Abstract
Doubled haploidy is an important tool for plant breeders. It provides a rapid means of developing recombinant populations consisting of individuals that are homozygous and therefore genetically fixed. Homozygosity is also important in plant mutation breeding where many induced mutations are predicted to be recessive and mutant alleles need to be in a homozygous state before new traits are expressed. While production of doubled haploids has been described for many plant species, efficient means to validate that produced materials are indeed homozygous are needed. Polymorphism discovery methods utilizing enzymatic mismatch cleavage are ideally suited for validation of doubled haploid plants. We describe here a low-cost protocol that utilizes self-extracted single-strand-specific nucleases, standard PCR reactions and agarose gel electrophoresis that can be applied to most plant species.
You have full access to this open access chapter, Download chapter PDF
Similar content being viewed by others
Keywords
- Homozygosity
- Genetic fixation
- Single-strand-specific nuclease
- Polymorphism discovery
- TILLING
- Ecotilling
- Hordeum vulgare
- Eragrostis tef
1 Introduction
First reported in the early 1920s, methods for the production of haploid plants have now been described for more than 250 species (Blakeslee et al. 1922; Maluszynski et al. 2003). In many cases, haploid plants either spontaneously become diploid or this state can be induced by treatment with chemicals such as colchicine. Doubled haploidy remains a popular and powerful tool in plant sciences and breeding because once plants are doubled haploid (DH), they are homozygous, genetic variants are fixed and inbreeding plants are true breeding. A wide range of methods have been described for producing DH plants, and efficiencies can vary dramatically (Maluszynski et al. 2003; Forster et al. 2007; Geiger and Gordillo 2009; Ravi and Chan 2010). Doubled haploids are extremely valuable commercially as they can accelerate the breeding process; they can be developed directly into uniform and stable cultivars of inbreeding species and provide parental lines to be used in hybrid breeding. For successful and efficient research and breeding, it is therefore necessary to validate that materials are truly DH and homozygous before plants are selected for further evaluation and use. This holds particularly true in the context of the development of new methods of haploid formation, be it the implementation of a novel principle or just the adoption of a known method in another species.
Enzymatic mismatch cleavage for discovery and genotyping of single-nucleotide polymorphisms (SNPs) and small insertion/deletions (indels) is ideally suited to detect loss of heterozygosity in putative doubled haploid plants in comparison to the progenitor lines. Widely used in Targeting Induced Local Lesions IN Genomes (TILLING) reverse-genetic studies, the procedure begins with the selection of gene-specific primers for PCR amplification of ~1–1.5 kb regions. This is followed by denaturation and annealing that creates heteroduplexed DNA in samples where heterozygous variation exists. Samples are then treated with a self-prepared mixture containing single-strand-specific nucleases that cleave DNA at mismatched regions. The resulting products are electrophoresed, and the presence of cleaved DNA fragments of lower molecular weight than the original PCR product indicates the presence and approximate location of heterozygous polymorphisms (Till et al. 2006a, b). The process is made low cost by self-extraction of nuclease and the use of standard agarose gel electrophoresis as a gel readout platform (Till et al. 2015).
Enzymatic mismatch cleavage has also been widely used in Ecotilling studies for discovery of natural nucleotide variation in populations (Till 2014). This approach has been shown to be highly accurate with less than 5% false discovery and false-negative error rates, even in highly heterozygous polyploids (Till et al. 2006a, 2010).
The method can be easily adapted to evaluate homozygosity in putatively haploid or DH plants. As a proof of principle, Hofinger et al. (2013) developed this method for barley and compared it to another approach for validation of DH plants: simple sequence repeat (SSR) markers (Hofinger et al. 2013). In this work, the authors showed that 11/26 primer pairs were suitable for DH validation by enzymatic mismatch cleavage, while only 3/32 previously characterized SSR primer sets were suitable. Thus the enzymatic mismatch cleavage approach had an ~4.5× higher success rate. Furthermore, because enzymatic mismatch cleavage utilizes gene- or target-specific primers, the approach allows for accurate DH production error estimations per plant and per experiment taking into account genetic linkage. In addition, using gene-specific primers allows selection of specific alleles and for diversification of allele types in applications such as those involving F1 hybrids. The entire process can be completed in one day (Fig. 16.1). Enzymatic mismatch cleavage has been used in over 20 plant and animal species for TILLING and Ecotilling, and thus this adaptation for haploid/DH validation is expected to be broadly applicable (Kurowska et al. 2011; Till 2014). Indeed, in addition to barley, we show data for screening putative DH Eragrostis tef plants (Fig. 16.3 and Hofinger et al. 2013). While the methods described in this protocol are straightforward and low cost, a key component of successful application is proper experimental design. Example data and a discussion of experimental design are provided along with a detailed protocol suitable for many crop species.
