Abstract
Solutions to elasticity theory problem for elastic plane with a semi-infinite notch and cracks propagating from its tip find a wide application in fracture mechanics. Such solutions can be used as asymptotic approximations for respective finite regions with notches and small cracks. This class of solutions is useful in studying crack nucleation and propagation near stress concentrators under fatigue loading as well as developing fracture criteria for cracked bodies. This chapter is devoted to determining stress intensity factors for the straight crack growing from the semi-infinite notch tip in elastic plane. The relation between stress intensity factors in the sharp tip of V-notch and the crack tip had been derived.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Agalaryan, O.B.: On plane problem compound wedge with radial crack. Proc. Nat. Acad. Sci. Armenia. Mech. 60(3), 7–14 (2007)
Aleksandrov, V.M., Smetanin, B.I., Sobol, B.V.: Thin Stress Concentrators in Elastic Bodies. Fizmatlit, Moscow (1993)
Bantsuri, R.D.: Solution of the first basic problem of elasticity theory for a wedge having a finite cut. Proc. Acad. Sci. USSR 167, 1256–1259 (1966)
Bueckner, H.: Novel principle for the computation of stress intensity factors. ZAMM J. Appl. Math. Mech. 50(9), 529–546 (1970)
Chen, Y.Z., Lin, W.Z.: Stress intensification at crack tips near parabolic notch. Theor. Appl. Fract. Mech. 16(3), 243–254 (1991)
Doran, H.E.: The wedge with a symmetric crack at the vertex in plane elastostatics. J. Inst. Math. Appl. 5, 363–372 (1969)
Dwight, H.B.: Table of Integrals and Other Mathematical Data. Macmillan, New York (1961)
Erdogan, F., Civelek, M.B.: Stress intensity factors in a cracked infinite elastic wedge loaded by a rigid punch. Int. J. Eng. Sci. 17(8), 973–989 (1979)
Erdogan, F., Gupta, G.D.: Contact and crack problems for an elastic wedge. Int. J. Eng. Sci. 14, 155–164 (1976)
Eshelby, J.D.: Prospects of fracture mechanics. In: Sih, G.C., van Elst, H.C., Broek, D. (eds.) The Calculation of Energy Release Rates, pp. 69–84. Noordhoff International Publishing, Leyden (1974)
Fett, T.: Direct determination of weight functions from reference loading cases and geometrical conditions. Eng. Fract. Mech. 42(3), 435–444 (1992)
Fett, T.: Weight function for cracks ahead of sharp notches. Int. J. Fract. 74(1), 11–16 (1995)
Fett, T.: Weight functions for cracks at sharp notches and notch intensity factors. Int. J. Fract. 77, R27–R33 (1996)
Fett, T., Munz, D.: Stress Intensity Factors and Weight Functions. Advances in Fracture Mechanics. Computational Mechanics Publications Inc., Southampton (1997)
Freund, L.B.: Stress intensity factor calculations based on a conservation integral. Int. J. Solids Struct. 14(3), 241–250 (1978)
Gallagher, D.: A crack at the apex of a V-shaped notch. Int. J. Fract. 69(4), 81–87 (1995)
Grenestedt, J.L., Hallstrom, S.: Crack initiation from homogeneous and bimaterial corners. J. Appl. Mech. 64(4), 811–818 (1997)
Iida, J., Hasebe, N., Nakamura, T.: Approximate expressions for SIF of crack initiating from notch for thin plate bending and plane problems. Eng. Fract. Mech. 36(5), 819–825 (1990)
Jones, R., Peng, D.: A simple method for computing the stress intensity factors for cracks at notches. Eng. Fail. Anal. 9(6), 683–702 (2002)
Kazberuk, A.: Stress intensity factors for cracks at the vertex of a rounded V-notch. Mater. Sci. 45(5), 676–687 (2009)
Kazberuk, A.: Dwuwymiarowe zagadnienia mechaniki pȩkania ciał z karbami (Two-dimensional problems of fracture mechanics of bodies with notches). Bialystok University of Technology, Bialystok (2010)
Keer, L.M., Mendelsohn, D.A., Achenbach, J.D.: Crack at the apex of a loaded notch. Int. J. Solids Struct. 13(7), 615–623 (1977)
Khrapkov, A.A.: Certain cases of the elastic equilibrium of an infinite wedge with a nonsymmetric notch at the vertex, subjected to concentrated forces. J. Appl. Math. Mech. 35(4), 625–637 (1971)
Khrapkov, A.A.: Closed form solutions of problems on the elastic equilibrium of an infinite wedge with nonsymmetric notch at the apex. J. Appl. Math. Mech. 35(6), 1009–1016 (1971)
