011) Functional morphology, biomechanics and biomimetic potential of stem–branch connections in Dracaena reflexa and Freycinetia insignis. Beilstein J Nanotechnol 2:173–185. doi:10.3762/bjnano.2.21
Masselter T, Hesse L, Leupold J et al (2015) Using MRI for analyzing the anatomy and biomechanics of monocotyledons. In: The 8th plant biomechanics conference. Nagoya University, Nagoya, Japan, pp 230–234
Mattheck C (1998) Design in nature. Springer, Berlin/Heidelberg
Milwich M, Speck T, Speck O et al (2006) Biomimetics and technical textiles: solving engineering problems with the help of nature’s wisdom. Am J Bot 93:1455–1465. doi:10.3732/ajb.93.10.1455
Milwich M, Speck T, Speck O et al (2008) The role of plant stems in providing biomimetic solutions for innovative textiles in composites. In: Ellison MS, Abbot AG (eds) Biologically inspired textiles. Blackwell, New York/London, pp 168–192
Mirmiran A, Shahawy M (1996) A new concrete-filled hollow FRP composite column. Compos Part B 27:263–268. doi:10.1016/1359-8368(95)00019-4
Mirmiran A, Shahawy M (1997) Behavior of concrete columns confined by fibre composites. J Struct Eng 123:583–590. doi:10.1061/(asce)0733-9445(1997)123:5(583)
Mountasir A, Löser M, Hoffmann G et al (2015a) 3D woven near-net-shape preforms for composite structures. Adv Eng Mater 18:391–396. doi:10.1002/adem.201500441
Mountasir A, Hoffmann G, Cherif C et al (2015b) Competitive manufacturing of 3D thermoplastic composite panels based on multi-layered woven structures for lightweight engineering. Compos Struct 133:415–424
Müller L, Gruhl A, Böhm H et al (2013) Biomimetisch optimierte verzweigte Faserverbundstrukturen mit hoher Tragfähigkeit. Melliand Textilberichte 2:88–93
Otto F (1982) Natürliche Konstruktionen. Dt. Verl.-Anst, Stuttgart
Ranz T (2007) Ein feuchte- und temperaturabhängiger anisotroper Werkstoff: Holz. Univ. der Bundeswehr München (Beiträge zur Materialtheorie)
Saafi M, Toutanji H, Li Z (1999) Behavior of concrete columns confined with fiber reinforced polymer tubes. ACI Mater J 96:500–509. doi:10.14359/652
Schwager H, Haushahn T, Neinhuis C et al (2010) Principles of branching morphology and anatomy in arborescent monocotyledons and columnar cacti as concept generators for branched fibre-reinforced composites. Adv Eng Mater 12:B695–B698. doi:10.1002/adem.201080057
Schwager H, Masselter T, Speck T, Neinhuis C (2013) Functional morphology and biomechanics of branch-stem junctions in columnar cacti. Proc R Soc B 280:20132244. doi:10.1098/rspb.2013.2244
Speck K (2008) Beton unter mehraxialer Beanspruchung. Ein Materialgesetz für Hochleistungsbetone unter Kurzzeitbelastung. Technische Universität Dresden
Speck T, Burgert I (2011) Plant stems: functional design and mechanics. Annu Rev Mater Res 41:169–193. doi:10.1146/annurev-matsci-062910-100425
Tomlinson PB, Fisher JB, Hallé F, Villalobos R (2005) Development of woody branch attachments in Schefflera (Araliaceae or Apiaceae). Am J Bot 92:1765–1773. doi:10.3732/ajb.92.11.1765
Xiao Y, Wu H (2000) Compressive behavior of concrete confined by carbon fibre composite jackets. J Mater Civ Eng 12:139–146. doi:10.1061/(asce)0899-1561(2000)12:2(139)
Yip J, Ng S-P (2008) Study of three-dimensional spacer fabrics: physical and mechanical properties. J Mater Process Technol 206:359–364. doi:10.1016/j.jmatprotec.2007.12.073
Zimmermann MH, Tomlinson PB (1970) The vascular system in the axis of Dracaena fragrans (Agavaceae) 2. Distribution and development of secondary vascular tissue. J Arnold Arboretum 51:478–491
Acknowledgements
We thank the two reviewers for their helpful comments and suggestions which have significantly improved the manuscript. This work has been funded by the German Research Foundation (DFG) as part of the Transregional Collaborative Research Centre (SFB/Transregio) 141‘Biological Design and Integrative Structures’/project A06.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Born, L. et al. (2016). Branched Structures in Plants and Architecture. In: Knippers, J., Nickel, K., Speck, T. (eds) Biomimetic Research for Architecture and Building Construction. Biologically-Inspired Systems, vol 8. Springer, Cham. https://doi.org/10.1007/978-3-319-46374-2_10
Download citation
DOI: https://doi.org/10.1007/978-3-319-46374-2_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-46372-8
Online ISBN: 978-3-319-46374-2
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)