Functionality in Insulating Oxide Thin Films: Work Function Control and Polar Surface

Chapter

Abstract

The role of insulating layer is critical in electronic devices and hence preparing a reliable insulating substrate and insulating thin films is a starting point to fabricate any types of devices: Electron distribution engineering is entirely thanks to “insulating” character of insulators. In this chapter, we show that various properties other than the insulating character can be tuned in insulating oxide thin films, giving a significant controllability in designing surface and interface properties. In the first part of this chapter we show that the work function of oxide heterostructures is largely modulated using various aspects of insulating thin films. One of the properties characteristic of insulating films is “polarity,” which has increasingly been attracting attention. In the last part of this chapter we address growth and characterization of MgO(111) film, which is a representative polar oxide system.

Keywords

Work function Polar surface Polar oxide films Thin film growth Metal–insulator interface 

References

  1. 1.
    H.J. Freund, G. Pacchioni, Oxide ultra-thin films on metals: new materials for the design of supported metal catalysts. Chem. Soc. Rev. 37, 2224–2242 (2008)CrossRefGoogle Scholar
  2. 2.
    O.W. Richardson, On the negative radiation from hot platinum. Proceedings of the Cambridge Philosophical Society 11, 286–295 (1902)Google Scholar
  3. 3.
    S.M. Sze, Physics of semiconductor devices (Wiley, New York, 1981)Google Scholar
  4. 4.
    N.D. Lang, W. Kohn, Theory of metal surfaces: charge density and surface energy. Phys. Rev. B 1, 4555 (1970)CrossRefGoogle Scholar
  5. 5.
    J. Kolaczkiewicz, E. Bauer, The dipole moments of noble and transition metal atoms adsorbed on W(110) and W(211) surfaces. Surf. Sci. 160, 1–11 (1985)CrossRefGoogle Scholar
  6. 6.
    M. Bieletzki, T. Hynninen, T.M. Soini, M. Pivetta, C.R. Henry, A.S. Foster, F. Esch, C. Barth, U. Heiz, Topography and work function measurements of thin MgO(001) films on Ag(001) by nc-AFM and KPFM. Phys. Chem. Chem. Phys. 12, 3203–3209 (2010)CrossRefGoogle Scholar
  7. 7.
    G. Butti, M.I. Trioni, H. Ishida, Electronic properties calculation of MgO thin films adsorbed on semi-infinite Ag(001). Phys. Rev. B 70, 195425 (2004)CrossRefGoogle Scholar
  8. 8.
    S.B. Cho, K.H. Yun, D.S. Yoo, K. Ahn, Y.C. Chung, Work function tuning of an ultrathin MgO film on an Ag substrate by generating oxygen impurities at the interface. Thin Solid Films 544, 541 (2013)CrossRefGoogle Scholar
  9. 9.
    L. Giordano, F. Cinquini, G. Pacchioni, Tuning the surface metal work function by deposition of ultrathin oxide films: Density functional calculations. Phys. Rev. B 73, 045414 (2006)CrossRefGoogle Scholar
  10. 10.
    J. Goniakowski, C. Noguera, Electronic states and schottky barrier height at metal/MgO(100) interfaces. Interface Sci. 12, 93–103 (2004)CrossRefGoogle Scholar
  11. 11.
    T. König, G.H. Simon, H.-P. Rust, M. Heyde, Work function measurements of thin oxide films on metals—MgO on Ag(001). J. Phys. Chem. C 113, 11301–11305 (2009)CrossRefGoogle Scholar
  12. 12.
    S. Ling, M.B. Watkins, A.L. Shluger, Effects of atomic scale roughness at metal/insulator interfaces on metal work function. Phys. Chem. Chem. Phys. 15, 19615 (2013)CrossRefGoogle Scholar
  13. 13.
    S. Prada, L. Giordano, G. Pacchioni, Li, Al, and Ni substitutional doping in MgO ultrathin films on metals: work function tuning via charge compensation. J. Phys. Chem. C 116, 5781 (2012)CrossRefGoogle Scholar
  14. 14.
    S. Prada, U. Martinez, G. Pacchioni, Work function changes induced by deposition of ultrathin dielectric films on metals: a theoretical analysis. Phys. Rev. B 78, 235423 (2008)CrossRefGoogle Scholar
  15. 15.
