Abstract
Stability analysis is a major aspect of the design of offshore platforms. It focuses on averting any failures associated with excessive heel or trim, capsizing, catastrophic loss of buoyancy, or even sinking. In this chapter, we cover the buoyancy and stability of offshore platforms from both viewpoints of theoretical and regulatory issues. Intact and damaged stability of floating structures are discussed and essential formulations of the associated problems are introduced. In doing so, the stability of a platform (its ability to be at or to recover equilibrium at acceptable heel and/or trim angles) is assessed by comparison of the righting moment to overturning moments from external loads. Methods of calculating the righting moment that varies with the heel angle are discussed. At small heel and trim angles, the metacentric height and displacement may be used directly to calculate the righting arm. Overturning moments that account for all static loads, including environmental, operational, and live loads are listed as well. Assumptions are needed to calculate the applied loads, and stability analysis does not usually include the upsetting dynamic forces. To address these issues, regulators set criteria, with embedded safety factors, and they require sufficient reserve stability beyond the equilibrium of the platform. These and the risks associated with flooding are addressed through hull subdivision and damaged analysis in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- 2-D:
-
two-dimensional
- 3-D:
-
three-dimensional
- AWM:
-
added-weight method
- CBM:
-
constant-buoyancy method
- FPSO:
-
floating production, storage and offloading
- LBM:
-
lost-buoyancy method
- LCB:
-
longitudinal center of buoyancy
- LCF:
-
longitudinal center of flotation
- LCG:
-
longitudinal center of gravity
- MCTC:
-
moment to change trim by one centimeter
- MODU:
-
mobile offshore drilling unit
- MWL:
-
mean-water level
- TCB:
-
transverse center of buoyancy
- TCG:
-
transverse center of gravity
- TLP:
-
tension leg platform
- VCB:
-
vertical center of buoyancy
- VCG:
-
vertical center of gravity
References
P. Bouguer: Traité du Navire (Research Publications, New Haven 1746), Microfilm
B. Padmanabhan, R.C. Ertekin: Setdown of a catenary-moored gravity platform, Mar. Struct. 9(7), 721–742 (1996)
K.J. Rawson, E.C. Tupper: Basic Ship Theory, Vol. 1, 3rd edn. (Longman, London 1983)
W. Muckle: Muckle’s Naval Architecture, Marine Engineering Series, 2nd edn. (Butterworths, London 1987)
E.V. Lewis: Principles of Naval Architecture: Stability and Strength, Vol. 1 (Society of Naval Architects and Marine Engineers, Alexandria 1988)
D.R. Derrett: Ship Stability for Masters and Mates, 5th edn. (Butterworth-Heinemann, Oxford 1999)
A. Biran: Ship Hydrostatics and Stability, 1st edn. (Butterworth-Heinemann, Amsterdam 2003)
O.M. Faltinsen: Sea Loads on Ships and Offshore Structures, Ocean Technology Series (Cambridge Univ. Press, Cambridge 1990)
I.M. Organization: The International Code on Intact Stability (International Maritime Organization, London 2009)
A.Bo. Shipping: Rules for Building and Classing Mobile Offshore Drilling Units – Part 3: Hull Construction and Equipment (American Bureau of Shipping, Houston 2014)
D.N. Veritas: Offshore Standard: Stability and Watertight Integrity (Det Norske Veritas AS, Nøvik 2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Aubault, A., Ertekin, R.C. (2016). Stability of Offshore Systems. In: Dhanak, M.R., Xiros, N.I. (eds) Springer Handbook of Ocean Engineering. Springer Handbooks. Springer, Cham. https://doi.org/10.1007/978-3-319-16649-0_34
Download citation
DOI: https://doi.org/10.1007/978-3-319-16649-0_34
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16648-3
Online ISBN: 978-3-319-16649-0
eBook Packages: EngineeringEngineering (R0)