Abstract
Due to expansion of the micro- and nanocomposites application for manufacturing machine components and friction units, the problem of calculation methods for determination of deformability, strength and wear resistance parameters of gear drives made of essentially inhomogeneous disperse-reinforced materials is addressed. The potentialities of analytical and numerical methods are analyzed. The original three-level (micro, meso- and macro) method for tribomechanical parameters optimization of the gears by controlling material reinforcing is presented. Through specific examples, the potentialities of polymer reinforcement for obtaining functional materials for gears which allow for an increase in damping capability, shape stability and life time of the gear driven by the criterion of wear and bending strength have been studied.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Frolov KV (2008) Contemporary tribology: totals and perspectives. Publishing House, LKI (in Russian)
Kragel’sky IV, Dobychin MN, Kombalov VS (1977) Osnovy raschetov na trenie i iznos (Basis of calculations on friction and wear). Publishing House, Mashinostroenie, Moscow (in Russian)
Hebda M, Chichinadze AV (Ed) Reference book on triboengineering, vol 3. Publishing House, Mashinostroenie, Moscow (1989) (in Russian)
Goryacheva IG (2001) Mechanics of friction interaction. Publishing House, Nauka (in Russian)
Johnson KL (1987) Contact mechanics. Cambridge University Press, Cambridge; Publishing House, Mir (1989)
Goldfarb VI, Lunin SV, Trubachov ES (2004) Direct digital simulation for gears, vol 1. Izhevsk
Shil’ko SV, Petrokovets EM, Semenova TV (2001) Estimation of contact stiffness of coatings: comparison of calculation methods. Part 1. J Frict Wear 22:6–12
Sytar VI, Kuzyaev IM, Burya AI et al (2004) Optimization of the triboengineering characteristics of a phenylon-based composition. J Frict Wear 25:219–222
Shil’ko SV, Starzhinsky VE (1993) Prediction of wear resistance of gearing with wheels made of reinforced composites. J Frict Wear 14:7–13
Shil’ko SV, Starzhinsky VE, Petrokovets EM, Chernous DA (2013) Two-level calculation method for tribojoints made of disperse-reinforced composites. Part 1. J Frict Wear 34:65–69
Shil’ko SV, Starzhinsky VE, Petrokovets EM, Chernous DA (2014) Two-level calculation method for tribojoints made of disperse-reinforced composites. Part 2. J Frict Wear 35:47–55
Starzhinsky VE, Shalobaev EV, Shil’ko SV et al (2012) Elements of device drives. In: Pleskachevskii YM (ed) Calculation, design, technologies. Publishing House, Belaruskaya Navuka (in Russian)
Fudzii T, Dzako M (1982) Fracture mechanics of composite materials. Mir, Publishing House (in Russian)
Crouch SL, Starfield AMÂ (1987) Boundary element methods in solid mechanics. Publishing House: George Allen and Unwin, London
Christensen R (1979) Mechanics of composite materials. Wiley, New York; Publishing House, Mir (1982)
Kravchuk AS, Maiboroda VP, Urzhumtsev YuS (1985) Mechanics of polymer and composite materials. Nauka, Publishing House (in Russian)
Shil’ko SV, Chernous DA, Panin SV (2012) Mesomechanical analysis of polymer composites reinforced by short fibers with taking into account an interphase layer. Mech Compos Mater 48:171–178
Shil’ko SV, Chernous DA, Panin SV (2013) The modified Takayanagi model of deformation for dispersed-filled composites. Part. 2. Determination of elastic moduli and yield limit with taking into account the interface layer. J Compos Mater Struct 19:181–195 (in Russian)
Shil’ko SV et al (2002) Simulation of contact interaction in MEMS conjugations. In: Bulletin Gomel State Technological University named by P.O. Suchoy, vol 3, pp 31–38 (in Russian)
Belyi VA, Starzhinsky VE, Scherbakov SV (1981) Metal-polymer gear drives. Publishing House, Nauka i Technika (in Russian)
Blagodarnyi VM (1985) Wear and strength computation of fine-module gear drives. Publishing House, Mashinostroenie (in Russian)
Konyok DA, Wojciechowski KW, Pleskachevsky YM, Shil’ko SV (2004) Materials with negative Poisson’s ratio (The review). J Compos Mater Struct 10:35–69 (in Russian)
Muller R (1972) Maschinenteile aus Kunststoff. Ausbau 8:491–501
Shandalov KS (1968) Influence of teeth flexibility on contact ratio. In: Kolchin NI (ed) Gear and worm drives. Publishing House, Mashinostroenie, pp 90–101 (in Russian)
Koltunov MA (1976) Creep and relaxation. Publishing House, Vysshaya Shkola (in Russian)
ANSYS Revision 10–14
Gavrilenko SL, Shil’ko SV (2014) Identification of Prony linear viscoelastic model on the results of test at relaxation under compression. In: Composite book, Theoretical and applied mechanics, vol 29, pp 219–223 (in Russian)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Shil’ko, S., Starzhinsky, V., Petrokovets, E. (2016). Methods and Results of Composite Gears Design. In: Goldfarb, V., Barmina, N. (eds) Theory and Practice of Gearing and Transmissions. Mechanisms and Machine Science, vol 34. Springer, Cham. https://doi.org/10.1007/978-3-319-19740-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-19740-1_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-19739-5
Online ISBN: 978-3-319-19740-1
eBook Packages: EngineeringEngineering (R0)