2 Materials
2.1 PCR Amplification
-
1.
Taq DNA polymerase and Taq polymerase buffer (see Note 1)
-
2.
dNTP mix
-
3.
MgCl2 (25 mM stock), if not supplied in Taq polymerase buffer
-
4.
Forward and reverse primers (see Note 2)
-
5.
Laboratory grade water (distilled or deionized and autoclaved)
-
6.
Thermal cycler with heated lid and adjustable ramping
2.2 Enzymatic Mismatch Cleavage
-
1.
Magnesium sulphate (MgSO4)
-
2.
Triton X-100
-
3.
HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid).
-
4.
Bovine serum albumin (BSA)
-
5.
Potassium chloride (KCl)
-
6.
10× Cleavage buffer (prepare a stock solution of 5 ml 1 M MgSO4,100 μl 10 % Triton X-100, 5 ml 1 M HEPES (pH 7.4), 5 μl 20 mg/mL BSA, 2.5 ml 2 M KCl, 37.5 ml water
-
7.
Single-strand-specific nuclease (see Note 3)
-
8.
EDTA (ethylenediaminetetraacetic acid), 0.25 M
2.3 Agarose Gel Electrophoresis
-
1.
Standard agarose
-
2.
TBE (tris/borate/EDTA) buffer
-
3.
Ethidium bromide (10 mg/ml) (see Note 4)
-
4.
Horizontal gel electrophoresis system with power supply
-
5.
Gel imaging system
-
6.
Gel loading dye (30 % glycerol plus Orange G) (see Note 5)
-
7.
DNA molecular weight ladder (e.g. 1 kb ladder, Invitrogen 10787-018)
3 Methods
3.1 PCR Amplification
-
1.
Select samples for analysis based on guidelines for experimental design (see Note 6).
-
2.
Prepare a master mix according to manufacturer’s guidelines for the Taq polymerase used. For example, for 10 samples with TaKaRa Ex Taq: 109.5 μl water, 20 μl 10× Ex Taq buffer, 16 μl 2.5 mM dNTP mix, 2 μl forward primer (10 μM), 2 μl reverse primer (10 μM), 0.5 μl TaKaRa Ex Taq (5 U/μl).
-
3.
Add 5 μL of DNA to each PCR tube (see Note 7).
-
4.
Add 15 μl of PCR Master Mix to each PCR tube and mix by pipetting.
-
5.
Centrifuge tubes for 1 min at 5000 × g.
-
6.
Incubate samples in thermal cycler with following conditions (see Note 8):
Step 1: Initial denaturation, 95 °C, 2 min
Step 2: Denaturation, 94 °C, 20 s
Step 3: Primer annealing, 73 °C (−1 °C/cycle), 30 s
Step 4: Ramp, 0.5 °C per second to 72 °C
Step 5: Primer extension, 72 °C, 1 min
Step 6: Cycling, repeat steps 2–5 for 7 cycles (8 cycles in total)
Step 7: Denaturation, 94 °C, 20 s
Step 8: Primer annealing, 65 °C, 30 s
Step 9: Ramp, 0.5 °C per second to 72 °C
Step 10: Primer extension, 72 °C, 1 min
Step 11: Cycling, repeat steps 7–10 for 44 cycles (45 cycles in total)
Step 12: Final extension, 72 °C, 5 min
Step 13: Denaturation, 99 °C, 10 min
Step 14: Cooling, 72 °C, 20 s
Step 15: Cycling and touchdown, repeat step 14 for 69 cycles (−0.3 °C/cycle)
Step 16: Hold, 8 °C, forever
-
7.
Samples can be stored at −20 °C for months.
3.2 Enzymatic Mismatch
-
1.
Prepare an enzyme digestion master mix. For each sample add 4 μl 10× cleavage buffer, 7 μl single-strand-specific nuclease and 9 μl water (see Note 3).
-
2.
Centrifuge PCR products for 1 min at 5000 × g.
-
3.
Add 20 μl of enzyme digestion master mix to PCR reactions (see Note 3).
-
4.
Incubate reactions in a thermal cycler at 45 °C for 15 min (no heated lid) and then hold at 8 °C.
-
5.
Add 5 μl of 0.25 M EDTA to each tube to stop the reaction.
3.3 Agarose Gel Electrophoresis and Data Analysis
-
1.
Prepare a 1.5 % agarose gel in 0.5x TBE buffer. Heat mixture in microwave until all agarose is dissolved. Take care to avoid boiling agarose.