    T. Susaki, A. Makishima, H. Hosono, Tunable work function in MgO/Nb:SrTiO3 surfaces studied by Kelvin probe technique. Phys. Rev. B 83, 115435 (2011)CrossRefGoogle Scholar
  16. 16.
    T. Susaki, A. Makishima, H. Hosono, Work function engineering via LaAlO3/SrTiO3 polar interfaces. Phys. Rev. B 84, 115456 (2011)CrossRefGoogle Scholar
  17. 17.
    T. Susaki, H. Hosono, Control of surface work function by depositing insulating oxide capping layers. Jpn. J. Appl. Phys. 52, 110125 (2013)CrossRefGoogle Scholar
  18. 18.
    M.E. Vaida, T. Gleitsmann, R. Tchitnga, T.M. Bernhardt, Femtosecond-laser photoemission spectroscopy of Mo(100) covered by ultrathin MgO(100) films of variable thickness. J. Phys. Chem. C 113, 10264–10268 (2009)CrossRefGoogle Scholar
  19. 19.
    D.C. Tsui, H.L. Stormer, A.C. Gossard, Two-dimensional magnetotransport in the extreme quantum limit. Phys. Rev. Lett. 48, 1559 (1982)CrossRefGoogle Scholar
  20. 20.
    O. Ambacher, J. Smart, J.R. Shealy, N.G. Weimann, K. Chu, M. Murphy, W.J. Schaff, L.F. Eastman, R. Dimitrov, L. Wittmer, M. Stutzmann, W. Rieger, J. Hilsenbeck, Two-dimensional electron gases induced by spontaneous and piezoelectric polarization charges in N- and Ga-face AlGaN/GaN heterostructures. J. Appl. Phys. 85, 3222–3233 (1999)CrossRefGoogle Scholar
  21. 21.
    A. Tsukazaki, A. Ohtomo, T. Kita, Y. Ohno, H. Ohno, M. Kawasaki, Quantum hall effect in polar oxide heterostructures. Science 315(5817), 1388–1391 (2007)CrossRefGoogle Scholar
  22. 22.
    A. Ohtomo, H.Y. Hwang, A high-mobility electron gas at the LaAlO3/SrTiO3 heterointerface. Nature 427, 423–426 (2004)CrossRefGoogle Scholar
  23. 23.
    E.W. Müller, Field Emission Microscopy. Modern Research Techniques in Physical Metallurgy (A Seminar, 34th. National Metal Congress & Exposition, Cleveland, Oct. 18–24, 1952, Sponsored by the American metals Society), pp. 33–50Google Scholar
  24. 24.
    L.W. Swanson, L.C. Crouser, Total-energy distribution of field-emitted electrons and single-plane work functions for Tungsten. Phys. Rev. 163, 622 (1967)CrossRefGoogle Scholar
  25. 25.
    H. Nishiyama, T. Ohshima, H. Shinada, Tungsten Schottky emitters with reservoirs of metal oxide or nitride. Appl. Surf. Sci. 146, 382–386 (1999)CrossRefGoogle Scholar
  26. 26.
    Y. Saito, K. Yada, K. Minami, H. Nakane, H. Adachi, Experimental relationship between work function and dipole moment on Er O/W (100) and Lu O/W (100) emitter surfaces. J. Vac. Sci. Technol. B 22, 2743 (2004)CrossRefGoogle Scholar
  27. 27.
    L. Kelvin, Contact electricity of metals. Philosophical Mag. Ser. 5(46), 82–120 (1898)CrossRefGoogle Scholar
  28. 28.
    H. Ishii, N. Hayashi, E. Ito, Y. Washizu, K. Sugi, Y. Kimura, M. Niwano, Y. Ouchi, K. Seki, Kelvin probe study of band bending at organic semiconductor/metal interfaces: examination of Fermi level alignment. Phys. Status Solidi A 201, 1075–1094 (2004)CrossRefGoogle Scholar
  29. 29.
    G. Pacchioni, H. Freund, Electron transfer at oxide surfaces. The MgO paradigm: from defects to ultrathin films. Chem. Rev. 113, 4035–4072 (2013)CrossRefGoogle Scholar
  30. 30.
    S. Schintke, S. Messerli, M. Pivetta, F. Patthey, L. Libioulle, M. Stengel, A.D. Vita, W.D. Schneider, Insulator at the ultrathin limit: MgO on Ag(001). Phys. Rev. Lett. 87, 276801 (2001)CrossRefGoogle Scholar
  31. 31.
