Next Generation Sensors and Systems pp 221-233

Part of the Smart Sensors, Measurement and Instrumentation book series (SSMI, volume 16)

Real-Time Monitoring of Meat Drying Process Using Electromagnetic Wave Sensors

Chapter

Abstract

There are currently limited options for the meat producers for monitoring the water content of their products as they are processed or cured. Most existing methodologies are destructive, or require the use of probes which touch or penetrate the meat and lead to issues of contamination and damage. Thus, the aim of this investigation is to use an electromagnetic (EM) wave sensor to monitor the meat drying process and determine its suitability as a non-destructive and non-contact technique. The sensor has been modelled using High Frequency Structure Simulation Software (HFSS) and then constructed. Experimental work was conducted involving measurement of meat weight and EM signature (namely the S11 parameter in the frequency range 1–6 GHz) over a period of approximately 1 week, with measurements recorded every hour. The change in EM signature and weight loss has been analysed and correlations drawn from the resultant data. The results demonstrate a strong relationship between the S11 measurement and weight loss of the meat sample (R2 = 0.8973), and it is proposed that this could be used as the basis for future industrial application for measuring meat products during drying processes, such as those used in curing.

Keywords

Dry-curing Electromagnetic wave Non-invasive Sensor Real-time meat analysis 

References

  1. 1.
    W. Verbeke, Consumer attitudes and communication challenges for agro-food technologies. Agro Food Ind. Hi-Tech 22(5), 34–36 (2011)MathSciNetGoogle Scholar
  2. 2.
    W. Verbeke, L. Van Wezemael, M.D. de Barcellos, J.O. Kügler, J.-F. Hocquette, Ø. Ueland, K.G. Grunert, European beef consumers’ interest in a beef eating-quality guarantee Insights from a qualitative study in four EU countries. Appetite 54(2), 289–296 (2010)CrossRefGoogle Scholar
  3. 3.
    K.G. Grunert, Future trends and consumer lifestyles with regard to meat consumption. Meat Sci. 74(1), 149–160 (2006)CrossRefGoogle Scholar
  4. 4.
    J.L. Damez, S. Clerjon, Quantifying and predicting meat and meat products quality attributes using electromagnetic waves: an overview. Meat Sci. 95(4), 879–896 (2013)CrossRefGoogle Scholar
  5. 5.
    G. Rentfrow, R. Chaplin, S.P. Suman, Technology of dry-cured ham production: Science enhancing artGoogle Scholar
  6. 6.
    SWISS MEAT, Production of Meat Specialties (2014), http://www.schweizerfleisch.ch/en/swiss-meat/handling/production-of-meat-specialties/. Accessed: 18 May 2014
  7. 7.
    M. Adous, P. Quéffélec, L. Laguerre, Coaxial/cylindrical transition line for broadband permittivity measurement of civil engineering materials. Meas. Sci. Technol. 17(8), 2241–2246 (2006)CrossRefGoogle Scholar
  8. 8.
    B. Goy, P. Martin, J.-M. Leban, The measurement of wood density by microwave sensor. Holz als Roh- und Werkst. 50(4), 163–166 (1992)CrossRefGoogle Scholar
  9. 9.
    L. Gradinarsky, H. Brage, B. Lagerholm, I.N. Björn, S. Folestad, In situ monitoring and control of moisture content in pharmaceutical powder processes using an open-ended coaxial probe. Meas. Sci. Technol. 17(7), 1847–1853 (2006)CrossRefGoogle Scholar
  10. 10.
    O. Korostynska, A. Mason, M. Ortoneda-Pedrola, A. Al-Shamma’a, Electromagnetic wave sensing of NO3 and COD concentrations for real-time environmental and industrial monitoring. Sens. Actuat. B Chem. 198, 49–54 (2014)Google Scholar
  11. 11.
    O. Korostynska, M. Ortoneda-Pedrola, a Mason, a I. Al-Shamma’a, Flexible electromagnetic wave sensor operating at GHz frequencies for instantaneous concentration measurements of NaCl, KCl, MnCl2 and CuCl solutions. Meas. Sci. Technol. 25(6), 065105 (2014)Google Scholar
  12. 12.
    A.I. Al-Shamma’a, O. Korostynska, A. Mason, Microwave sensors for the non-invasive monitoring of industrial and medical applications. Sens. Rev. 34, 182–191 (2014)Google Scholar
  13. 13.
    M.F. J.H. Goh, A. Mason, O. Korostynska, A.I. Al-Shamma’a, P. Browning, Real-time monitoring of bodily fluids using a novel electromagnetic wave sensor. J. Public Heal. Front. 2(4) 201–206 (2013)Google Scholar
  14. 14.
    A. Mason, O. Korostynska, M. Ortoneda-Pedrola, A. Shaw, A. Al-Shamma’a, A resonant co-planar sensor at microwave frequencies for biomedical applications. Sens. Actuat. A Phys. 202, 170–175 (2013)Google Scholar
  15. 15.
    J.H. Goh, A. Mason, M. Field, P. Browning, A. Al-Shamma’a, Using a microwave sensor as an online indicator of neurological impairment during surgical procedures. Key Eng. Mater. 543, 368–372 (2013)Google Scholar
  16. 16.
    A.I. Al-Shamma’a, B.M. Abdullah, J.D. Cullen, O. Korostynska, A. Mason, Assessing water-holding capacity (WHC) of meat using microwave spectroscopy. Sens. Technol. Curr. Status Futur. Trends I, 7, 117–140 (2014)Google Scholar
  17. 17.
    A.I. Al-Shamma’a, S.G. Bjarnadottir, K. Lunde, O. Alvseike, A. Mason, Assessing quality parameters in dry-cured ham using microwave spectroscopy. Meat Sci (in-Press, 2015)Google Scholar
  18. 18.
    S. Clerjon, J.L. Damez, Microwave sensing for an objective evaluation of meat ageing. J. Food Eng. 94(3–4), 379–389 (2009)CrossRefGoogle Scholar
  19. 19.
    F. Ray, Meat curing. Oklahoma State University (2014), http://pods.dasnr.okstate.edu/docushare/dsweb/Get/Document-2055/ANSI-3994web.pdf. Accessed 19 May 2014
  20. 20.
    N.G. Marriott, P.P. Graham, V.C. Extension, Some Solutions to Difficulties of Home-curing Pork. Virginia Cooperative Extension (2000)Google Scholar
  21. 21.
    B.A. Constantine, Antennas Theory. Analysis and Design, 3rd edn. (Wiley, Hoboken, 2005)Google Scholar

Copyright information

© Springer International Publishing Switzerland 2016

Authors and Affiliations

  1. 1.School of Built EnvironmentLiverpool John Moores UniversityLiverpoolUK

Personalised recommendations