Advertisement

Wasp-Inspired Needle Insertion with Low Net Push Force

  • Tim Sprang
  • Paul Breedveld
  • Dimitra Dodou
Conference paper
Part of the Lecture Notes in Computer Science book series (LNCS, volume 9793)

Abstract

This paper outlines the development of a four-part needle prototype inspired by the ovipositor of parasitic wasps. In the wasp ovipositor, three longitudinal segments called valves move reciprocally to gain depth in the substrate. It has been suggested that serrations located along the wasp ovipositor induce a friction difference between moving and anchoring valves that is needed for this reciprocal motion. Such an anchoring mechanism may not be desired in a medical setting, as serrations can induce tissue damage. Our aim was to investigate whether a multipart needle can penetrate tissue phantom material with near-zero net push force while using needle parts devoid of surface gripping textures or serrations. Accordingly, a four-part needle prototype was developed and tested in gelatine substrates. The performance of the prototype was assessed in terms of the degree of slipping of the needle with respect to the gelatine, with less slip implying better performance. Slip decreased with decreasing gelatine concentration and increasing offset between the needle parts. Motion through gelatine was achieved with a maximum push force of 0.035 N. This study indicates the possibility of needle propagation into a substrate with low net push force and without the need of serrations on the needle surface.

Keywords

Percutaneous interventions Wasp ovipositor Biomimetics 

Notes

Acknowledgements

This research is supported by the Dutch Technology Foundation STW, which is part of the Netherlands Organization for Scientific Research (NWO), and which is partly funded by the Ministry of Economic Affairs (project 12712, STW Perspectief Program iMIT-Instruments for Minimally Invasive Techniques).

