Abstract
Undoubtedly, an effective but expensive way of providing conforming items to a customer is making a complete inspection of all items before shipping. In an ideal situation, a process designed to assure zero defects would not need inspection at all. In practice, a compromise between these two extremes is attained, and acceptance sampling is the quality control technique that allows reducing the level of inspection according to the process performance. This chapter shows how to apply acceptance sampling using R and the related ISO standards.
Keywords
- Sampling Plan
- Acceptance Sampling
- Lower Specification Limit
- Inspection Effort
- Acceptance Sampling Plan
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, access via your institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsNotes
- 1.
It is relatively easy to implement this in an on-line process via an R interface like, Shiny (http://www.shiny.rstudio.com), possibly using automatically recorded measurements.
References
Ishikawa, K.: Guide to Quality Control. Asian Productivity Organisation, Tokyo (1991)
ISO TC69/SC1–Terminology and Symbols: ISO 3534-1:2006 - Statistics – Vocabulary and symbols – Part 1: General statistical terms and terms used in probability. Published standard (2010). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=40145
ISO TC69/SC1–Terminology and Symbols: ISO 3534-2:2006 - Statistics – Vocabulary and symbols – Part 2: Applied statistics. Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=40147
ISO TC69/SC1–Terminology and Symbols: ISO 3534-4:2014 - Statistics – Vocabulary and symbols – Part 4: Survey sampling. Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=56154
ISO TC69/SC5–Acceptance sampling: ISO 3951-3:2007 - Sampling procedures for inspection by variables – Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. Published standard (2010). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=40556
ISO TC69/SC5–Acceptance sampling: ISO 3951-1:2013 - Sampling procedures for inspection by variables – Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL. Published standard (2013). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=57490
ISO TC69/SC5–Acceptance sampling: ISO 3951-2:2013 - Sampling procedures for inspection by variables – Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics. Published standard (2013). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=57491
ISO TC69/SC5–Acceptance sampling: ISO 2859-1:1999 - Sampling procedures for inspection by attributes – Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=1141
ISO TC69/SC5–Acceptance sampling: ISO 2859-3:2005 - Sampling procedures for inspection by attributes – Part 3: Skip-lot sampling procedures. Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=34684
ISO TC69/SC5–Acceptance sampling: ISO 2859-5:2005 - Sampling procedures for inspection by attributes – Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection. Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=39295
ISO TC69/SC5–Acceptance sampling: ISO 3951-5:2006 - Sampling procedures for inspection by variables – Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation). Published standard (2014). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=39294
ISO TC69/SC5–Acceptance sampling: ISO 24153:2009 - Random sampling and randomization procedures. Published standard (2015). url http://www.iso.org/iso/catalogue_detail.htm?csnumber=42039
Juran, J., Gryna, F.: Juran’s Quality Control Handbook. Industrial Engineering Series. McGraw-Hill, New York (1988)
Kiermeier, A.: Visualizing and assessing acceptance sampling plans: the R package AcceptanceSampling. J. Stat. Softw. 26(6), 1–20 (2008). url http://www.jstatsoft.org/v26/i06/
Montgomery, D.: Statistical Quality Control, 7th edn. Wiley Global Education, New York (2012)
Schilling, E., Neubauer, D.: Acceptance Sampling in Quality Control. Statistics: A Series of Textbooks and Monographs, 2nd edn. Taylor & Francis, Boca Raton (2009)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Cano, E.L., Moguerza, J.M., Corcoba, M.P. (2015). Acceptance Sampling with R. In: Quality Control with R. Use R!. Springer, Cham. https://doi.org/10.1007/978-3-319-24046-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-24046-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-24044-2
Online ISBN: 978-3-319-24046-6
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)