Abstract
One of the challenges of field testing planetary rovers on Earth is the difference in gravity between the test and the intended operating conditions. This not only changes the weight exerted by the robot on the surface but also affects the behaviour of the granular surface itself, and unfortunatly no field test can fully address this shortcoming. This research introduces novel experimentation that for the first time subjects planetary excavator robots to gravity offload (a cable pulls up on the robot with 5/6 its weight, to simulate lunar gravity) while they dig. Excavating with gravity offload underestimates the detrimental effects of gravity on traction, but overestimates the detrimental effects on excavation resistance; though not ideal, this is a more balanced test than excavating in Earth gravity, which underestimates detrimental effects on both traction and resistance. Experiments demonstrate that continuous excavation (e.g. bucket-wheel) fares better than discrete excavation (e.g. front-loader) when subjected to gravity offload, and is better suited for planetary excavation. This key result is incorporated into the development of a novel planetary excavator prototype. Lessons learned from the prototype development also address ways to mitigate suspension lift-off for lightweight skid-steer robots, a problem encountered during mobility field testing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Agui, J.H., Wilkinson, A.: Granular flow and dynamics of lunar simulants in excavating implements. In: ASCE Earth & Space 2010 Proceeding. Honolulu, HI (2010)
Bartlett, P., Wettergreen, D., Whittaker, W.: Design of the scarab rover for mobility and drilling in the lunar cold traps. In: International Symposium on Artificial Intelligence, Robotics and Automation in Space, pp. 3–6. Citeseer (2008)
Boles, W.W., Scott, W.D., Connolly, J.F.: Excavation forces in reduced gravity environment. J. Aerosp. Eng. 10(2), 99–103 (1997)
Carlone, T.J.: Investigating suspension lift-off of skid-steer rovers with passive differential suspension. Master’s thesis, Carnegie Mellon University (2013)
Caruso, J.J., Spina, D.C., Greer, L.C., John, W.T., Michele, C., Krasowski, M.J., Prokop, N.F.: Excavation on the moon: regolith collection for oxygen production and outpost site preparation. Technical Report 20080012503, NASA Glenn Research Center, Cleveland, Ohio 44135 (2008)
Clark, D.L., Patterson, R., Wurts, D.: A novel approach to planetary regolith collection: the bucket drum soil excavator. In: AIAA Space 2009 Conference and Exposition (2009)
Freitag, D., Green, A., Melzer, K.: Performance evaluation of wheels for lunar vehicles. Technical report, DTIC Document (1970)
Harrison, D.A., Ambrose, R., Bluethmann, B., Junkin, L.: Next generation rover for lunar exploration. In: 2008 IEEE Aerospace Conference, pp. 1–14. IEEE (2008)
Hettiaratchi, D., Witney, B., Reece, A.: The calculation of passive pressure in two-dimensional soil failure. J. Agr. Eng. Res. 11(2), 89–107 (1966)
Johnson, L., Van Susante, P.: Excavation system comparison: bucket wheel vs. bucket ladder. In: Space Resources Roundtable VIII. Golden, CO (2006)
King, R., van Susante, P., Mueller, R.: Comparison of lance blade force measurements with analytical model results. In: Space Resources Roundtable XI/Planetary and Terrestrial Mining Sciences Symposium Proceedings (2010)
Kobayashi, T., Fujiwara, Y., Yamakawa, J., Yasufuku, N., Omine, K.: Mobility performance of a rigid wheel in low gravity environments. J. Terramech. 47(4), 261–274 (2010)
Mueller, R.P., Smith, J.D., Cox, R.E., Schuler, J.M., Ebert, T., Nick, A.J.: Regolith advanced surface systems operations robot (rassor). In: IEEE Aerospace (2013)
Mueller, R.P., Van Susante, P.J.: A review of lunar regolith excavation robotic device prototypes. In: AIAA Space (2011)
Muff, T., Johnson, L., King, R., Duke, M.: A prototype bucket wheel excavator for the moon, mars and phobos. In: AIP Conference Proceedings, vol. 699, p. 967 (2004)
Oravec, H., Zeng, X., Asnani, V.: Design and characterization of grc-1: A soil for lunar terramechanics testing in earth-ambient conditions. J. Terramech. 47(6), 361–377 (2010)
Skonieczny, K., Delaney, M., Wettergreen, D.S., “Red" Whittaker, W.L.: Productive lightweight robotic excavation for the moon and mars. J. Aerosp. Eng. 27(4), 1–8 (2014)
Skonieczny, K., Moreland, S., Wettergreen, D., Whittaker, W.: Advantageous bucket-wheel configuration for lightweight planetary excavators. In: International Society for Terrain-Vehicle Systems International Conference (2011)
Stubbs, T.J., Vondrak, R.R., Farrell, W.M.: Impact of dust on lunar exploration. In: Dust in Planetary Systems, pp. 239–243. Kauai, HI (2005)
Theiss, R., Boucher, D., Viel, M., Roberts, D., Kutchaw, J.: Interchangeable payloads for ISRU mobility chassis. In: Space Resources Roundtable XI/Planetary and Terrestrial Mining Sciences Symposium Proceedings (2010)
Turnage, G., Banks, D.: Lunar surface mobility studies past and future. Technical report, DTIC Document (1989)
Wettergreen, D., Moreland, S., Skonieczny, K., Jonak, D., Kohanbash, D., Teza, J.: Design and field experimentation of a prototype lunar prospector. Int. J. Robot. Res. 29(12), 1550–1564 (2010)
White, C.V., Frankovich, J.K., Yates, P., Wells Jr, G., Robert, L.: A capable and temporary test facility on a shoestring budget: the MSL touchdown test facility. In: 24th Aerospace Testing Seminar, 8 Apr 2008, Manhattan Beach, California. Jet Propulsion Laboratory, National Aeronautics and Space Administration, Pasadena, CA (2008)
Wong, J.: Predicting the performances of rigid rover wheels on extraterrestrial surfaces based on test results obtained on earth. J. Terramech. 49(1), 49–61 (2012)
Wong, J., Asnani, V.: Study of the correlation between the performances of lunar vehicle wheels predicted by the nepean wheeled vehicle performance model and test data. Proc. Inst. Mech. Eng. Part D: J. Automobile Eng. 222(11), 1939–1954 (2008)
Acknowledgments
This work was supported by NASA under grants NNX11CB55C and NNX07AE30G. We thank Rob Mueller for his support of this work as NASA COTR. We also thank Colin Creager, whose tireless collaboration and support at SLOPE enabled key aspects of these experiments.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Skonieczny, K., Carlone, T., “Red” Whittaker, W.L., Wettergreen, D.S. (2016). Considering the Effects of Gravity When Developing and Field Testing Planetary Excavator Robots. In: Wettergreen, D., Barfoot, T. (eds) Field and Service Robotics. Springer Tracts in Advanced Robotics, vol 113. Springer, Cham. https://doi.org/10.1007/978-3-319-27702-8_20
Download citation
DOI: https://doi.org/10.1007/978-3-319-27702-8_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-27700-4
Online ISBN: 978-3-319-27702-8
eBook Packages: EngineeringEngineering (R0)