Abstract
To describe the different plastic moduli of the metal materials presented in the monotonic and cyclic deformations, a new nonlinear kinematic hardening rule is proposed by modifying the Chaboche’s one (Chaboche 1989). In the proposed rule, the back stress is assumed to be decomposed into three components as done by Chaboche (1989), but the linear hardening and dynamic recovery terms of each back stress component are further divided into two parts, respectively, and a part in each of them is only activated when the reverse loading occurs so that the cyclic stress-strain hysteresis loops can be predicted more accurately; moreover, a rachetting coefficient is introduced into one part of dynamic recovery term to describe the ratchetting. The proposed rule can be reduced to the Chaboche’s one under the monotonic loading conditions, or by setting some material parameters as zero. Finally, the proposed model is verified by comparing the predicted results with corresponding experimental ones. It is seen that the predicted results are in good agreement with the corresponding experimental ones.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abdel-Karim M (2009) Modified kinematic hardening rules for simulations of ratchetting. Int J Plast 25:1560–1587
Armstrong P, Frederick C (1966) A mathematical representation of the multiaxial Bauschinger effect. Technical Report RD/B/N731, Central Electricity Generating Board, Berkeley, UK
Bai N, Chen X (2009) A new unified constitutive model with short-and-long-range back stress for lead-free solders of Sn-3Ag-0.5Cu and Sn-0.7Cu. Int J Plast 25:2181–2203
Bari S, Hassan T (2000) Anatomy of coupled constitutive models for ratcheting simulation. Int J Plast 16:381–409
Bari S, Hassan T (2001) Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation. Int J Plast 17:885–905
Bari S, Hassan T (2002) An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int J Plast 18(7):873–894
Chaboche J (1989) Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int J Plast 5(3):247–302
Chaboche J (1991) On some modifications of kinematic hardening to improve the description of ratchetting effects. Int J Plast 7(7):661–678
Chaboche J (2008) A review of some plasticity and viscoplasticity constitutive theories. Int J Plast 24(10):1642–1693
Dong Y, Kang G, Yu C (2014) A dislocation-based cyclic polycrystalline visco-plastic constitutive model for ratchetting of metals with face-centered cubic crystal structure. Comput Mater Sci 91(10):75–82
Gaudin C, Feaugas X (2004) Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses. Acta Materialia 52:3097–3110
Kang G (2004) A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation. Mech Mater 36:299–312
Kang G (2008) Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application. Int J Fatigue 30:1448–1472
Kang G, Gao Q (2002) Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations. Mech Mater 34:809–820
Kang G, Gao Q, Yang X (2002) A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratchetting of SS304 stainless steel at room temperature. Mech Mater 34:521–531
Mizuno M, Mima Y, Abdel-Karim M, Ohno N (2000) Uniaxial ratchetting of 316FR steel at room temperature—Part I: experiments. J Eng Mater Technol 122:29–34
Ohno N (1997) Recent progress in constitutive modeling for ratchetting. Mater Sci Res Int 3(1):1–9
Ohno N, Abdel-Karim M (1990) Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity. Appl Mech Rev 43:283–295
Ohno and Abdel-Karim(2000)]Ohnokarim2000 Ohno N, Abdel-Karim M (2000) Uniaxial ratcheting of 316 fr steel at room temperature. Part II: constitutive modeling and simulation. J Eng Mater Technol 122:35–41
Ohno N, Wang J (1991) Transformation of a nonlinear kinematic hardening rule to a multisurface form under isothermal and nonisothermal conditions. Int J Plast 7:879–891
Ohno N, Wang J (1993) Kinematic hardening rules with critical state of dynamic recovery, Parts I and II. Int J Plast 9:375–403
Zhu Y, Kang G, Kan Q, Bruhns O (2014) Logarithmic stress rate based constitutive model for cyclic loading in finite plasticity. Int J Plast 54:34–55
Acknowledgments
Financial supports by the National Natural Science Foundation of China (11025210), the project for Sichuan Provincial Youth Science and Technology Innovation Team (2013, China), the 2013 Doctoral Innovation Funds of Southwest Jiaotong University and the Fundamental Research Funds for the Central Universities are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Zhu, Y., Kang, G., Kan, Q. (2015). A New Kinematic Hardening Rule Describing Different Plastic Moduli in Monotonic and Cyclic Deformations. In: Altenbach, H., Matsuda, T., Okumura, D. (eds) From Creep Damage Mechanics to Homogenization Methods. Advanced Structured Materials, vol 64. Springer, Cham. https://doi.org/10.1007/978-3-319-19440-0_27
Download citation
DOI: https://doi.org/10.1007/978-3-319-19440-0_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-19439-4
Online ISBN: 978-3-319-19440-0
eBook Packages: EngineeringEngineering (R0)