Abstract
A detailed thermodynamic analysis of simple and regenerative cycles of adsorption refrigeration is presented. Two functions of the incoming and outgoing energy for the regenerative cycle using two isothermal adsorbers have been calculated in order to obtain the heated adsorber temperature at the end of heat recovery. Results are presented in terms of performances for the pair activated carbon AC-35 as adsorbent and methanol as adsorbate. These results demonstrated that the performance coefficient of double-bed adsorption refrigeration cycle increases with respect to the single-bed configuration. Several main factors affecting the performances of cycles are discussed according to the results of computer simulations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- COP s , COP d :
-
Performance coefficient in single bed and double bed, respectively
- Cp ml , Cp mg :
-
Specific heat of the adsorbate in liquid and vapour state, respectively, J/kg k
- Cp a , Cp g :
-
Specific heat of the adsorbent and the metal of the adsorber, respectively, J/kg k
- L :
-
Latent heat of evaporation, KJ/kg
- m, m a , m g :
-
Adsorbed mass, mass of the adsorbent and metallic mass of the adsorber, respectively, kg
- m max, m min :
-
Adsorption mass at adsorbed and desorbed state, respectively, kg/kg
- T a , T g :
-
Adsorption and regenerating temperature, respectively, °C
- T c1, T c2 :
-
Limit temperature of desorption and adsorption, respectively, °C
- T r :
-
Heated adsorber temperature at the end of heat recovery, °C
- T e , T c :
-
Evaporation and condensation temperature, respectively, °C
- Q f , Q c :
-
Cooling power and total heat necessary for heating the adsorber, respectively, KJ/kg
- Q r :
-
Heat recovered, KJ/kg
- q st :
-
Isosteric heat of adsorption, KJ/kg
- r :
-
Heat recovery ratio
- ΔT r :
-
Two-adsorber temperature difference at the end of heat recovery, °C
References
Meunier F (1999) Adsorption heat pump technology: possibilities and limits. In: Proceedings of the international sorption heat pump conference, Munich, p. 25
Cacciola G, Restuccia G (1994) Progress on adsorption heat pump. Heat Recovery Syst CHP 4:409–420
Chua HT et al (1999) Modeling the performance of two-bed silica gel–water adsorption chillers. Int J Refrigeration 22:194–204
Critoph RE (1999) Forced convection adsorption cycle with packed bed heat regeneration. Int J Refrigeration 22(1):38–46
Meunier F (1999) Adsorption heat pump technology: present and future. In: 20th international congress of refrigeration, IIR/IIF, Sydney, p 522
Critoph RE (1996) Gas fired air conditioning using a carbon–ammonia convective thermal wave cycle. In: Proceedings of absorption, Montreal, p 353
Miles DJ, Shelton SV (1996) Design and testing of a solid-sorption heat-pump system. Appl Therm Eng 16(5):389–394
Douss N, Meunier F (1989) Experimental study of cascading adsorption cycles. Chem Eng Sci 44:225–235
Miles DJ, Shelton SV (1991) Coupled heat transfer and thermodynamic adsorption heat pump analysis AES. Vol. 26. Heat pump design and application. In: Proceedings of winter annual meeting of the American society of mechanical engineers Atlanta, pp 33–38
Pons M, Grenier P (1986) A phenomenological adsorption equilibrium law extracted from experimental and theoretical considerations applied to the activated carbon + methanol pair. Carbon 24(5):615–625
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Chekirou, W., Boukheit, N., Karaali, A. (2015). Performance Improvement of Adsorption Cooling System by Heat Recovery Operation. In: Dincer, I., Colpan, C., Kizilkan, O., Ezan, M. (eds) Progress in Clean Energy, Volume 1. Springer, Cham. https://doi.org/10.1007/978-3-319-16709-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-16709-1_7
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16708-4
Online ISBN: 978-3-319-16709-1
eBook Packages: EnergyEnergy (R0)