Abstract
Following the procedures developed in Chap. 2, the Fixed-Flux Model (FFM) is applied here to the stability of vertical bubbly flow. The virtual mass force and the interfacial pressure are introduced to obtain a conditionally well-posed TFM. Then a collision-induced pressure is considered and we adopt the interfacial collision force derived from the Enskog kinetic equation by Alajbegovic et al. (Chemical Engineering Communications 174: 85–133, 1999). When this force is incorporated into the FFM it removes the Kelvin–Helmholtz-type instability completely, resulting in an unconditionally well-posed model. These mechanisms are also associated with the acoustic and material wave speeds so they have an effect on the fidelity of the model. Therefore, while the pursuit of a complete TFM may be impractical, it is at least possible to obtain a well-posed model with the correct wave speeds. Finally, the nonlinear behavior of the well-posed FFM for bubbly flow, first analyzed by Park et al. (International Journal of Multiphase Flow 24: 1205–1244, 1998), is investigated with numerical simulations for stable flow and for kinematically unstable waves for conditions similar to a Guinness draught beer.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Agrawal, K., Loezos, P. N., Syamlal, M., & Sundaresan, S. (2001). The role of meso-scale structures in rapid gas–solid flows. Journal of Fluid Mechanics, 445, 151–185.
Alajbegovic, A., Drew, D. A., & Lahey, R. T., Jr. (1999). An analysis of phase distribution and turbulence in dispersed particle/liquid flows. Chemical Engineering Communications, 174, 85–133.
Alexander, C. A., & Zare, R. N. (2004). Do bubbles in Guinness go down? Retrieved from http://www.stanford.edu/group/Zarelab/guinness/
Batchelor, G. K. (1988). A new theory of the instability of a uniform fluidized-bed. Journal of Fluid Mechanics, 193, 75–110.
Benilov, E. S., Cummins, C. P. and Lee, W. T. (2013). Why do bubbles in Guinness sink? American Journal of Physics, 81(2), 88. http://arxiv.org/pdf/1205.5233v1.pdf
Bestion, D. (1990). The physical closure laws in the CATHARE code. Nuclear Engineering and Design, 124, 229–245.
Carnahan, N. F., & Starling, K. E. (1969). Equations of state for non-attracting rigid spheres. Journal of Chemical Physics, 51, 635–636.
Drew, D. A., & Lahey, R. T., Jr. (1987). The virtual mass and lift force on a sphere in rotating and straining inviscid fluid. International Journal of Multiphase Flow, 13(1), 113–121.
Drew, D. A., & Passman, S. L. (1999). Theory of multicomponent fluids. Springer, Berlin: Applied Mathematical Sciences.
Fullmer, W. D., & Hrenya, C. M. (2016). Quantitative assessment of fine-grid kinetic-theory-based predictions of mean-slip in unbounded fluidization. AIChE Journal, 62(1), 11–17.
Fullmer, W. D., & Hrenya, C. M. (2017). The clustering instability in rapid granular and gas-solid flows. Annual Review of Fluid Mechanics, 49, 485–510.
Garzó, V., & Santos, A. (2003). Kinetic theory of gases in shear flows. Dordrecht, the Netherlands: Springer.
Haley, T. C., Drew, D. A., & Lahey, R. T. (1991). An analysis of the eigenvalues of bubbly two-phase flows. Chemical Engineering Communications, 106, 93–117.
Henry, R. E., Grolmes, M. A., & Fauske, H. K. (1971) Pressure-pulse propagation in two-phase one- and two-component mixtures (Technical Report ANL-7792). Argonne National Laboratory.
Ishii, M., & Chawla, T. C. (1979). Local drag laws in dispersed two-phase flow. Argonne: ANL.
Ishii, M., & Hibiki, T. (2006). Thermo-fluid dynamics of two-phase flow. Berlin: Springer.
Kytomaa, H. K. & Brennen, C. E. (1991). Small Amplitude Kinematic Wave Propagation in Two-component Media, International Journal of Multiphase Flow, 17(1), 13–26.
Lopez de Bertodano, M. A., Fullmer W., Vaidheeswaran, A. (2013). One-Dimensional Two-Equation Two-Fluid Model Stability. Multiphase Science and Technology, 25(2), 133–167.
Ma, D., & Ahmadi, G. (1988). A kinetic-model for rapid granular flows of nearly elastic particles including interstitial fluid effects. Powder Technology, 56(3), 191–207.
Park, S. W., Drew, D. A., & Lahey, R. T., Jr. (1998). The analysis of void wave propagation in adiabatic monodispersed bubbly two-phase flows using an ensemble-averaged two fluid model. International Journal of Multiphase Flow, 24, 1205–1244.
Pauchon, C., & Banerjee, S. (1986). Interphase momentum interaction effects in the averaged multifield model. International Journal of Multiphase Flow, 12, 559–573.
Robinson, M., Fowler, A. C., Alexander, A. J., & O’Brien, S. B. (2008). Waves in Guinness. Physics of Fluids, 20, 067101.
Stuhmiller, J. H. (1977). The influence of interfacial pressure forces on the character of two-phase flow model equations. International Journal of Multiphase Flow, 3, 551–560.
Wallis, G. B. (1969). One-dimensional two-phase flow. New York: McGraw-Hill.
Watanabe, T., Hirano, M., Tanabe, F., & Kamo, H. (1990). The effect of the virtual mass force term on the numerical stability and efficiency of system calculations. Nuclear Engineering and Design, 120, 181. doi:10.1016/0029-5493(90)90371-4.
Watanabe, T., & Kukita, Y. (1992). The effect of the virtual mass term on the stability of the two-fluid model against perturbations. Nuclear Engineering and Design, 135, 327. doi:10.1016/0029-5493(92)90200-F.
Whitham, G. B. (1974). Linear and nonlinear waves. New York: Wiley.
Zuber, N. (1964). On the dispersed two-phase flow in the laminar flow regime. Chemical Engineering Science, 19, 897. doi:10.1016/0009-2509(64)85067-3.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
de Bertodano, M.L., Fullmer, W., Clausse, A., Ransom, V.H. (2017). Fixed-Flux Model. In: Two-Fluid Model Stability, Simulation and Chaos. Springer, Cham. https://doi.org/10.1007/978-3-319-44968-5_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-44968-5_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44967-8
Online ISBN: 978-3-319-44968-5
eBook Packages: EngineeringEngineering (R0)