Khrapkov, A.A.: Infinite triangular wedge with a cut on the bisector under the action of concentrated forces applied to sides of the cut. Mech. Solids 7(5), 88–97 (1972)
Kipnis, L.: A crack along the continuation of the face of a wedge enveloping a half-space. J. Appl. Math. Mech. 43(5), 981–986 (1979)
Kipnis, L.A.: Elastic equilibrium of a wedge with a crack. J. Appl. Math. Mech. 43(1), 164–170 (1979)
Kipnis, L.A.: Homogeneous problem for a wedge with a symmetric crack at the apex. J. Appl. Math. Mech. 45(2), 293–296 (1981)
Kujawski, D.: Estimations of stress intensity factors for small cracks at notches. Fatig. Fract. Eng. Mater. Struct. 14(10), 953–965 (1991)
Muki, R., Westmann, R.A.: Crack emanating from an open notch. J. Elast. 4(3), 173–186 (1974)
Nekislykh, E.M., Ostrik, V.I.: Tension and compression by concentrated forces of elastic wedge with an edge crack. Mashynoznavstvo (Engineering) 10, 3–8 (2009)
Nekislykh, E.M., Ostrik, V.I.: The problem of the elastic equilibrium of the wedge with cracks on the axis of symmetry. Mech. Solids 45(5), 743–756 (2010)
Noble, B.: Methods Based on the Wiener–Hopf Technique for the Solution of Partial Differential Equations. Pergamon Press, London (1958)
Ouchterlony, F.: Symmetric cracking of a wedge by concentrated loads. Int. J. Eng. Sci. 15(2), 109–116 (1977)
Ouchterlony, F.: Some stress intensity factors for self-similar cracks, derived from path-independent integrals. J. Elast. 8(3), 259–271 (1978)
Panasyuk, V.V., Savruk, M.P., Datsyshin, A.P.: Raspredeleniye napryazhenii okolo treshchin v plastinakh i obolochkakh (Stress distribution around cracks in plates and shells). Naukova dumka, Kyiv (1976)
Petroski, H., Achenbach, J.: Computation of the weight function from a stress intensity factor. Eng. Fract. Mech. 10(2), 257–266 (1978)
Philipps, A.G., Karuppanan, S., Banerjee, N., Hills, D.A.: Crack tip stress intensity factors for a crack emanating from a semi-infinite notch with application to the avoidance of fatigue in complete contacts. Proc. IME C. J. Mech. Eng. Sci. 223(4), 789–794 (2009)
Philipps, A.G., Karuppanan, S., Churchman, C.M., Hills, D.A.: Crack tip stress intensity factors for a crack emanating from a sharp notch. Eng. Fract. Mech. 75(18), 5134–5139 (2008)
Savruk, M.P.: Dvumernyye zadachi uprugosti dla tel s treshchinami (Two-dimensional problems of elasticity for bodies with cracks). Naukova dumka, Kyiv (1981)
Savruk, M.P.: Koeficienty intensivnosti napryazhenii v telakh s treshchinami (Stress intensity factors in bodies with cracks). Naukova dumka, Kyiv (1988)
Savruk, M.P., Osiv, P.M., Prokopchuk, I.V.: Chislennyy analiz v ploskikh zadachakh teorii treshchin (Numerical analysis in plane problems of theory of cracks). Naukova dumka, Kyiv (1989)
Savruk, M.P., Rytsar, R.B.: Stress intensity factors for a semiinfinite crack with branches. Mater. Sci. 33(1), 35–41 (1997)
Savruk, M.P., Rytsar, R.B.: Closed approximate solution of a plane problem of elasticity for a wedge with symmetric crack. In: Mekhanika i fizyka ruinuvannya budivelnykh materialiv ta konstruktsii (Mechanics and physics of fracture of building materials and structures), vol. 2, pp. 125–128. Lviv (1999)
Shen, G., Glinka, G.: Determination of weight functions from reference stress intensity factors. Theor. Appl. Fract. Mech. 15(3), 237–245 (1991)
Smetanin, B.P.: On a mixed problem of elasticity theory for a wedge. J. Appl. Math. Mech. 32(4), 732–739 (1968)
Smetanin, B.P.: Some of the problem of cracks in an elastic wedge and a layer. Mech. Solids 3(2), 115–122 (1968)
Stone, S.F., Westmann, R.A.: Stress intensity factors for cracked wedges. Int. J. Solids Struct. 17(3), 345–358 (1981)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Savruk, M.P., Kazberuk, A. (2017). Elastic Plane with Semi-infinite Notch and Cracks. In: Stress Concentration at Notches. Springer, Cham. https://doi.org/10.1007/978-3-319-44555-7_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-44555-7_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44554-0
Online ISBN: 978-3-319-44555-7
eBook Packages: EngineeringEngineering (R0)