-
2.
Cool agarose to approximately 55 °C (at this temperature you can hold the flask in your hand comfortably for 5 s).
-
3.
Add ethidium bromide to the warm gel solution to obtain a final concentration of 0.5 μg/mL in the gel. Mix by swirling.
-
4.
Pour gel solution into gel apparatus and insert comb according to the instructions of the manufacturer.
-
5.
Add 2 μl 6× loading dye to 10 μl PCR product.
-
6.
Run gel at 100 V for 1 h or until suitable separation of bands is achieved (see Note 9).
-
7.
Photograph the gel.
- 8.
4 Notes
-
1.
Most Taq polymerases should be suitable for this method. Compare your favourite Taq with the least expensive you can purchase. If the two produce similar results, use the cheaper version. Some Taq polymerases, like TaKaRa Ex Taq, come supplied with dNTPs and buffer containing MgCl2.
-
2.
Primer pairs should be selected to different genomic regions that are not genetically linked. The total number of primer pairs needed depends on the percentage of primer pairs where heterozygosity is observed. Primers are typically designed with the program Primer3 (Rozen and Skaletsky 2000) with a melting temperature of 70 °C (see Note 8).
-
3.
The optimal amount of nuclease varies depending on the activity of the batch being used. Analysis of activity can be performed by screening PCR amplicons with heterozygous SNPs and titrating the amount of enzyme to produce clear bands on the gel. See Chap. 15 for a protocol on enzyme preparation and activity optimization. When making master mixes, it is best to prepare more volume than is needed (e.g. for one additional sample) to compensate for minor pipetting errors. Volumes of reactions can be reduced from 40 to 20 μl in some cases.
-
4.
Caution: Ethidium bromide is hazardous. Wear gloves and avoid contamination. Consult material safety data sheet (MSDS) for proper handling and disposal procedures. Alternative DNA stains can be used, e.g. SYBR Safe DNA gel stain, but detection may vary with different dyes.
-
5.
Avoid loading dyes containing bromophenol blue or other dyes that migrate in a molecular weight range where you expect to observe DNA fragments. The presence of loading dyes can reduce the intensity of bands.
-
6.
It is important to note that methods described here test only for homozygosity versus heterozygosity. Enzymatic mismatch cleavage does not distinguish between haploid and DH plants. An alternative method such as flow cytometry is required for this. The optimum experimental design includes DNA from the progenitor plant along with DNA from each putative DH plant produced from the progenitor. The only useful primer pairs will be those where heterozygosity is discovered in the progenitor plant. For example, if making doubled haploids from F1 hybrid material, DNA from the F1 hybrid is ideally evaluated along with DNA from the parents that were used to make the F1. If the F1 harbours heterozygous SNPs at a particular locus, and the putative DH plants do not, this is evidence that the plant is DH (see Note 10 for more on data analysis and interpretation). In this example, if F1 material is not available, a synthetic F1 sample can be prepared by mixing an equal concentration of DNA from each parent in a 1:1 ratio prior to PCR amplification. Screening the parental material alone is informative to learn if parents are heterozygous in any interrogated regions. It is not ideal to screen only putative DH material as it is difficult to estimate the probability that plants are truly DH rather than being homozygous because progenitor material was homozygous at that locus. In some cases, however, only putative DH material is available. In this circumstance it is advised to mix two to four putative DH samples together prior to PCR. If heterozygosity is observed in the mixture but not in individual samples, this suggests that the progenitor material was heterozygous. The set of primers used in this experiment would then be considered suitable (see Note 10).
-
7.
The optimal amount of genomic DNA to be used should be determined empirically. Typically, a PCR amplicon yield of 10 ng/μl is sufficient. The amount of genomic DNA needed to produce this amount can be roughly estimated by size of the genome (Till et al. 2006b). The yield of PCR product should be sufficiently high to produce cleavage fragments visible by agarose gel electrophoresis (see Figs. 16.2 and 16.3).
-
8.
PCR conditions may need to be optimized. For example, primers with a melting temperature (Tm) of 70 °C were used to develop this protocol. Higher Tm primers increase specificity of amplification, but may not be necessary for all species. If lower Tm primers are used, the annealing temperature must be adjusted accordingly.
-
9.
Optimal run time may vary. The Orange G DNA dye migrates at approximately 50 base pairs. A migration distance of 6–8 cm of Orange G from the comb typically provides suitable separation of fragments.
-
10.