    D.M. Roessler, W.C. Walker, Electronic spectrum and ultraviolet optical properties of crystalline MgO. Phys. Rev. 159, 733 (1967)CrossRefGoogle Scholar
  32. 32.
    M.M. Abraham, Y. Chen, W.P. Unruh, Formation and stability of V− and VAl centers in MgO. Phys. Rev. B 9, 1842 (1974)CrossRefGoogle Scholar
  33. 33.
    Y. Chen, J.L. Kolopus, W.A. Sibley, Luminescence of the F+ center in MgO. Phys. Rev. 186, 865 (1969)CrossRefGoogle Scholar
  34. 34.
    A.M. Ferrari, G. Pacchioni, Electronic structure of F and V centers on the MgO surface. J. Phys. Chem. 99, 17010 (1995)CrossRefGoogle Scholar
  35. 35.
    A. Gibson, R. Haydock, J.P. LaFemina, Stability of vacancy defects in MgO: The role of charge neutrality. Phys. Rev. B 50, 2582 (1994)CrossRefGoogle Scholar
  36. 36.
    L.E. Halliburton, D.L. Cowan, L.V. Holroyd, Structure of the F+ center in magnesium oxide. Phys. Rev. B 12, 3408 (1975)CrossRefGoogle Scholar
  37. 37.
    B. Henderson, D.H. Bowen, Radiation damage in magnesium oxide. I. Dose dependence of reactor damage. J. Phys. C 4, 1487 (1971)CrossRefGoogle Scholar
  38. 38.
    V.E. Henrich, P.A. Cox, The Surface Science Of Metal Oxides (Cambridge University Press, Cambridge, 1994)Google Scholar
  39. 39.
    L.A. Kappers, R.L. Kroes, E.B. Hensley, F+ and F′ centers in magnesium oxide. Phys. Rev. B 1, 4151 (1970)CrossRefGoogle Scholar
  40. 40.
    M.J. Norgett, A.M. Stoneham, A.P. Pathak, Electronic structure of the V- centre in MgO. J. Phys. C 10, 555 (1977)CrossRefGoogle Scholar
  41. 41.
    M. Kawasaki, K. Takahashi, T. Maeda, R. Tsuchiya, M. Shinohara, O. Ishiyama, T. Yonezawa, M. Yoshimoto, H. Koinuma, Atomic control of the SrTiO3 crystal surface. Science 266, 1540–1542 (1994)CrossRefGoogle Scholar
  42. 42.
    Y.W. Chung, W.B. Weissbard, Surface spectroscopy studies of the SrTiO3 (100) surface and the platinum-SrTiO3(100) interface. Phys. Rev. B 20, 3456 (1979)CrossRefGoogle Scholar
  43. 43.
    L.F. Zagonel, M. Baeurer, A. Bailly, O. Renault, M.J. Hoffmann, S.J. Shih, N. Barrett, Orientation-dependent work function of in situ annealed strontium titanate. J. Phys. Condens. Matter 21, 314013 (2009)CrossRefGoogle Scholar
  44. 44.
    N.D. Lang, The density-functional formalism and the electronic structure of metal surfaces. Solid State Phys. 28, 225–300 (1973)Google Scholar
  45. 45.
    T. Susaki, S. Kumada, T. Katase, K. Matsuzaki, M. Miyakawa, H. Hosono, Fabrication of flat MgO(111) films on Al2O3(0001) substrates by pulsed laser deposition. Appl. Phys. Express 2, 091403 (2009)CrossRefGoogle Scholar
  46. 46.
    L. Giordano, U. Martinez, G. Pacchioni, F and F+ centers on MgO/Ag(100) or MgO/Mo(100) ultrathin films: Are they stable? J. Phys. Chem. C 112, 3857 (2008)CrossRefGoogle Scholar
  47. 47.
    H.M. Benia, X. Lin, H.J. Gao, N. Nilius, H.J. Freund, Nucleation and growth of gold on mgo thin films: A combined STM and luminescence Study. J. Phys. Chem. C 111, 10528–10533 (2007)CrossRefGoogle Scholar
  48. 48.
    F. Stavale, N. Nilius, H.J. Freund, STM luminescence spectroscopy of intrinsic defects in ZnO(0001̅) thin films. J. Phys. Chem. Lett. 4, 3972–3976 (2013)CrossRefGoogle Scholar
  49. 49.
