Abstract
The authors presented a short description of two optical devices developed for the analysis of the cross-section of the coal transported by a belt conveyor. Devices applied a laser with a vision camera and infrared distance sensors. The results presented in the paper were collected during field trials at the coal preparation plant. Tested devices were installed near the ash analyzer RODOS-W which uses natural gamma radiation for the ash determination and microwaves for the moisture measurement. The influence on ash and moisture measurements of the changing profile of the coal cross-section on the belt was investigated. Authors discussed advantages and disadvantages of both methods basing on results of field tests and analysed their usefulness for other purposes. The belt conveyor scale installed nearby the ash analyzer provides information about the amount of coal in the measurement zone. The comparison of cross-section area with corresponding scale results was used to check the possibility to develop an optical scale without a strain gauge.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Benet G., Blanes F.,. Simó J.E, Pérez P., Using infrared sensors for distance measurement in mobile robots, Robotics and Autonomous Systems, Volume 40, Issue 4, 30 September 2002,
Hardygóra M., Woźniak D.; Transport taśmowy w górnictwie surowców skalnych – eksploatacja taśm przenośnikowych; Prace Naukowe Instytutu Górnictwa Politechniki Wrocławskiej; nr 39/2011
Kryca. M, Sikora T.: Comparison of different methods for determination of ash content in coal. Society for Mining, Metallurgy, and Exploration, Inc (SME), XVI International Coal Preparation Congress, Kentucky, USA 2010
Kryca M. Sikora T.: Systems and Devices for Minerals Quality Monitoring in EMAG’s Activities. World Mining Congress Montreal, Canada 2013
MSHA’s Accident Prevention Program Safety Idea, AP2002-S005,2002 r. http://www.msha.gov/Accident_Prevention/ideas/beltslip.htm (access 15.11.2015)
NIOSH 2012, Engineering Considerations and Selection Criteria for Proximity Warning Systems for Mining Operations. http://www.cdc.gov/niosh/mining/content/pwsselection.html (access 15.11.2015)
Optical Belt scales –Hense Wägetechnik GmbH, http://www.hense-waegetechnik.de/ (access 15.11.2015)
Optical Belt scales - KEYTRADE” Ltd, http://keytrade.by/eng/catalogue/17163/17164/17356 (access 15.11.2015)
Smyła J., Molenda T., Szymała P., Loska P.: Bezkontaktowa rejestracja zsunięcia taśmy na przenośniku taśmowym –KARO-T. wyd. DRUK-ART, Napędy i Sterowanie nr 11/2015
Sikora T., Będkowski Z., Smyła J.: Automation of technological processes in a coal preparation plant and useful systems and devices for monitoring of coal quality; AGH Journal of Mining and Geoengineering, vol.36 No.3 2012
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Kryca, M., Wojtas, P., Kozlowski, A. (2016). Optical analysis of the coal on belt distribution and its use in qualitative and quantitative measurements. In: Litvinenko, V. (eds) XVIII International Coal Preparation Congress. Springer, Cham. https://doi.org/10.1007/978-3-319-40943-6_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-40943-6_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-40942-9
Online ISBN: 978-3-319-40943-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)