Abstract
The aim of this text is to consider some of the engineering aspects of the thermal processing of packaged foods. These include the establishment of a thermal process through mathematical and experimental techniques, and the delivery of the thermal process, involving the correct operation and control of the process equipment. Many aspects of the complete process outlined in Fig. 1.1 have not been dealt with, in particular the food preparation operations, filling and seaming or sealing, can-handling procedures, and hygienic aspects of equipment design and operation. However, an attempt has been made to cover the main aspects of the thermal process and to review developments. In conclusion, it is necessary to consider some of the procedures used in what is today referred to as “good manufacturing practice” (GMP) in terms of legislation and processing guidelines. The aim of thermal processing of packaged foods is to assure that the food is free of microorganisms that can produce foodborne illness. In the case of canned food, the target microorganism is Clostridium botulinum, which produces a toxin responsible for serious illness in humans, called botulism. This toxin can affect the nervous system, causing paralysis and sometimes death. At the industrial level and because of legislation and code practices, foodborne botulism is uncommon and is a more complex trouble at the home canning level due to leakage of thermal processing. However, in the past, in the early stages of the canning industry and for close to half a century, the rapid spread of canned foods and evidence that they were causing illness led to recognition of the need to establish a means of assuring the safety of food products. For example, in 1918 in the USA, the first botulism commission was created. In 1922, it published its findings on the extent of botulism from commercially canned food. In 1922, Esty and Meyer determined the heat resistance of clostridium botulinum spores, establishing the basis of a microbiologically safe process for canned food. The recommendations proposed in this work for low-acid canned food were accepted by the US canning industry and later worldwide (Baird-Parker 1995).
Keywords
- Thermal Process
- Good Manufacturing Practice
- Clostridium Botulinum
- Critical Control Point
- Canning Industry
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Baird-Parker AC (1995) Development of industrial procedures to ensure the microbiological safety of food. Food Control 6:29–36
Bauman HE (1974) The HACCP concept and microbiological hazard categories. Food Technol 35:78–87
BSI (1987) Quality assurance—Handbook No. 22. British Standards Institution, London (This contains BS 5760 Quality systems: ISO 9000–9004, and other related standards)
Buchanan RL (1990) HACCP: a re-emerging approach to food safety. Trends Food Sci Technol 1(5):104–106
CCFRA (1987) Guidelines to the establishment of hazard analysis critical control point. Technical Manual No. 19. Campden & Chorleywood Food Research Association, Chipping Campden, Glos, UK
CCFRA (1989) The microbiological aspects of commissioning and operating production processes. Technical Manual No. 24. Campden & Chorleywood Food Research Association, Chipping Campden, Glos, UK
Chen CR, Rhamaswamy HS (2003) Analysis of critical control points in deviant thermal processes using artificial neural networks. J Food Eng 57(3):225–236
Denys S, Noronha J, Stoforos NG, Hendrickx M, Tobback P (1996) Evaluation of process deviations, consisting of drops in rotational speed, during thermal processing of foods in rotary water cascading retorts. J Food Eng 30(3/4):327–338
Esty JR, Meyer KF (1922) The heat resistance of the spores of C. botulinus and allied anaerobes. J Infect Dis 31:650–663
Giannoni-Succar EB, Hayakawa K (1982) Correction factors of deviant thermal processes applied to packaged heat conduction food. J Food Sci 47:642–646
Houtzer RL, Hill RC (1977) Effect of temperature deviations on process sterilization value with continuous agitating retorts. J Food Sci 42(3):755–777
Huang F, Hayakawa K (1983) A deviant heat process applied to canned or packaged liquid food. J Food Sci 48:1229–1234, 1241
ICMSF (1988). Application of the hazard analysis critical control point (HACCP). System to ensure microbiological safety and quality. In: Microorganisms in food 4. Blackwell Scientific Publications, Oxford
McConnell JEW (1952) Effect of a drop in retort temperature upon the lethality of processes for convection heating products. Food Technol 6(2):76–78
NFPA/FPI (1989) Canned foods—principles of thermal process control, acidification and container closure evaluation, 5th edn. The Food Processors’ Institute, Washington, DC
NRC (1985) An evaluation of the role of microbiological criteria for foods and food ingredients. Food Protection Committee, National Research Council, Washington, DC
Peri C (1991) PACCP: process analysis critical control point in food technology. Ital J Food Sci 3(1):5–10
Shapton DA (1986) Canned and bottled food products (soups, mayonnaise and sauces). In: Herschdoerfer SM (ed) Quality control in the food industry, vol 3. Academic, London, pp 261–322
Shapton DA, Shapton NF (eds) (1991) Principles and practices for the safe processing of foods. Butterworth-Heinemann, Oxford
Spinak S (2002) FDA approaches to process filing. In: Tucker GS (ed) Third international symposium on thermal processing—process and package innovation for convenience foods (session 3:1). Campden & Chorleywood Food Research Association, Chipping Campden, Glos, UK
Stroup WH (1982) Compensating for temperature drops in still retorts. J Food Protect 45(9):1022–1027
Tucker GS (2001) Validation of heat processes. In: Richardson P (ed) Thermal technologies in food processing. Woodhead Publishing, Cambridge, pp 75–90
Tucker GS, Noronha JF, Heydon CJ (1996) Experimental validation of mathematical procedures for the evaluation of thermal process deviations during the sterilization of canned foods. Food Bioprod Process, Trans IChemE 74(3):140–148
USDA (1990) Hazard analysis and critical control points system. National Advisory Committee on Microbiological Criteria, US Dept of Agriculture—Food Safety and Inspection Service, Washington, DC
Williams A (2004) Role of HACCP in managing thermal processing risks. In: Tucker GS (ed) Third international symposium on thermal processing—process and package innovation for convenience foods (session 3:2). Campden & Chorleywood Food Research Association, Chipping Campden, Glos, UK
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Holdsworth, S.D., Simpson, R. (2016). Safety Aspects of Thermal Processing. In: Thermal Processing of Packaged Foods. Food Engineering Series. Springer, Cham. https://doi.org/10.1007/978-3-319-24904-9_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-24904-9_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-24902-5
Online ISBN: 978-3-319-24904-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)