Abstract
Development of additive technologies and biocompatible materials facilitated their use in the custom-made implants manufacture. Verification of custom-made implants manufactured using the additive manufacturing technologies is the key task to be fulfilled prior to the clinical application of an implant. It consists of parameters verification within individual steps, from a software design, through manufacturing, surface finishing, up to finalization of a medical product. The article presents possible uses of a 3D printing and the computed tomography (Metrotom 1500, Carl Zeiss, Germany) for the verification of selected parameters of customized implants manufactured using the Direct Metal Laser Sintering (DMLS) technology with the EOSINT M280 equipment (EOS GmbH, Germany) from the biocompatible titanium alloy Ti-6Al-4V (Grade 5). The article describes the possibilities of the computed tomography use in the verification of implant shapes and external dimensions, as well as internal structure. The internal structure means the implant porosity assessment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hudák, R., Živčák, J., Tóth, T., Majerník, J., Lisý, M.: Evaluation of custom-made implants using industrial computed tomography. In: Digital Technologies 2014: The 10th International Conference, 9–11 July 2014, Zilina, Piscataway, IEEE, pp. 83–87 (2014). ISBN 978-1-4799-3301-3
Tóth, T., Hudák, R.: Computed tomography—its development, principle and image artifacts. Acta Mech. Slovaca. Ro. 17(4), 40–47 (2013). ISSN 1335-2393
Kruth, J.P., Bartscherb, M., Carmignatoc, S., Schmittd, R., De Chiffree, L., Weckenmannf, A.: Computed tomography for dimensional metrology. CIRP Ann. Manufact. Technol. 60(2), 821–842 (2011). http://www.sciencedirect.com/science/article/pii/S0007850611002083
Léonard, F., Tammas-Williams, S., Prangnell, P., Todd, I., Withers, P.: Assessment by X-ray CT of the effects of geometry and build direction on defects in titanium ALM parts. In: Conference on Industrial Computed Tomography (ICT), 19–21 Sept 2012, Wels, Austria (2012). http://www.ndt.net/article/ctc2012/papers/91.pdf
Slotwinski, J.A., Garboczi, E.J.: Porosity of additive manufacturing parts for process monitoring. In: 40th Review of Progress in Quantitative Non-Destructive Evaluation, 22–26 July 2013, Baltimore, MD (2013). http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914546
Slotwinski, J.A.: Additive manufacturing at NIST, the science of digital manufacturing. http://cba.mit.edu/events/13.03.scifab/Slotwinski.pdf (2013). Accessed 7 Mar 2013
Brown, C., Lubell, J., Lipman, R.: Additive Manufacturing Technical Workshop Summary Report (2013)
Girardin, E., Renghini, C., Dyson, J., Calbucci, V., Moroncini, F., Albertini, G.: Characterization of porosity in a laser sintered MMCp using X-ray synchrotron phase contrast microtomography. Mater. Sci. Appl. 2, 1322–1330 (2011)
Drstvensek, I., Hren, N.I., Strojnik, T., Brajlih, T., Valentan, B., Pogacar, V., Hartner, T.Z.: Applications of rapid prototyping in cranio-maxilofacial surgery procedures. Int. J. Biol. Biomed. Eng. Issue http://www.naun.org/main/NAUN/bio/bio-19.pdf
Salmi M.: Medical applications of additive manufacturing in surgery and dental care. Doctoral Disertation, Aalto university (2013). https://aaltodoc.aalto.fi/bitstream/handle/123456789/11854/isbn9789526054964.pdf?-sequence=1
Podshivalov, L., Gomes, C.M., Zocca, A., Guenster, J., Bar-Yoseph, P., Fischer, A.: Design, analysis and additive manufacturing of porous structures for biocompatible micro-scale scaffolds. Proc. CIRP 5, 247–252. ISSN 2212–8271. doi:10.1016/j.procir.2013.01.049
Bauza, M.B., Moylan, S.P., Panas, R.M., Burke, S.C., Martz, H.E., Taylor, J.S., Alexander, P., Knebel, R.H., Bhogaraju, R., O’Connell, M.T., Smokovitz, J.D.: Study of accuracy of parts produced using additive manufacturing. In: 2014 ASPE Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing Berkeley, CA, United States, 13–16 April 2014. http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915785
Matilainen, V.: Benchmarking of laser additive manufacturing process bachelor thesis. Lappeenranta University of Technology (2012). http://www.doria.fi/bitstream/handle/10024/84863/BSc%20Thesis%20Matilainen%20fv.pdf?sequence=1
Acknowledgments
Presented paper was supported by the project Research of New Diagnostic Methods in Invasive Implantology, MSR-3625/2010-11, Stimuli for Research and Development of/( Ministry of Education, Science, Research and Sport of the Slovak Republic and project KEGA 036TUKE-4/2013, Implementation of New Technologies in Design and Fabrication of Implants in Biomedical Engineering and Related Scientific Fields and Creation and promotion of Technologies in diagnostics of components and junctions with computed tomography (lTMS:26220220038) supported by the Research & Development Operational Programme funded by the ERDF.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Hudák, R., Živčák, J., Tóth, T., Majerník, J., Lisý, M. (2016). Usage of Industrial Computed Tomography for Evaluation of Custom-Made Implants. In: Bris, R., Majernik, J., Pancerz, K., Zaitseva, E. (eds) Applications of Computational Intelligence in Biomedical Technology. Studies in Computational Intelligence, vol 606. Springer, Cham. https://doi.org/10.1007/978-3-319-19147-8_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-19147-8_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-19146-1
Online ISBN: 978-3-319-19147-8
eBook Packages: EngineeringEngineering (R0)