Advertisement

Determination and Modelling of Heat Transfer Mechanisms Acting Among Machine Tool Components

  • Sarah Vieler
  • Yona FrekersEmail author
  • Michael Burghold
  • Reinhold Kneer
Chapter
Part of the Lecture Notes in Production Engineering book series (LNPE)

Abstract

Quantifying the thermal resistances between machine components in contact with each other has key importance for the characterisation of the machine tool’s thermal behaviour. Against this background, this paper outlines analytical, experimental and numerical approaches to calculate thermal resistances at contacting surfaces.

Keywords

Heat Transfer Heat Transfer Coefficient Machine Tool Heat Transfer Mechanism Inverse Heat Conduction Problem 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Bahrami M, Culham JR, Yovanovich MM, Schneider GE (2004) Thermal joint resistance of conforming rough surfaces with gas-filled gaps. J Thermophys Heat Transf 18:318–325CrossRefGoogle Scholar
  2. Bhushan B (1998) Contact mechanics of rough surfaces in tribology: multiple asperity contact. Tribol Lett 4:1–35Google Scholar
  3. Fieberg C (2007) Kontaktwärbergang unter hohen Druck- und Temperaturbedingungen. Dissertation, RWTH AachenGoogle Scholar
  4. Frekers Y, Vieler S, van Buren S, et al (2014) Mechanical simulation. In: 15th International heat transfer conference (accepted)Google Scholar
  5. Görke D (2010) Experimentelle und numerische Untersuchungen des normal- und Tangentialkontaktverhaltens rauer metallischer Oberflächen. PhD. thesis, Universität ErlangenGoogle Scholar
  6. Mikic BB (1974) Thermal contact conductance; theoretical considerations. Int J Heat Mass Transf 17:205–214CrossRefGoogle Scholar
  7. Willner K (2004) Elasto-plastic normal contact of three-dimensional fractal surfaces using halfspace theory. J Tribol 126:28–33. doi: 10.1115/1.1631019 CrossRefGoogle Scholar
  8. Yovanovich MM (2005) Four decades of research on thermal contact, gap, and joint resistance in microelectronics. IEEE Trans Compon Packag Technol 28:182–206. doi: 10.1109/TCAPT.2005.848483 CrossRefGoogle Scholar

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  • Sarah Vieler
    • 1
  • Yona Frekers
    • 1
    Email author
  • Michael Burghold
    • 1
  • Reinhold Kneer
    • 1
  1. 1.Institute of Heat and Mass TransferRWTH Aachen UniversityAachenGermany

Personalised recommendations