References

  1. 1.
    Abolhassani, N., Patel, R., Moallem, M.: Needle insertion into soft tissue: a survey. Med. Eng. Phys. 29, 413–431 (2007)CrossRefGoogle Scholar
  2. 2.
    Misra, S., Reed, K.B., Schafer, B.W., Ramesh, K.T., Okamura, A.M.: Observations and models for needle-tissue interactions. In: IEEE International Conference on Robotics and Automation, pp. 2687–2692 (2009)Google Scholar
  3. 3.
    Frasson, L., Parittotokkaporn, T., Davies, B.L., Rodriguez y Baena, F.: Early developments of a novel smart actuator inspired by nature. In: 15th International Conference on Mechatronics and Machine Vision in Practice, pp. 163–168 (2008)Google Scholar
  4. 4.
    Ebrahimi, R., Okazawa, S., Rohling, R., Salcudean, S.E.: Hand-held steerable needle device. In: Ellis, R.E., Peters, T.M. (eds.) MICCAI 2003. LNCS, vol. 2879, pp. 223–230. Springer, Heidelberg (2003)CrossRefGoogle Scholar
  5. 5.
    Engh, J.A., Podnar, G., Khoo, S.Y., Riviere, C.N.: Flexible needle steering system for percutaneous access to deep zones of the brain. In: IEEE 32nd Annual Northeast Conference on Bioengineering, pp. 103–104 (2006)Google Scholar
  6. 6.
    Frasson, L., Ko, S.Y., Turner, A., Parittotokkaporn, T., Vincent, J.F., Rodriguez y Baena, F.: STING: a soft-tissue intervention and neurosurgical guide to access deep brain lesions through curved trajectories. J. Eng. Med. 224, 775–788 (2010)CrossRefGoogle Scholar
  7. 7.
    Frasson, L., Ferroni, F., Ko, S.Y., Dogangil, G., Rodriguez y Baena, F.: Experimental evaluation of a novel steerable probe with a programmable bevel tip inspired by nature. J. Robot. Surg. 6, 189–197 (2012)CrossRefGoogle Scholar
  8. 8.
    Walsh, C.J., Franklin, J.C., Slocum, A., Gupta, R.: Material selection and force requirements for the use of pre curved needles in distal tip manipulation mechanisms. In: Design of Medical Devices Conference, 3913 (2010).Google Scholar
  9. 9.
    Webster, R.J., Okamura, A.M., Cowan, N.J.: Toward active cannulas: miniature snake-like surgical robots. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2857–2863 (2006)Google Scholar
  10. 10.
    Scali, M., Pusch, T.P., Breedveld, P., Dodou, D.: Needle-Like Instruments for Steering Through Solid Organs: a Review of the Scientific and Patent Literature (submitted)Google Scholar
  11. 11.
    Van de Berg, N.J., Van Gerwen, D.J., Dankelman, J., Van den Dobbelsteen, J.J.: Design choices in needle steering—a review. IEEE-ASME T. Mech. 20, 2172–2183 (2015)CrossRefGoogle Scholar
  12. 12.
    Rahman, M.H., Fitton, M.G., Quicke, D.L.: Ovipositor internal microsculpture in the braconidae (insecta, hymenoptera). Zool. Scr. 27, 319–332 (1998)CrossRefGoogle Scholar
  13. 13.
    Scudder, G.G.E.: Comparative morphology of insect genitalia. Annu. Rev. Entomol. 16, 379–406 (1971)CrossRefGoogle Scholar
  14. 14.
    Vincent, J.F.V., King, M.J.: The mechanism of drilling by wood wasp ovipositors. Biomimetics 3, 187–201 (1995)Google Scholar
  15. 15.
    Burrows, C., Secoli, R., Rodriguez y Baena, F.: Experimental characterisation of a biologically inspired 3D steering needle. In: 13th IEEE International Conference on Control, Automation and Systems, pp. 1252–1257 (2013)Google Scholar
  16. 16.
    Frasson, L., Parittotokkaporn, T., Schneider, A., Davies, B.L., Vincent, J.F.V., Huq, S.E., Degenaar, P., Rodriguez y Baena, F.R.: Biologically inspired microtexturing: investigation into the surface topography of next-generation neurosurgical probes. In: 30th IEEE Annual International Conference of the Engineering in Medicine and Biology Society, pp. 5611–5614 (2008)Google Scholar
  17. 17.
    Leibinger, A., Oldfield, M., Rodriguez y Baena, F.R.: Multi-objective design optimization for a steerable needle for soft tissue surgery. In: 15th International Conference on Biomedical Engineering, pp. 420–423 (2014)Google Scholar
  18. 18.
    Oldfield, M.J., Burrows, C., Kerl, J., Frasson, L., Parittotokkaporn, T., Beyrau, F., Rodriguez y Baena, F.: Highly resolved strain imaging during needle insertion: results with a novel biologically inspired device. J. Mech. Beh. Biomed. Mat. 30, 50–60 (2014)CrossRefGoogle Scholar
  19. 19.
    Parittotokkaporn, T., Frasson, L., Schneider, A., Huq, E., Davies, B.L., Degenaar, P., Biesenack, J., Rodriguez y Baena, F.R.: Soft tissue traversal with zero net push force: feasibility study of a biologically inspired design based on reciprocal motion. In: IEEE International Conference on Robotics and Biomimetics, pp. 80–85 (2009)Google Scholar
  20. 20.
    Aoyagi, S., Takaoki, Y., Takayanagi, H., Huang, C.-h., Tanaka, T., Suzuki, M., Takahashi, T., Kanzaki, T., Matsumoto, T.: Equivalent negative stiffness mechanism using three bundled needles inspired by mosquito for achieving easy insertion. In: 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2295–2300 (2012)Google Scholar
  21. 21.
    Sakes, A., Dodou, D., Breedveld, P.: Buckling prevention strategies in nature as inspiration for improving percutaneous instruments: a review. Bioinsp. Biomim. 11, 021001-1–021001-26 (2016)CrossRefGoogle Scholar
  22. 22.
  23. 23.
    Hing, J.T., Brooks, A.D., Desai, J.P.: Reality-based needle insertion simulation for haptic feedback in prostate brachytherapy. IEEE International Conference on Robotics and Automation, pp. 619–624 (2006)Google Scholar
  24. 24.
    Simone, C., Okamura, A.M.: Modeling of needle insertion forces for robot-assisted percutaneous therapy. In: IEEE International Conference on Robotics and Automation, vol. 2, pp. 2085–2091 (2002)Google Scholar
  25. 25.
    Van Gerwen, D.J., Dankelman, J., Van den Dobbelsteen, J.J.: Needle-tissue interaction forces-a survey of experimental data. Med. Eng. Phys. 34, 665–680 (2012)CrossRefGoogle Scholar
  26. 26.
    Nguyen, M.M., Zhou, S., Robert, J.L., Shamdasani, V., Xie, H.: Development of oil-in-gelatin phantoms for viscoelasticity measurement in ultrasound shear wave elastography. Ultrasound Med. Biol. 40, 168–176 (2014)CrossRefGoogle Scholar
  27. 27.
    Moreira, P., Peterlik, I., Herink, M., Duriez, C., Cotin, S., Misra, S.: Modelling prostate deformation: SOFA versus experiments. Mech. Eng. Res. 3, 64–72 (2013)CrossRefGoogle Scholar
  28. 28.
    Ng, K.W., Goh, J.Q., Foo, S.L., Ting, P.H., Lee, T.K.: Needle insertion forces studies for optimal surgical modeling. Int. J. Bioscience Biochem. Bioinformatics 3, 187–191 (2013)CrossRefGoogle Scholar
  29. 29.
    Zhang, X., Qiang, B., Greenleaf, J.: Comparison of the surface wave method and the indentation method for measuring the elasticity of gelatine phantoms of different concentrations. Ultrasonics 51, 157–164 (2011)CrossRefGoogle Scholar
  30. 30.
    De Lorenzo, D.: Force Sensing and Display in Robotic Driven Needles for Minimally Invasive Surgery. Doctoral dissertation, Politecnico di Milano, Milano (2012)Google Scholar
  31. 31.
    Crouch, J.R., Schneider, C.M., Wainer, J., Okamura, A.M.: A velocity-dependent model for needle insertion in soft tissue. In: Duncan, J.S., Gerig, G. (eds.) MICCAI 2005. LNCS, vol. 3750, pp. 624–632. Springer, Heidelberg (2005)CrossRefGoogle Scholar
  32. 32.
    Van Beek, A.: Advanced Engineering Design: Lifetime Performance and Reliability. Delft University of Technology, Delft (2006)Google Scholar
  33. 33.
    Quicke, D.L.: Ovipositor mechanics of the braconine wasp genus zaglyptogastra and the ichneumonid genus pristomerus. J. Nat. Hist. 25, 971–977 (1991)CrossRefGoogle Scholar

Copyright information

© Springer International Publishing Switzerland 2016

Authors and Affiliations

  1. 1.Department of BioMechanical Engineering, Faculty of Mechanical, Maritime and Materials EngineeringDelft University of TechnologyDelftthe Netherlands

Personalised recommendations