    S. Thiel, G. Hammerl, A. Schmehl, C.W. Schneider, J. Mannhart, Tunable quasi-two-dimensional electron gases in oxide heterostructures. Science 313, 1942–1945 (2006)CrossRefGoogle Scholar
  50. 50.
    V.S. Fomenko, Handbook of thermionic properties, ed. by G, vol. Samsonov (Plenum Press Data Division, New York, 1966)CrossRefGoogle Scholar
  51. 51.
    M. Minohara, R. Yasuhara, H. Kumigashira, M. Oshima, Termination layer dependence of Schottky barrier height for La0.6Sr0.4MnO3/Nb:SrTiO3 heterojunctions. Phys. Rev. B 81, 235322 (2010)CrossRefGoogle Scholar
  52. 52.
    G. Berner, A. Muller, F. Pfaff, J. Walde, C. Richter, J. Mannhart, S. Thiess, A. Gloskovskii, W. Drube, M. Sing, R. Claessen, Band alignment in LaAlO3/SrTiO3 oxide heterostructures inferred from hard x-ray photoelectron spectroscopy. Phys. Rev. B 88, 115111 (2013)CrossRefGoogle Scholar
  53. 53.
    Y. Segal, J.H. Ngai, J.W. Reiner, F.J. Walker, C.H. Ahn, X-ray photoemission studies of the metal-insulator transition in LaAlO3/SrTiO3 structures grown by molecular beam epitaxy. Phys. Rev. B 80, 241107(R) (2009)CrossRefGoogle Scholar
  54. 54.
    J. Goniakowski, F. Finocchi, C. Noguera, Polarity of oxide surfaces and nanostructures. Rep. Prog. Phys. 71, 016501 (2008)CrossRefGoogle Scholar
  55. 55.
    C. Noguera, Polar oxide surfaces. J. Phys. Condens. Matter 12, R367 (2000)CrossRefGoogle Scholar
  56. 56.
    C. Noguera, J. Goniakowski, Polarity in oxide nano-objects. Chem. Rev. 113, 4073–4105 (2013)CrossRefGoogle Scholar
  57. 57.
    P.W. Tasker, The stability of ionic crystal surfaces. J. Phys. C: Solid State Phys. 12, 4977 (1979)CrossRefGoogle Scholar
  58. 58.
    M. Gajdardziska-Josifovska, P.A. Crozier, J.M. Cowley, A (√3 × √3)R30° reconstruction on annealed (111) surfaces of MgO. Surf. Sci. Lett. 248, L259–L264 (1991)Google Scholar
  59. 59.
    V.E. Henrich, Thermal faceting of (110) and (111) surfaces of MgO. Surf. Sci. 57, 385 (1976)CrossRefGoogle Scholar
  60. 60.
    H. Onishi, C. Egawa, T. Aruga, Y. Iwasawa, Adsorption of Na atoms and oxygen-containing molecules on MgO(100) and (111) surfaces. Surf. Sci. 191, 479–491 (1987)CrossRefGoogle Scholar
  61. 61.
    M. Tsukada, T. Hoshino, On the electronic structure of the polar surface of compound crystals. J. Phys. Soc. Jpn. 51, 2562–2567 (1982)CrossRefGoogle Scholar
  62. 62.
    J. Goniakowski, C. Noguera, Characteristics of Pd deposition on the MgO(111) surface. Phys. Rev. B 60, 16120 (1999)CrossRefGoogle Scholar
  63. 63.
    R. Plass, J. Feller, M. Gajdardziska-Josifovska, Morphology of MgO(111) surfaces: artifacts associated with the faceting of polar oxide surfaces into neutral surfaces. Surf. Sci. 414, 26–37 (1998)CrossRefGoogle Scholar
  64. 64.
    R. Plass, K. Egan, C. Collazo-Davila, D. Grozea, E. Landree, I.D. Marks, M. Gajdardziska-Josifovska, Cyclic ozone identified in magnesium oxide (111) surface reconstructions. Phys. Rev. Lett. 81, 4891 (1998)CrossRefGoogle Scholar
  65. 65.
    J. Ciston, A. Subramanian, L.D. Marks, Water-driven structural evolution of the polar MgO (111) surface: An integrated experimental and theoretical approach. Phys. Rev. B 79, 085421 (2009)CrossRefGoogle Scholar
  66. 66.
