Abstract
The boundary layer separation on the upper surface of airfoils results in a decrease of the aerodynamic performances accompanied by vibrations and noise. Passive flow control with vortex generators (VGs) is a simple solution to delay or eliminate the flow separation. Lin’s generators V-shaped are among the most efficient and allow a significant increase in lift associated with a drag reduction when their height is less than the boundary layer thickness. The present work concerns the effectiveness of a new VGs configuration, delta wing shape, placed on line on the suction surface of a curved profile (NACA 4412). The experimental study conducted in a wind tunnel at Reynolds number equals to 2.5 105 shows improved lift with an increase of 20% and one degree delay of the stall incidence. The study also highlights the VGs geometrical parameters influence such as their height, their position from the leading edge, their spacing and their apex angle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Gad-el-Hak, M., Pollard, A., Bonnet, J.P.: Flow control: fundamentals and practices. Springer, Heidelberg (1998)
Lin, J.C.: Control of turbulent boundary-layer separation using micro-vortex generators. AIAA paper, 3404 (1999)
Bak, C., Fuglsang, P., Johansen, J., Antoniou, I.: Wind tunnel tests of the NACA 63-415 and a modified NACA 63-415 airfoil. Risø National Laboratory, Roskilde, Denmark (2000)
Godard, G., Stanislas, M.: Control of a decelerating boundary layer. Part 1: Optimization of passive vortex generators. Aerospace Science and Technology 10(3), 181–191 (2006)
Werlé, H.: Sur l’éclatement des tourbillons. Office National d’Études et de Recherches Aéronautiques (1971)
Le Ray, M., Deroyon, J.P., Deroyon, M.J., Minair, C.: Critères angulaires de stabilité d’un tourbillon hélicoïdal ou d’un couple de tourbillons rectilignes, rôle des angles privilégiés dans l’optimisation des ailes, voiles, coques des avions et des navires. Bulletin de l’Association technique maritime et aéronautique, 511–529 (1985)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Tebbiche, H., Boutoudj, M.S. (2015). Passive Control on the NACA 4412 Airfoil and Effects on the Lift. In: Chouchane, M., Fakhfakh, T., Daly, H., Aifaoui, N., Chaari, F. (eds) Design and Modeling of Mechanical Systems - II. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-17527-0_77
Download citation
DOI: https://doi.org/10.1007/978-3-319-17527-0_77
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17526-3
Online ISBN: 978-3-319-17527-0
eBook Packages: EngineeringEngineering (R0)