Advertisement

Grind-Hardening Process Modelling

  • Konstantinos SalonitisEmail author
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

Grind-hardening process is a complex hybrid process integrating heat treatment process with high material rate grinding. The modelling of the process thus is quite complex and a number of aspects need to be considered. The present chapter presents a holistic model able to predict the grinding forces, temperature distribution, metallurgical changes, surface hardness and residual stresses. The model is composed of a number of sub-models that are also verified experimentally.

Keywords

Residual Stress Workpiece Material Workpiece Surface Contact Length Coolant Fluid 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Toenshoff HK, Peters J, Inasaki I, Paul T (1992) Modelling and simulation of grinding processes. CIRP Ann Manuf Technol 41(2):677–688CrossRefGoogle Scholar
  2. 2.
    Salonitis K, Stavropoulos P, Kolios A (2014) External Grind Hardening Forces Modelling and Experimentation. Int J Adv Manuf Technol 70(1–4):523–530CrossRefGoogle Scholar
  3. 3.
    Malkin S (1989) Grinding technology: theory and applications of machining with abrasives. Ellis Horwood, ChichesterGoogle Scholar
  4. 4.
    Malkin S, Cook NH (1971) The wear of grinding wheels. Part 1. Attritious wear. ASME J Eng Ind 93:1120–1128CrossRefGoogle Scholar
  5. 5.
    Hou ZB, Komanduri R (2003) On the mechanics of the grinding process—Part I. Stochastic nature of the grinding process. Int J Mach Tools Manuf 43:1579–1593CrossRefGoogle Scholar
  6. 6.
    Kannapan S, Malkin S (1972) Effects of grain size and operating parameters on the mechanics of grinding. ASME J Eng Ind 94:833CrossRefGoogle Scholar
  7. 7.
    Lichun L, Jizai F, Peklenik J (1980) A study of grinding force mathematical model. CIRP Ann Manuf Technol 29(1):245–249CrossRefGoogle Scholar
  8. 8.
    Mishra VK, Salonitis K (2013) Empirical estimation of grinding specific forces and energy based on a modified werner grinding model. Procedia CIRP 8:287–292CrossRefGoogle Scholar
  9. 9.
    Lavine AS (1991) Thermal aspects of grinding: the effect of heat generation at the shear planes. CIRP Ann Manuf Technol 40(1):343–345CrossRefGoogle Scholar
  10. 10.
    Lavine AS (2000) An exact solution for surface temperature in down grinding. Int J Heat Mass Transf 43:4447–4456CrossRefzbMATHGoogle Scholar
  11. 11.
    Salonitis K, Chryssolouris G (2006) Cooling in grind hardening operations. Int J Adv Manuf Technol 33:285–297CrossRefGoogle Scholar
  12. 12.
    Chryssolouris G, Tsirbas K, Salonitis K (2005) An analytical, numerical and experimental approach to grind hardening. SME J Manuf Process 7(1):1–9CrossRefGoogle Scholar
  13. 13.
    Rowe WB, Morgan MN, Allanson DA (1991) An advance in the modelling of thermal effects in the grinding process. CIRP Ann Manuf Technol 40(1):339–342CrossRefGoogle Scholar
  14. 14.
    Rowe WB, Morgan MN (1993) The effect of deformation on the contact area in grinding. CIRP Ann Manuf Technol 42(1):409–412CrossRefGoogle Scholar
  15. 15.
    Zhou ZX, Van Lutterwelt CA (1992) The real contact length between grinding wheel and workpiece—a new concept and a new measuring method. CIRP Ann Manuf Technol 41(1):387–391CrossRefGoogle Scholar
  16. 16.
    Lavine AS, Malkin S, Jen TC (1989) Thermal aspects of grinding with CBN wheels. CIRP Ann Manuf Technol 38(1):557–560CrossRefGoogle Scholar
  17. 17.
    Rowe WB, Black SCE, Mills B, Qi HS, Morgan MN (1995) Experimental investigation of heat transfer in grinding. CIRP Ann Manuf Technol 44(1):329–332CrossRefGoogle Scholar
  18. 18.
    Rowe WB, Morgan MN, Black SCE, Mills B (1996) A simplified approach to control of thermal damage in grinding. CIRP Ann Manuf Technol 45(1):299–302CrossRefGoogle Scholar
  19. 19.
    Rowe WB, Black SCE, Mills B (1996) Temperature control in CBN grinding. Int J Adv Manuf Technol 12:387–392CrossRefGoogle Scholar
  20. 20.
    Rowe WB, Morgan MN, Black SCE (1998) Validation of thermal properties in grinding. CIRP Ann Manuf Technol 47(1):275–279CrossRefGoogle Scholar
  21. 21.
    Guo C, Malkin S (1992) Heat transfer in grinding. J Mater Process Manuf Sci 1:16–27Google Scholar
  22. 22.
    Guo C, Malkin S (1994) Analytical and experimental investigation of burnout in creep-feed grinding. CIRP Ann Manuf Technol 43(1):283–286CrossRefGoogle Scholar
  23. 23.
    Guo C, Malkin S (1996) Effectiveness of cooling in grinding. Trans North Am Manuf Res Inst SME 1996 (NAMRI/SME) XXIV:111–116Google Scholar
  24. 24.
    Guo C, Malkin S (2000) Energy partition and cooling during grinding. SME J Manuf Process 2(3):151–157CrossRefGoogle Scholar
  25. 25.
