Abstract
When a component or structure is designed or its residual life is determined, it is essential that the strength of the material is compared to the allowable load.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Blumenauer, H., Pusch, G.: Technische Bruchmechanik. Deutscher Verlag für Grundstoffindustrie, Leipzig (1993)
ASTM: Annual book of ASTM Standards 2009. Section 3: Metals Test Methods and Analytical Procedures, vol. 03.01, Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, E 399-09
ASTM: Annual book of ASTM Standards 2011. Section 3: Metals Test Methods and Analytical Procedures, vol. 03.01, Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, E 647-11ε1
Sander, M., Richard, H.A.: Lebensdauervorhersage unter bruchmechanischen Gesichtspunkten. Materialprüfung 46, 495–500 (2004)
Sheldon, J.W., Bain, K.R., Donald, J.K.: Investigation of the effects of shed-rate, initial Kmax and geometric constraint on & #x0394;Kth in Ti-6Al-4 V at room temperature. Int. J. Fatigue 21, 733–741 (1999)
McClung, R.C.: Analysis of Fatigue Crack Closure During Simulated Threshold Testing. In: Newman Jr, J.C., Piascik, R.S. (eds.) Fatigue Crack Growth Threshold, Endurance Limits and Design, ASTM STP 1372, pp. 209–226. ASTM, West Conshohocken (2000)
Newman Jr, J.C.: Analyses of fatigue crack growth and closure near threshold conditions for large-crack behavior. In: Newman Jr, J.C., Piascik, R.S. (eds.) Fatigue Crack Growth Threshold, Endurance Limits and Design, ASTM STP 1372, pp. 227–251. ASTM, West Conshohocken (2000)
Pippan, R., Stüwe, H.P., Golos, K.: A comparison of different methods to determine the threshold of fatigue crack propagation. Int. J. Fatigue 16, 579–582 (1994)
Hübner, P., Pusch, G., Zerbst, U.: Ableitung von Quantilrisswachstumskurven für Restlebensdauerberechnungen. In: DVM-Bericht 236, Deutscher Verband für Materialforschung und-prüfung, Berlin, 2004, S. 121–130
Newman, J.A., Riddle, W.T., Piascik, R.S.: Effects of Kmax on fatigue crack growth thresholds in aluminium alloys. In: Newman Jr, J.C., Piascik, R.S. (eds.) Fatigue Crack Growth Threshold, Endurance Limits and Design, ASTM STP 1372, pp. 63–77. ASTM, West Conshohocken (2000)
Döker, H.: Schwellenwert für Ermüdungsrissausbreitung: Bestimmung und Anwendung. In: DVM-Bericht 234, Deutscher Verband für Materialforschung und-prüfung, S. 9–18, Berlin (2002)
Tabernig, B., Pippan, R.: Determination of length dependence of the threshold for fatigue crack propagation. Eng. Fract. Mech. 69, 899–907 (2002)
Newman Jr, J.C., Schneider, J., Daniel, A., McKnight, D.: Compression pre-cracking to generate near threshold fatigue-crack-growth rates in two behaviour alloys. Int. J. Fatigue 27, 1432–1440 (2005)
Forth, S.C., Newman Jr, J.C., Forman, R.G.: On generating fatigue crack growth thresholds. Int. J. Fatigue 25, 9–15 (2003)
Plank, R., Kuhn, R.: Automatisierte Risslängenmessung bei Ermüdungsrissausbreitung unter Mixed-Mode-Beanspruchung. Tech. Mess. 63, 51–55 (1996)
Sander, M.: Einfluss variabler Belastung auf das Ermüdungsrisswachstum in Bauteilen und Strukturen. Fortschritt-Berichte VDI, Reihe 18, Nr. 287. VDI-Verlag, Düsseldorf (2003)
Sander, M., Richard, H.A.: Automatisierte Ermüdungsrissausbreitungsversuche. Materialprüfung 46, 22–26 (2004)
Döker, H.: Fatigue crack growth threshold: implications, determination and data evaluation. Int. J. Fatigue 19, S145–S149 (1997)
FKM-Richtlinie: Bruchmechanischer Festigkeitsnachweis für Maschinenbauteile. VDMA-Verlag, Frankfurt (2006)
NASGRO®: Fatigue crack growth computer program “NASGRO” Version 5.2, Southwest Research Institute (2008)
Henkel, S., Hübner, P., Pusch, G.: Zyklisches Risswachstumsverhalten von Gusseisenwerkstoffen—Analytische und statistische Aufbereitung für die Nutzung mit dem Berechnungsprogramm ESACRACK. In: DVM-Bericht 240, Deutscher Verband für Materialforschung und—prüfung, S. 251–259, Berlin (2008)
Richard, H.A., Tenhaeff, D., Hahn, H.G.: Critical survey of Mode II fracture specimens. In: International Conference and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics and Failure Analysis. Salt Lake City (1985)
Richard, H.A.: Eine neue KIIC-Probe. Vorträge der 12. Sitzung des Arbeitskreises Bruchvorgänge. Deutscher Verband für Materialprüfung, S. 61–69, Berlin (1980)
Richard, H.A.: A new compact sheer specimen. Int. J. Fracture 17, R105–R107 (1981)
Richard, H.A.: Bruchvorhersagen bei überlagerter Normal- und Schubbeanspruchung von Rissen. VDI-Forschungsheft 631. VDI-Verlag, Düsseldorf (1985)
Richard, H.A.: Specimens for investigating biaxial fracture and fatigue processes. In: Brown, M.W., Miller, K. J. (eds.) Biaxial and Multiaxial Fatigue, EGF3, S. 217–229. Mechanical Engineering Publications, London (1989)
Richard, H.A., Fulland, M., Sander, M.: Theoretical crack path prediction. Fatigue Fract. Eng. Mater. Struct. 28, 3–12 (2005)
Richard, H.A.: Praxisgerechte Simulation des Werkstoff- und Bauteilverhaltens durch überlagerte Zug-, ebene Schub- und nichtebene Schubbelastung von Proben. Vorträge zur Jahrestagung ’83 „Werkstoff-Bauteil-Schaden“, S. 269–274. VDI-Gesellschaft Werkstofftechnik, Düsseldorf (1983)
Richard, H.A., Kuna, M.: Theoretical and experimental study of superimposed fracture modes I, II and III. Eng. Fract. Mech. 35, 949–960 (1990)
Buchholz, F.-G., Richard, H.A.: From compact tension shear (CTS) to all fracture modes (AFM) specimen and loading devices. In: Proceedings of International Conference on Advances in Structural Integrity. Indian Institute of Science, Bangalore (2004)
Schwalbe, K.H.: Bruchmechanik metallischer Werkstoffe. Hanser-Verlag, München (1980)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Richard, H.A., Sander, M. (2016). Experimental Determination of Fracture-Mechanical Material Parameters. In: Fatigue Crack Growth. Solid Mechanics and Its Applications, vol 227. Springer, Cham. https://doi.org/10.1007/978-3-319-32534-7_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-32534-7_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32532-3
Online ISBN: 978-3-319-32534-7
eBook Packages: EngineeringEngineering (R0)