Abstract
The seismic assessment of existing buildings is an essential issue of seismic engineering. This work is focused on the evaluation of the seismic performance of existing RC buildings according to the current European Technical Codes. Alternative types of analyses, all consistent to the Code provisions, have been performed with reference to a case-study, that is a real, RC hospital building. An accurate knowledge of the building has been achieved, as a result of a collaboration between the University of Florence and the Regional Government. Both elastic and inelastic modeling, as well as static and dynamic one, have been adopted in the analysis. The global response – with special attention to torsional effects – and the seismic performance of each single member have been found with all the performed analyses. The comparison among the analyses has been performed in terms of both global and local response parameters, and the reliability of each analysis has been pointed out.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Anagnastopoulos SA, Kyrkos MT, Stathopoulos KG (2013) Earthquake induced torsion in buildings: critical review and state of art. Proc. ASEM13, Jeju Korea. Thecno-Press Journals
Bhatt C, Bento R (2014) The extended adaptive capacity spectrum method for the seismic assessment of plan asymmetric buildings. Earthq Spectra (in-press)
Cristofaro MT (2009) Metodi di valutazione della resistenza a compressione del calcestruzzo di strutture in c.a. esistenti, tesi di dottorato, Università degli Studi di Firenze (in Italian)
Cristofaro MT, D’Ambrisi A, De Stefano M, Pucinotti R, Tanganelli M (2012) Studio sulla dispersione dei valori di resistenza a compressione del calcestruzzo di edifici esistenti. Giornale Prove Non Distruttive Monitoraggio Diagnostica 2/2012:32–39, ISSN: 1721-7075 (in Italian)
D’Ambrisi A, De Stefano M, Tanganelli M (2009) Use of pushover analysis for predicting seismic response of irregular buildings: a case study. J Earthq Eng 13:1089–1100, Taylor & Francis
De Luca F, Verderame GM (2011) A practice-oriented approach for the assessment of brittle failures in existing reinforced concrete elements. Eng Struct 48:373–388
De Luca F, Verderame GM, Manfredi G (2011) La verifica di edifici esistenti in cemento armato: criticità dell’attuale approccio normativo italiano. 26° convegno nazionale AICAP, Padova 19–21 May 2011 (in Italian)
De Stefano M, Tanganelli M, Viti S (2013a) On the variability of concrete strength as a source of irregularity in elevation for existing RC buildings: a case study. Bull Earthq Eng 11(5):1711–1726. doi:10.1007/s10518-013-9463-2, ISSN: 1573-1456
De Stefano M, Tanganelli M, Viti S (2013b) Effect of the variability in plan of concrete mechanical properties on the seismic response of existing RC framed structures. Bull Earthq Eng 11(4):1049–1060. doi:10.1007/s10518-012-9412-5, ISSN: 1573-1456
De Stefano M, Tanganelli M, Viti S (2014a) Variability in concrete mechanical properties as a source of in-plan irregularity for existing RC framed structures. Eng Struct Vol 59:161–172
De Stefano M, La Brusco A, Mariani V, Tanganelli M, Viti S (2014b) The role of structural modeling on the seismic assessment of existing RC buildings according to Eurocode 8. In: 2nd European conference on earthquake engineering and seismology. Istanbul, 25–29 Aug
De Stefano M, Tanganelli M, Viti S (2015) Torsional effects related to concrete strength variability in existing buildings: a numerical analysis. Earthq Struct 8(2):379–399
EC 8-3 (2005) Design of structures for earthquake resistance, part 3: strengthening and repair of buildings, European standard EN 1998-3. European Committee for Standardization (CEN), Brussels
Fajfar P, Marusic D, Perus I (2005) Torsional effects in the pushover-based seismic analysis of buildings. J Earthq Eng 9(6):831–854
Itaca (2008) Database of the Italian strong motions data. http://itaca.mi.ingv.it
NTC (2008) Norme tecniche per le costruzioni. D.M. Ministero Infrastrutture e Trasporti 14 gennaio 2008, G.U.R.I. 4 Febbraio 2008, Roma (in Italian)
SAP2000 Advanced 14.0.0, Structural analysis program (2009) Analysis reference manual. Computer and Structures, Berkley
Sirles C, Viksne A (1990) Site-specific shear wave velocity determinations for geotechnical engineering applications. In: Geotechnical and enviromental geophysics, vol. 3, Soc. Expl. Geophys. (Tulsa, Oklahoma), pp. 121-131
UNI EN ISO 6892-1 (2009) Materiali metallici – Prova di trazione – Parte 1: Metodo di prova a temperatura ambiente, International Organization for Standardization, Geneva
Acknowledgements
The financial support provided by ReLUIS within the project “ReLUIS-DPC 2014” (Progettazione e valutazione della sicurezza e della vulnerabilità di edifici ed opere) is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
La Brusco, A., Mariani, V., Tanganelli, M., Viti, S., De Stefano, M. (2016). Seismic Assessment of an Existing Irregular RC Building According to Eurocode 8 Methods. In: Zembaty, Z., De Stefano, M. (eds) Seismic Behaviour and Design of Irregular and Complex Civil Structures II. Geotechnical, Geological and Earthquake Engineering, vol 40. Springer, Cham. https://doi.org/10.1007/978-3-319-14246-3_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-14246-3_12
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-14245-6
Online ISBN: 978-3-319-14246-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)