    Jin T, Cai GQ, Jeong HD, Kim NK (2001) Study on heat transfer in super-high-speed-grinding: energy partition to the workpiece in HEDG. J Mater Process Technol 111:261–264CrossRefGoogle Scholar
  26. 26.
    Toenshoff HK, Brinksmeier E, Choi H-Z (1987) Abrasives and their influence on forces, temperatures, and surface. In: Proceedings of the 15th North American manufacturing research conference, pp 70–89Google Scholar
  27. 27.
    Rowe WB, Pettit JA, Boyle A, Moruzzi JL (1988) Avoidance of thermal damage in grinding and prediction of the damage threshold. CIRP Ann Manuf Technol 37(1):327–330CrossRefGoogle Scholar
  28. 28.
    Salonitis K, Chryssolouris G (2007) Thermal analysis of grind-hardening process. Int J Manuf Technol Manage 12(1/2/3):72–92Google Scholar
  29. 29.
    Salonitis K, Chondros T, Chryssolouris G (2008) Grinding wheel effect in the grind-hardening process. Int J Adv Manuf Technol 38(1–2):48–58CrossRefGoogle Scholar
  30. 30.
    Rowe WB (2001) Thermal analysis of high efficiency deep grinding. Int J Mach Tools Manuf 41:1–19CrossRefGoogle Scholar
  31. 31.
    Rowe WB, Jin T (2001) Temperatures in high efficiency deep grinding (HEDG). CIRP Ann Manuf Technol 50(1):205–208CrossRefGoogle Scholar
  32. 32.
    Hahn RS (1962) On the nature of the grinding process. In: Proceedings of the 3rd machine tool design and research conference, pp 129–154Google Scholar
  33. 33.
    Kim NK, Guo C, Malkin S (1997) Heat flux distribution and energy partition in creep-feed grinding. CIRP Ann Manuf Technol 46(1):227–232CrossRefGoogle Scholar
  34. 34.
    Jin T, Stephenson DJ (2003) Investigation of the heat partitioning in high efficiency deep grinding. Int J Mach Tools Manuf 43:1129–1134CrossRefGoogle Scholar
  35. 35.
    Chang CC, Szeri AZ (1998) A thermal analysis of grinding. Wear 216:77–86CrossRefGoogle Scholar
  36. 36.
    Chiu N, Malkin S (1993) Computer simulation for cylindrical plunge grinding. CIRP Ann Manuf Technol 42(1):383–387CrossRefGoogle Scholar
  37. 37.
    Eda H, Ohmura E, Yamauchi S (1993) Computer visual simulation on structural changes of steel in grinding process and experimental verification. CIRP Ann Manuf Technol 42(1):389–392CrossRefGoogle Scholar
  38. 38.
    Lavine AS (1988) A simple model for convective cooling during the grinding process. J Eng Ind 110:1–6CrossRefGoogle Scholar
  39. 39.
    Snoeys R, Maris M, Peters J (1978) Thermally induced damage in grinding. CIRP Ann Manuf Technol 27:571–579Google Scholar
  40. 40.
    Carslaw HS, Jaeger JC (1959) Conduction of heat in solids. Oxford University Press, LondonGoogle Scholar
  41. 41.
    Jin T, Cai GQ (2001) Analytical thermal models of oblique moving heat source for deep grinding and cutting. J Manuf Sci Eng 123:185–190CrossRefGoogle Scholar
  42. 42.
    Krauss G (1993) Steels: heat treatment and processing principles, ASM International, Materials ParkGoogle Scholar
  43. 43.
    Liedtke D, Jonsson R (1996) Warmebehandlung. Expert VerlagGoogle Scholar
  44. 44.
    Liedtke D, Jonsson R (1954) Atlas zur Waermebehandlung der Stahle, 1st edn. Verlag stahleisen mbH, DuesseldorfGoogle Scholar
  45. 45.
    Koistinen DP, Marburger RE (1959) A general equation prescribing the extent of the Austenite-Martensite transformation in Pure Iron-Carbon alloys and plain Carbon steels. Acta Metall 7:59–60CrossRefGoogle Scholar
  46. 46.
    Pollack H (1988) Materials science and metallurgy, 4th edn. Prentice-Hall, Englewood CliffsGoogle Scholar
  47. 47.
    Umbrello D, Ambrogio G, Filice L, Shivpuri G (2008) A hybrid finite element method–artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel. Mater Des 29:873–883CrossRefGoogle Scholar
  48. 48.
    Mahdi M, Zhang L (1999) Applied mechanics in grinding. Part 7: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation. Int J Mach Tools Manuf 39:1285–1298CrossRefGoogle Scholar
  49. 49.
    Mahdi M, Zhang LC (1997) Applied mechanics in grinding-V. Thermal residual stresses. Int J Mach Tools Manuf 37:619–633CrossRefGoogle Scholar
  50. 50.
    Salonitis K (2014) On surface grind hardening induced residual stresses. Procedia CIRP 13:264–269CrossRefGoogle Scholar
  51. 51.
    Salonitis K (2006) A methodology for the prediction of the hardness distribution and the hardness penetration depth caused by grind-hardening process. Ph.D. dissertation, University of Patras, Patras, GreeceGoogle Scholar
  52. 52.
    Salonitis K, Stavropoulos P, Stournaras A, Chryssolouris G (2007) Finite element modeling of grind hardening process. In: Proceedings of 10th CIRP International Workshop on Modeling of Machining Operations, pp 117–123Google Scholar

Copyright information

© The Author(s) 2015

Authors and Affiliations

  1. 1.Manufacturing Department, School of Aerospace, Transport and ManufacturingCranfield UniversityCranfieldBedfordshire, UK

Personalised recommendations