Abstract
This paper presents an approach for modelling and simulating of harvester head mechanism in the harvesting process of hardwood stands. This type of trees is characterized by flexuous trunks and big branches. Hence, the current harvester heads are not enough efficient to process such trees. In order to predict the process performances associated with several novel architectures of harvester heads, in preliminary design stage, a modelling of the process has been developed. It is based on parameterized tree models with realistic geometry by adapting an existing method. Dynamic modelling of the delimbing process proposed in this paper uses original cutting and feeding models which have been validated experimentally. The modelling and simulation of harvester head mechanisms have been implemented in a numerical multibody environment. Simulation results of the global model are in a good agreement with the observed behaviour of the real system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Cacot, E., Bigot, M., Cuchet, E.: Developing full-mechanized harvesting systems for broadleaved trees: a challenge to face the reduction of the manual workforce and to sustain the supply of hardwood industries. In: 29th Council on Forest Engineering (COFE) Conference Proceedings: “Working globally—Sharing forest engineering challenges and technologies around the world” (2006)
Ćuprić, L., Bajić, V.: Cut-to-length machines. In: Bošnjak, S., Zrnić, N. (eds) Proceedings of the XIX International Conference on “Material Handling, Constructions and Logistics”, University of Belgrade, Faculty of Mechanical Engineering, Serbia, pp. 109–118 (2009)
Cacot, E.: Mechanization of the hardwood exploitation: evolutions and questions. Forêt Wallonne 102, 34–44 (2009)
Weber, J., Penn, J.: Creation and rendering of realistic trees. In: Proceedings of the 22nd Annual Conference on Computer Graphics and Interactive Techniques, pp. 119–128 (1995)
McKenzie, W.M.: Fundamental analysis of the wood-cutting process. PhD thesis, Department of Wood Technology, School of Natural Resources, The University of Michigan (1961)
Abdallah, R., Auchet, S., Méausoone, P.J.: Experimental study about the effects of disc chipper settings on the distribution of wood chip size. Biomass Bioenergy 35(2), 843–852, ISSN 0961-9534 (2011)
Hatton, B., Pot, G., Bouzgarrou, B.C., Gagnol, V., Gogu, G.: Experimental determination of delimbing forces and deformations in hardwood harvesting. Croatian J. Forest Eng. 36(1), (2015)
Dargnat, G., Devemy, C., Fauroux, J-C., Pellet, H-P., Hatton, B., Perriguey, N., David Goubet, D., Chebab, Z., Bouzgarrou, B.C., Gagnol, V., Gogu, G.: Determination and optimization of delimbing forces on hardwood harvesting heads. In: 5th Forest Engineering Conference, Gerardmer, France, 23rd–26th Sept (2014)
Dargnat, G., Devemy, C., Pellet, H-P., Fauroux, J.-C.: Curved delimbing blade, use of same, corresponding delimbing head and cutting kit. PCT patent WO 2015177432. Institut Français de Mécanique Avancée (IFMA)/Intégration & Solutions Industrielles (ISI), 30p (2015)
Goubet, D., Fauroux, J.-C., Gogu, G.: Gripping mechanisms in current wood harvesting machines. Frontiers Mech. Eng. 8(1), 42–61, Springer, ISSN: 2095-0233 (2013)
Klamecki, B.E.: Friction mechanisms in wood cutting. Wood Sci. Technol. 10, 209–214 (1976)
Hatton, B., Gagnol, V., Bouzgarrou, B.C., Gogu, G.: Modelling of the hardwood harvesting process: feeding model. 21ème Congrès Français de Mécanique (CFM), Bordeaux (2013)
Acknowledgments
This research work is part of ECOMEF project founded by Conseil Regional Auvergne and by the program Regional competitiveness and employment 2007–2013 (European Regional Development Fund—Auvergne region). These organisms are acknowledged for their financial support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Hatton, B., Bouzgarrou, B.C., Fauroux, JC., Gagnol, V., Gogu, G. (2017). An Approach for Modelling Harvester Head Mechanism in the Harvesting Process of Hardwood Stands. In: Corves, B., Lovasz, EC., Hüsing, M., Maniu, I., Gruescu, C. (eds) New Advances in Mechanisms, Mechanical Transmissions and Robotics. Mechanisms and Machine Science, vol 46. Springer, Cham. https://doi.org/10.1007/978-3-319-45450-4_14
Download citation
DOI: https://doi.org/10.1007/978-3-319-45450-4_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-45449-8
Online ISBN: 978-3-319-45450-4
eBook Packages: EngineeringEngineering (R0)