    R. Arita, Y. Tanida, S. Entani, M. Kiguchi, K. Saiki, H. Aoki, Polar surface engineering in ultra-thin MgO(111)/Ag(111)—possibility of metal-insulator transition and magnetism. Phys. Rev. B 69, 235423 (2004)CrossRefGoogle Scholar
  67. 67.
    M. Kiguchi, S. Entani, K. Saiki, T. Goto, A. Koma, Atomic and electronic structure of an unreconstructed polar MgO(111) thin film on Ag(111). Phys. Rev. B 68, 115402 (2003)CrossRefGoogle Scholar
  68. 68.
    M. Xue, Q. Guo, Layer-by-layer growth of polar MgO (111) ultrathin films. J. Chem. Phys. 127, 054705 (2007)CrossRefGoogle Scholar
  69. 69.
    K. Matsuzaki, H. Hosono, T. Susaki, Layer-by-layer epitaxial growth of polar MgO(111) thin films. Phys. Rev. B 82, 033408 (2010)CrossRefGoogle Scholar
  70. 70.
    E.A. Paisley, T.C. Shelton, S. Mita, R. Collazo, H.M. Christen, Z. Sitar, M.D. Biegalski, J.P. Maria, Surfactant assisted growth of MgO films on GaN. Appl. Phys. Lett. 101, 092904 (2012)CrossRefGoogle Scholar
  71. 71.
    V.K. Lazarov, Z. Cai, K. Yoshida, K.H.L. Zhang, M. Weinert, K.S. Ziemer, P.J. Hasnip, Dynamically stabilized growth of polar oxides: the case of MgO(111). Phys. Rev. Lett. 107, 056101 (2011)CrossRefGoogle Scholar
  72. 72.
    H.S. Craft, J.F. Ihlefeld, M.D. Losego, R. Collazo, Z. Sitar, J.P. Maria, MgO epitaxy on GaN (0002) surfaces by molecular beam epitaxy. Appl. Phys. Lett. 88, 212906 (2006)CrossRefGoogle Scholar
  73. 73.
    T.L. Goodrich, J. Parisi, Z. Cai, K.S. Ziemer, Low temperature growth of crystalline magnesium oxide on hexagonal silicon carbide (0001) by molecular beam epitaxy. Appl. Phys. Lett. 90, 042910 (2007)CrossRefGoogle Scholar
  74. 74.
    A. Posadas, F.J. Walker, C.H. Ahn, T.L. Goodrich, Z. Cai, K.S. Ziemer, Epitaxial MgO as an alternative gate dielectric for SiC transistor applications. Appl. Phys. Lett. 92, 233511 (2008)CrossRefGoogle Scholar
  75. 75.
    K. Matsuzaki, H. Takagi, H. Hosono, T. Susaki, Structural study of polar MgO(111) epitaxial thin films grown on SrTiO3(111). Phys. Rev. B 84, 235448 (2011)CrossRefGoogle Scholar
  76. 76.
    J. Goniakowski, C. Noguera, L. Giordano, Prediction of uncompensated polarity in ultrathin films. Phys. Rev. Lett. 98, 205701 (2007)CrossRefGoogle Scholar
  77. 77.
    H. Kato, K. Miyamoto, M. Sano, T. Yao, Polarity control of ZnO on sapphire by varying the MgO buffer layer thickness. Appl. Phys. Lett. 84, 4562 (2004)CrossRefGoogle Scholar
  78. 78.
    C. Martínez-Boubeta, A.S. Botana, V. Pardo, D. Baldomir, A. Antony, J. Bertomeu, J.M. Rebled, L. López-Conesa, S. Estradé, F. Peiró, Heteroepitaxial growth of MgO(111) thin films on Al2O3(0001): Evidence of a wurtzite to rocksalt transformation. Phys. Rev. B 86, 041407(R) (2012)Google Scholar
  79. 79.
    S. Kumada, K. Matsuzaki, H. Hosono, T. Susaki, Tuning of surface roughness and lattice constant in MgO(111)/Al2O3(0001) grown by laser energy controlled pulsed laser deposition. Jpn. J. Appl. Phys. 50, 085503 (2011)Google Scholar
  80. 80.
