Pyrolysis Bio-Oil Upgrading to Renewable Liquid Fuels by Catalytic Hydrocracking: Effect of Operating Conditions on the Process
This work analyses the influence of operating conditions during the catalytic hydrocracking of a bio-oil obtained from the fast pyrolysis of pinewood. The original liquid has a 39 wt.% of water and the following elemental composition in dry basis: 54 wt.% C, 3.3 wt.% H, 41.3 wt.% O, 0.8 wt.% N and 0.6 wt.% S.
Experiments were carried out in a batch microbomb reactor employing a co-precipitated Ni–Co/Al–Mg catalyst. They were planned according to a full factorial design of experiments with a statistical analysis of the results in order to analyse the effects of temperature (350–450 °C), hydrogen pressure (70–150 bar), catalyst/bio-oil mass ratio (0–0.25 g catalyst/g organics), reaction time (0–60 min) and all interactions between these operating variables on the process. Statistical analysis of the results indicates that the operating conditions have a statistically significant effect on the results. Specifically, the yields to upgraded bio-oil (liquid), gas and solid vary in ranges of 3–97 %, 0–86 % and 3–41 % respectively. Depending on the operating conditions, the amount of C, H and O (wt.%) in the upgraded bio-oil varies in ranges of 50–82, 3.5–8.3 and 9–44 respectively. This represents an increase of up to 52 and 150 % in the proportion of C and H respectively, as well as a decrease of up to 78 % in the proportion of O. The higher heating value of the treated bio-oil varies from 19 to 37 MJ/kg, which is considerably higher than that of the original bio-oil.
KeywordsBio-oil Hydrocracking Upgrading Biofuels
The authors wish to express their gratitude to the Spanish MINECO (projects ENE2010-18985 and ENE2013-41523-R) for their financial support and the FPI (BES-2011-044856) and mobility (EEBB-I-14-08688) grants awarded to Javier Remón Núñez.
<SimplePara><Emphasis Type="Bold">Open Access</Emphasis> This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. </SimplePara> <SimplePara>The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.</SimplePara>