When analysing data, fragments observed of lower molecular weight than the full-length PCR product are typically the result of cleavage of heteroduplexed DNA at the site of a mismatch due to a nucleotide polymorphism. Truly doubled haploid plants are homozygous and therefore should not show cleavage products. However, cleavage fragments can also be observed due to a homopolymeric stretch of adenosine residues (Till et al. 2004). Evaluation of the parental material is therefore advised. Mixtures of parental material with putative DH plants allow assignment of alleles to a specific parent (see Figs. 16.2 and 16.3b). An estimation of the number of suitable primers can be made by calculating the probability that the data results by chance from self-fertilization. For example, the probability that the offspring of a self-fertilized heterozygous F1 is homozygous for a specific locus is 0.5 (assume a Mendelian 1:2:1 ratio). The probability that two genetically unlinked loci are homozygous is 0.52 = 0.25. By screening seven primer pairs from unlinked loci that show heterozygosity in the F1, one can achieve 99 % confidence.
References
Blakeslee AF, Belling J, Farnham ME, Bergner AD (1922) A Haploid Mutant in the Jimson Weed, “Datura stramonium”. Science 55(1433):646–647
Forster BP, Heberle-Bors E, Kasha KJ, Touraev A (2007) The resurgence of haploids in higher plants. Trends Plant Sci 12(8):368–375
Geiger HH, Gordillo GA (2009) Doubled haploids in hybrid maize breeding. Maydica 54:485–499
Hofinger BJ, Huynh OA, Jankowicz-Cieslak J, Muller A, Otto I, Kumlehn J, Till BJ (2013) Validation of doubled haploid plants by enzymatic mismatch cleavage. Plant Methods 9(1):43
Kurowska M, Daszkowska-Golec A, Gruszka D, Marzec M, Szurman M, Szarejko I, Maluszynski M (2011) TILLING—a shortcut in functional genomics. J Appl Genet 52(4):371–390
Maluszynski M, Kasha KJ, Forster BP, Szarejko I (2003) Doubled haploid production in crop plants. A manual. Dordrecht/Kluwer Academic, Boston/London
Ravi M, Chan SW (2010) Haploid plants produced by centromere-mediated genome elimination. Nature 464(7288):615–618
Rozen S, Skaletsky H (2000) Primer3 on the WWW for general users and for biologist programmers. Methods Mol Biol 132:365–386
Till BJ (2014) Mining genetic resources via Ecotilling. In: Tuberosa R, Graner A, Frison E (eds) Genomics of plant genetic resources. Springer, Dordrecht, pp. 349–365
Till BJ, Burtner C, Comai L, Henikoff S (2004) Mismatch cleavage by single-strand specific nucleases. Nucleic Acids Res 32(8):2632–2641
Till BJ, Zerr T, Bowers E, Greene EA, Comai L, Henikoff S (2006a) High-throughput discovery of rare human nucleotide polymorphisms by Ecotilling. Nucleic Acids Res 34(13):e99
Till BJ, Zerr T, Comai L, Henikoff S (2006b) A protocol for TILLING and Ecotilling in plants and animals. Nature Protocols 1(5):2465–2477
Till BJ, Jankowicz-Cieslak J, Sagi L, Huynh OA, Utsushi H, Swennen R, Terauchi R, Mba C (2010) Discovery of nucleotide polymorphisms in the Musa gene pool by Ecotilling. Theor Appl Genet 121(7):1381–1389
Till BJ, Jankowicz-Cieslak J, Huynh OA, Beshir M, Laport RG, Hofinger BJ (2015) Low-cost methods for molecular characterization of mutant plants. Springer, Cham
Acknowledgements
Funding for this work was provided by the Food and Agriculture Organization of the United Nations and the International Atomic Energy Agency through their Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture. This work is part of IAEA Coordinated Research Project D24012.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Open Access This chapter is distributed under the terms of the Creative Commons Attribution-Noncommercial 2.5 License (http://creativecommons.org/licenses/by-nc/2.5/) which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
The images or other third party material in this chapter are included in the work’s Creative Commons license, unless indicated otherwise in the credit line; if such material is not included in the work’s Creative Commons license and the respective action is not permitted by statutory regulation, users will need to obtain permission from the license holder to duplicate, adapt or reproduce the material.
Copyright information
© 2017 International Atomic Energy Agency
About this chapter
Cite this chapter
Till, B.J. et al. (2017). A Protocol for Validation of Doubled Haploid Plants by Enzymatic Mismatch Cleavage. In: Jankowicz-Cieslak, J., Tai, T., Kumlehn, J., Till, B. (eds) Biotechnologies for Plant Mutation Breeding. Springer, Cham. https://doi.org/10.1007/978-3-319-45021-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-45021-6_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-45019-3
Online ISBN: 978-3-319-45021-6
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)