Advertisement

A Method for Building a Simple and Applicable Power Inverter

  • Mohamed AbdelatiEmail author
  • Georg Frey
Conference paper
Part of the Springer Proceedings in Energy book series (SPE)

Abstract

In the last few years, people in the Gaza Strip started to rely on power inverters as part of a backup power system due to frequent failure of the mains utility. The simplest backup system consists of a battery, a battery charger, and an inverter. At least one house out of four in the Gaza Strip is equipped with such a system. The inverters’ market is shared by few local and plenty foreign manufactures. Although imported inverters are either cheaper than or functionally superior to locally made ones, the majority of people prefer to utilize the local inverters. This is due to not only encouragement reasons, but also the ease of maintenance. Foreign inverters use to be manufactured with high-tech and state-of-the-art components which do not fit with available resources and expertise. Moreover, due to current political situations, most import and export transactions are neither insured nor time predictable. In this work, design of a viable single phase inverter is addressed. It is low-cost and has an integrated battery charger making it a challenging competitor to present choices. The device functions are controlled by PIC16F877 microcontroller and the proposed design is experimentally demonstrated and evaluated for various loads.

Keywords

Gaza Strip Battery Voltage Battery Charge Output Waveform Inductive Load 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    J.H. Hahn, Modified sine-wave inverter enhanced. Power Electronics Technology, pp. 20–22 (2006)Google Scholar
  2. 2.
    B.J. Pierquet, D.J. Perreaul, A single-phase photovoltaic inverter topology with a series-connected energy buffer. IEEE Trans. Power Electron 28(10), 4603–4611 (2013)Google Scholar
  3. 3.
    ST Microelectronics, 1 kW dual stage DC-AC converter based on the STP160N75F3. Application note AN2794, Doc ID 14827 Rev 2, January 2012Google Scholar
  4. 4.
    S. Dixit, A. Tripathi, V. Chola, 800 VA pure sine wave inverter’s reference design. Texas Instruments Incorporated, Application Report SLAA602 (2013)Google Scholar
  5. 5.
    Z. Nick, 250 to 5000 watts PWM DC/AC 220V Power Inverter, http://www.instructables.com/id/250-to-5000-watts-PWM-DCAC-220V-Power-Inverter/
  6. 6.
    Datasheet SNVS766E, LM2524D/LM3524D Regulating Pulse Width Modulator. Texas Instruments Incorporated, June 2009–Revised May 2013Google Scholar
  7. 7.
    Futurlec, MOSFET Transistors—IRF Series, http://www.futurlec.com/TransMosIRF.shtml
  8. 8.
    IRF3205 datasheet, HEXFET® Power MOSFET. International Rectifier, http://www.irf.com/product-info/datasheets/data/irf3205.pdf

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  1. 1.Electrical Engineering DepartmentIUGGazaPalestine
  2. 2.Chair of AutomationSaarland UniversitySaarbrückenGermany

Personalised recommendations