Abstract
Driver assistance systems require fundamental information from sensors. In order to meet the high standard of safety and availability of these systems, the product quality is essential. Therefore, the selection process plays an important role during the purchasing process in the automotive industry. The surrounding and specific application defines the sensor design and manufacturing process of the sensor.
For advanced system functions, the requirements of sensor data content and precision are increasing continuously; however, there are still some values which have not changed since the first ABS was introduced into the market. Even though the function remains relatively unchanged, the technology itself is changing. This opens up the possibility for the introduction of new features.
This chapter provides a general overview of the key figures related to sensors for safety systems with details to the design and with special considerations to the fitment in the vehicle.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Axten E, Schier J (2007) Inertial sensor performance for diverse integration strategies in automotive safety. In: Valldorf J, Gessner W (eds) Advanced microsystems for automotive applications. Springer, Berlin, pp 251–263
Baus M et al (2014) Skalierbarer MM7 Inertial-Sensor-Cluster für aktive und passive Sicherheits- und Fahrerassistenzfunktionen im Kraftfahrzeug (Scalable MM7 Inetrial-sensor-cluster for active and passive safety and driver assistance functions in automobile). In: Tille T et al (eds) Sensoren im Automobil V, vol 132, Haus der Technik Fachbuch. Expert Verlag, Renningen, pp 53–67
Golderer W et al (1998) Yaw rate sensor in silicon micromachining technology for automotive applications. In: Ricken DE, Gessner W (eds) Advanced microsystems for automotive applications. Springer, Berlin, pp 69–77
Hagleitner C, Kierstein KU (2005) Circuit and system integration. In: Baltes H, Brand O, Fedder GK, Hierold C, Korvink J, Tabata O (eds) Advanced micro and nanosystems, vol 2, CMOS-MEMS. Wiley-VCH, Weinheim, pp 513–577
Mörbe M (2006) Standardisierung von Sensorschnittstellen – Chance oder Risiko (Standardisation of sensor interfaces – chances and risks). In: sensor4car conference “Sensorsystemtechnik und Sensortechnologie”, Böblingen, 25–26 Oct 2006
Mörbe M (2012) Advanced systems for motorcycles based on inertial sensors. In: Stan C (ed) Development trends of motorcycles IV, vol 127, Haus der Technik Fachbuch. Expert Verlag, Renningen, pp 122–144, 2013
Mörbe M, von Hörsten C (2003) Force and torque sensors. In: Marek J, Trah HP, Suzuki Y, Yokomori I (eds) Sensors for automotive technology, vol 4. Wiley-VCH, Weinheim, pp 450–462
Mörbe M, Zwiener G (2003) Wheel-speed sensors. In: Marek J, Trah HP, Suzuki Y, Yokomori I (eds) Sensors for automotive technology, vol 4. Wiley-VCH, Weinheim, pp 403–416
Published by Carl Hanser, Munich: Kleines Teil, große Wirkung (Small part, large effect). In: Form+Werkzeug 5/2011 p 24, 25
Schier J, Willig R, Miekley K (2005) Mikromechanische Sensoren für fahrdynamische Regelsysteme (Micro mechanical sensors for drive dynamic control systems). ATZ 107:11
Walter K (2011) Erfassung des Fahrerbremswunsches in Hybrid- und Elektrofahrzeugen (Detection of driver breaking intention in hybrid and electrical cars). In: Specialist VDI conference “Innovative Bremstechnik”, Stuttgart, 12.–13.12.2011
Walter K, Arlt A (2007) Drahtlose Sensorik – Anforderungen in sicherheitskritischen Fahrdynamiksystemen (Wireless sensors – Requirements for safety critical drive dynamic systems). In: sensor4car conference “Sensorsystemtechnik und Sensortechnologie”, Fellbach, 24.–25.10.2007
Welsch W (2006) Intelligente Schnittstellen für Raddrehzahlsensoren (Intelligent interfaces for wheel speed sensors). In: sensor4car conference “Sensorsystemtechnik und Sensortechnologie”, Böblingen, 25.–26.10.2006
Willig R, Lemejda M (2012) A new inertial sensor unit for dynamic stabilizing systems of powered two wheelers 9th international motorcycle conference, Cologne, 1–2 Oct 2012
Willig R, Mörbe M (2003) New generation of inertial sensor cluster for ESP-and future vehicle stabilizing systems in automotive applications. SAE Permissions, Warrendale
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this entry
Cite this entry
Mörbe, M. (2016). Vehicle Dynamics Sensors for DAS. In: Winner, H., Hakuli, S., Lotz, F., Singer, C. (eds) Handbook of Driver Assistance Systems. Springer, Cham. https://doi.org/10.1007/978-3-319-12352-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-12352-3_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-12351-6
Online ISBN: 978-3-319-12352-3
eBook Packages: EngineeringReference Module Computer Science and Engineering