    H.T. Yuan, Y.Z. Liu, Z.Q. Zeng, Z.X. Mei, Y. Guo, P. Zhang, X.L. Du, J.F. Jia, Z. Zhang, Q.K. Xue, Formation of metastable MgO structures on type-III oxide surfaces: effect of periodic out-of-plane electric dipole moment of substrates. J. Cryst. Growth 311, 425 (2009)CrossRefGoogle Scholar
  81. 81.
    T. Kamiya, H. Ohta, M. Kamiya, K. Nomura, K. Ueda, M. Hirano, H. Hosono, Li-doped NiO epitaxial thin film with atomically flat surface. J. Mater. Res. 19, 913–920 (2004)CrossRefGoogle Scholar
  82. 82.
    H. Ohta, M. Hirano, K. Nakahara, H. Maruta, T. Tanabe, M. Kamiya, T. Kamiya, H. Hosono, Fabrication and photoresponse of a pn-heterojunction diode composed of transparent oxide semiconductors, p-NiO and n-ZnO. Appl. Phys. Lett. 83, 1029 (2003)CrossRefGoogle Scholar
  83. 83.
    A. Barbier, C. Mocuta, H. Kuhlenbeck, K.F. Peters, B. Richter, G. Renaud, Atomic structure of the polar NiO(111)- p(2 × 2) surface. Phys. Rev. Lett. 84, 2897 (2000)CrossRefGoogle Scholar
  84. 84.
    A. Barbier, C. Mocuta, G. Renaud, Structure, transformation, and reduction of the polar NiO(111) surface. Phys. Rev. B 62, 16056 (2000)CrossRefGoogle Scholar
  85. 85.
    C.A. Ventrice Jr., Th Bertrams, H. Hannemann, A. Brodde, H. Neddermeyer, Stable reconstruction of the polar (111) surface of NiO on Au(111). Phys. Rev. B 49, 5773 (1994)CrossRefGoogle Scholar
  86. 86.
    M. Gibert, P. Zubko, R. Scherwitzl, J. Íñiguez, J. Triscone, Exchange bias in LaNiO3–LaMnO3 superlattices. Nat. Mater. 11, 195–198 (2012)CrossRefGoogle Scholar
  87. 87.
    K. Ueda, H. Tabata, T. Kawai, Ferromagnetism in LaFeO3-LaCrO3 superlattices. Science 280, 1064–1066 (1998)CrossRefGoogle Scholar
  88. 88.
    Y. Chen, S.K. Hong, H.J. Ko, V. Kirshner, H. Wenisch, T. Yao, K. Inaba, Y. Segawa, Effects of an extremely thin buffer on heteroepitaxy with large lattice mismatch. Appl. Phys. Lett. 78, 3352 (2001)CrossRefGoogle Scholar
  89. 89.
    Y. Chen, H.J. Ko, S.K. Hong, T. Yao, Layer-by-layer growth of ZnO epilayer on Al2O3(0001) by using a MgO buffer layer. Appl. Phys. Lett. 76, 559 (2000)CrossRefGoogle Scholar
  90. 90.
    A. Biswas, P.B. Rossen, C.H. Yang, W. Siemons, M.H. Jung, I.K. Yang, R. Ramesh, Y.H. Jeong, Universal Ti-rich termination of atomically flat SrTiO3 (001), (110), and (111) surfaces. Appl. Phys. Lett. 98, 051904 (2011)CrossRefGoogle Scholar
  91. 91.
    J. Goniakowski, L. Giordano, C. Noguera, Polarity of ultrathin MgO(111) films deposited on a metal substrate. Phys. Rev. B 81, 205404 (2010)CrossRefGoogle Scholar
  92. 92.
    T. Susaki, N. Shigaki, K. Matsuzaki, H. Hosono, Work function modulation in MgO/Nb:SrTiO3 by utilizing highly nonequilibrium thin film growth. Phys. Rev. B 90, 035453 (2014)CrossRefGoogle Scholar
  93. 93.
    J. Goniakowski, C. Noguera, L. Giordano, Using polarity for engineering oxide nanostructures: Structural phase diagram in free and supported MgO(111) ultrathin films. Phys. Rev. Lett. 93, 215702 (2004)CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Secure Materials Center, Materials and Structures LaboratoryTokyo Institute of TechnologyYokohamaJapan
  2. 2.Mitsubishi Chemical Group Science and Technology Research CenterYokohamaJapan

Personalised recommendations