Abstract
This paper describes a design-led exploratory scoping study into the potential use of an industry standard dielectric electroactive polymer (DEAP) sensor for applications in assistive healthcare. The focus of this activity was to explore the physical format and integration of soft materials and sensor combinations with properties that afford an opportunity for accurate and unobtrusive real time body mapping and monitoring. The work involved a series of practical investigations into the capacitance changes in the sensor brought on by deformation through different ways of stretching. The dielectric sensors were selected as a direct mapping tool against the body based on the similarity of the stretch qualities of both the sensor and human skin and muscle resulting in a prototype vest for real time breathing monitoring through sensing thoracic movement. This involved modification of the standard sensors and handcrafting bespoke sensors to map critically relevant areas of the thorax.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Oliver, R., Toomey, A.: A physical basis for ambient intelligence. In: Gabrielli, S., Elias, D., Kahol, K. (eds.) AmBI-SYS 2011. LNICST, vol. 70, pp. 1–11. Springer, Heidelberg (2011)
Malins, J.P., et al.: Future Textile Visions: Smart Textiles for Health and Wellness. Robert Gordon University, Aberdeen (2012)
Ochoa, M., Rahim, R., Babak, Z.: Flexible Sensors for Chronic Wound Management. 1–1 (2013)
Rakibet, O.O., et al.: Epidermal passive strain gauge technologies for assisted technologies. IEEE Antennas Wirel. Propag. Lett. 13(1), 814–817 (2014)
Kumar, P.S., et al.: Nanocomposite electrodes for smartphone enabled healthcare garments: e-bra and smart vest. In: International Society for Optics and Photonics SPIE Nanosystems in Engineering + Medicine (2012)
Mattman, C., Amft, O., Harms, H., Troster, G.: Recognizing upper body postures using textile strain sensors. In: 11th IEEE International Symposium Wearable Computers (2007)
Huang, K., et al.: A technology probe of wearable in-home computer-assisted physical therapy. In: Proceedings of the 32nd Annual ACM Conference on Human Factors in Computing Systems. ACM (2014)
Lanata, A., Scilingo, E.P.: Smart textiles: technology and wireless system network applications. In: Autonomous Sensor Networks. Springer, Heidelberg, pp. 127–158 (2013)
Mazilu, S., et al.: GaitAssist: a wearable assistant for gait training and rehabilitation in Parkinson’s disease. In: 2014 IEEE International Conference on Pervasive Computing and Communications Workshops (PERCOM Workshops). IEEE (2014)
Stoppa, M., Chiolerio, A.: Wearable electronics and smart textiles: a critical review. Sensors 14(7), 11957–11992 (2014)
Komuro, N., et al.: Inkjet printed (bio) chemical sensing devices. Anal. Bioanal. Chem. 405(17), 5785–5805 (2013)
Tongrod, N., et al.: Design and development of data glove based on printed polymeric sensors and zigbee networks for human-computer interface. Disabil. Rehabil. Assistive Technol. 8(2), 115–120 (2013)
Rogers, J.A., et al.: Mater. and mechanics for stretchable electronics. Science 327, 1603 (2010). AAAS
Lai, Y.-C., et al.: Stretchable organic memory: toward learnable and digitized stretchable electronic applications. NPG Asia Materials 6(2), e87 (2014)
Yu, Y., Yan, C., Zheng, Z.: Polymer assisted metal deposition (PAMD): a full solution strategy for flexible, stretchable, compressible, and wearable metal conductors. Adv. Mater. 26, 5508–5516 (2014)
Bar-Cohen, Y., Zhang, Q.: Electroactive polymer actuators and sensors. MRS Bull. 33(03), 173–181 (2008)
Ozsecen, M.Y., Mavroidis, C.: Nonlinear force control of dielectric electroactive polymer actuators. In: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics (2010)
Carpi, F., De Rossi, D.: Dielectric elastomer cylindrical actuators: electromechanical modelling and experimental evaluation. Mater. Sci. Eng., C 24(4), 555–562 (2004)
De Rossi, D., et al.: Electroactive fabrics and wearable biomonitoring devices. AUTEX Res. J. 3(4), 180–185 (2003)
Pelrine, R.E., Kornbluh, R.D., Joseph, J.P.: Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation. Sens. Actuators A: Phys. 64(1), 77–85 (1998)
Danfoss Polypower DEAP Material. http://www.polypower.com
Moessinger, H.: Demonstrating the Application of Dielectric Polymer Actuators for Tactile Feedback in a Mobile Consumer Device. Philips Research, Eindhoven (2010)
O’Connor, K.: Lycra: How A Fiber Shaped America. Routledge, New York (2011)
Kuchler, S.: Technological materiality: beyond the dualist paradigm. Theory Cult. Soc. 25, 101–120 (2008)
Wiberg, M., Robles, E.: Computational compositions: aesthetics materials and interaction design. Int. J. Des. 4(2), 67 (2010)
Coelho, M., et al.: Programming reality: from transitive materials to organic user interaces. In: CHI Extended Abstracts on Human Factors in Computing Systems, pp. 4759–4762. ACM press (2009)
Toomey, A., Oliver, R., Tillotson, J.: Bioengineered textiles and nonwovens-the convergence of bio-miniturisation and electroactive conductive polymers for assistive healthcare, portable power and design-led wearable technology. In: WACBE-TBIS Special Symposium (2010)
Sekitani, T., Someya, T.: Stretchable large-area organic electronics. Adv. Mater. 22, 2228–2246 (2010). Wiley
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Toomey, A., Oliver, R., O’Connor, N., Stevenson-Keating, P. (2015). A Design-Led, Materials Based Approach to Human Centered Applications Using Modified Dielectric Electroactive Polymer Sensors. In: Kanjo, E., Trossen, D. (eds) Sensor Systems and Software. S-CUBE 2014. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 143. Springer, Cham. https://doi.org/10.1007/978-3-319-17136-4_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-17136-4_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-17135-7
Online ISBN: 978-3-319-17136-4
eBook Packages: Computer ScienceComputer Science (R0)