Abstract
This chapter gives the reader an understanding of the managerial aspects of the reverse flows with various kinds of returns in manufacturing firms. With the increasing streams of returns over the product life cycle, including repair and replacement, end-of-use return, end-of-life return, production return flows, and distribution return, effective disposition of the returned products, components and packaging has grown as an urgent concern of manufacturing firms. Reverse logistics is intrinsically consistent with environmental sustainability. Manufacturing firms can reduce the emissions of hazardous emissions and energy consumption by maximizing tons per mile, consolidating shipments, optimizing the waste management and material recovery processes. These practices not only lower waste and pollution to protect the environment, but also enhance firms’ profitability, asset utilization, and sustainable development. The other important topic in closed loop supply chain management is the asset recovery—the process of maximizing the value of unused or end-of-life assets through effective identification, redeployment, and divestment. Asset recovery enables businesses to capture the full value of returned products and save economic costs in remanufacturing and reuse without violating the regulatory requirements, thereby strengthening the cost reduction and product quality control.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Carter CRE, Ellram LM (1998) Reverse logistics: are view of the literature and framework for future investigation. J Bus Logist 19(1):85–102
Sarkis J (2014) Green supply chain management. Momentum Press, New York
Winzelberg D (2012) How reverse logistics makes online returns easy and keeps customers happy. Available from http://www.forbes.com/sites/ups/2012/12/03/how-reverse-logistics-makes-online-returns-easy-and-keeps-customers-happy/
Park J, Sarkis J, Wu ZH (2010) Creating integrated business and environmental value within the context of China’s circular economy and ecological modernization. J Clean Prod 18(15):1491–1501
Yang JX, Lu B, Xu C (2008) WEEE flow and mitigating measures in China. Waste Manag Res 28(9):1589–1597
Flapper SDP, Van Nunen JAEE, Wassenhove LNV (2005) Managing closed-loop supply chains. Springer, New York
Rogers D, Tibben-Lembke R (2001) An examination of reverse logistics practices. J Bus Logist 22(2):129–148
Stock JR (2001) The 7 deadly sins of reverse logistics. Mater Handl Manag 56(3):5–11
Prahinski C, Kocabasoglu C (2006) Empirical research opportunities in reverse supply chains. Omega—Int J Manag Sci 34(6):519–532
Lai KH, Wu SJ, Wong CWY (2013) Did reverse logistics hit the triple bottom line of Chinese manufacturers. Int J Prod Econ
Heidrich O, Harvey J, Tollin N (2009) Stakeholder analysis for industrial waste management systems. Waste Manag Res 29(2):965–973
Sarkis J, Dijkshoorn J (2007) Relationships between solid waste management performance and environmental practice adoption in Welsh small and medium-sized enterprises (SMEs). Int J Prod Res 45(21):4989–5015
Souza K (2013) Retail returns, reverse logistics ramp up for the holidays. Available from http://www.thecitywire.com/node/29994#.VFCneTSUeYA
Gomez F, Guzman JI, Tilton JE (2007) Copper recycling and scrap availability. Resour Policy 32(4):183–190
Thomas VM (2003) Product self-management: evolution in recycling and reuse. Environ Sci Technol 37(23):5297–5302
McKinnon A, Browne M, Whiteing A (2012) Improving the Environmental Sustainability of Logistics, 2nd edn. Kogan Page, London, GBR
Beamon BM, Fernandes C (2004) Supply-chain network configuration for product recovery. Prod Plan Control 15(3):270–281
Sasikumar P, Kannan G, Haq AN (2010) A multi-echelon reverse logistics network design for product recovery—A case of truck tire remanufacturing. Int J Adv Manuf Technol 49(9):1223–1234
Daoud Ait-Kadi MC, Marcotte S, Riopel D (2012) Sustainable reverse logistics network. Wiley, Hoboken, US
Bin Zhang ZW, Lai K (forthcoming) Does industrial waste reuse bring dual benefits of economic growth and carbon emission reduction?—Evidence of incorporating the indirect effect of economic growth in China. J Ind Ecol
Tudor T, Adam E, Bates M (2007) Drivers and limitations for the successful development and functioning of EIPs (eco-industrial parks): a literature review. Ecolog Econ 61(2):199–207
Zhu Q, Sarkis J, Lai K (2014) Supply chain-based barriers for truck-engine remanufacturing in China. Trans Res Part E. 68:103–117
Melnyk SA, Sroufe RP, Calantone R (2003) Assessing the impact of environmental management systems on corporate and environmental performance. J Oper Manag 21(3):329–351
Krikke H, Blanc Il, Velde Svd (2004) Product modularity and the design of closed-loop supply chains. Calif Manag Rev 46(2):23–39
Kainuma Y, Tawara N (2006) A multiple attribute utility theory approach to lean and green supply chain management. Int J Prod Econ 101(11):99–108
Seitz MA, Peattie K (2004) Meeting the closed-loop challenge: The case of remanufacturing. Calif Manag Rev 46(2):74–89
Sbihi A, RW Eglese (2007) Combinatorial optimization and green logistics. 4OR 5:99–106
Toffel MW (2004) Strategic management of product recovery. Calif Manag Rev 46(2):120–141
Chung C-J, Wee H-M (2008) Green-component life-cycle value on design and reverse manufacturing in semi-closed supply chain. Int J Prod Econ 113(2):528–545
Greener Design Staff (2009) Patagonia’s clothing recycling program: lessons learned, challenge ahead. Greener Design
Miemczyk J (2008) An exploration of institutional constraints on developing end-of-life product recovery capabilities. Int J Prod Econ 115(2):272–282
Iyer AV, Bergen ME (1997) Quick response in manufacturer retailer channels. Manag Sci 43(3):559–570
Zhu QH, Sarkis J, Lai K-H (2008) Confirmation of a measurement model for green supply chain management practices implementation. Int J Prod Econ 111(2):261–273
Baumann H, Boons F, Bragd A (2002) Mapping the green product development field: engineering, policy, and business perspectives. J Clean Prod 1(4):409–425
Savaskan RC, Bhattacharya SH, Van Wassenhove LN (2004) Closed-loop supply chain models with product remanufacturing. Manag Sci 50(2):239–252
Savaskan RC, Van Wassenhove LN (2006) Reverse channel design: the case of competing retailers. Manag Sci 52(1):1–14
Sroufe R (2003) Effects of environmental management systems on environmental management practices and operations. Prod Oper Manag 12:416–431
Wong CWY et al (2012) The roles of stakeholder support and procedure-oriented management on asset recovery. Int J Prod Econ 135(2):584–594
Sousa R, Voss CA (2002) Quality management re-visited: a reflective review and agenda for future research. J Oper Manag 20(1):91–109
Buzzelli DT (1991) Time to structure an environmental policy strategy. J Bus Strategy 12(2):17–20
Brophy M (ed) (1996) The essential characteristics of an environmental policy. In: Welford R (ed) Corporate environmental management: systems and strategies. Earthscan, London, pp 92–103
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 The Author(s)
About this chapter
Cite this chapter
Wong, C.W.Y., Lai, Kh., Lun, Y.H.V., Cheng, T.C.E. (2016). Closed Loop Supply Chain. In: Environmental Management. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-23681-0_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-23681-0_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23680-3
Online ISBN: 978-3-319-23681-0
eBook Packages: EngineeringEngineering (R0)