Abstract
With the proliferation of counterfeit components in the electronic component supply chain over the last decade, it has become imperative that manufacturers, distributors, and users of electronic components inspect all incoming electronic components for authenticity, especially for those parts that will be used in critical systems, infrastructures, and applications (aerospace, military, medical, transportation, etc.). The risk of using a tampered, unreliable, or untrustworthy counterfeit component in such systems can be catastrophic (i.e., life-or-death). In addition, critical systems are often composed of older and obsolete electronic components which are no longer available from the original component manufacturers (OCMs) or OCM-authorized distributors. Following the laws of supply and demand, obsolete components are therefore more expensive, thus increasing the financial incentive for counterfeiters to source fakes of such parts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
SAE, Counterfeit electronic parts; avoidance, detection, mitigation, and disposition (2009), http://standards.sae.org/as5553/
SAE, Test methods standard; counterfeit electronic parts. Work in Progress, http://standards.sae.org/wip/as6171/
CTI, Certification for coutnerfeit components avoidance program. September 2011
IDEA, Acceptability of electronic components distributed in the open market, http://www.idofea.org/products/118-idea-std-1010b
U. Guin, M. Tehranipoor, D. DiMase, M. Megrdichian, Counterfeit IC detection and challenges ahead. ACM/SIGDA E-NEWSLETTER 43(3), (2013)
U. Guin, D. DiMase, M. Tehranipoor, A comprehensive framework for counterfeit defect coverage analysis and detection assessment. J. Electron. Test. 30(1), 25–40 (2014)
U. Guin, D. DiMase, M. Tehranipoor, Counterfeit integrated circuits: detection, avoidance, and the challenges ahead. J. Electron. Test. 30(1), 9–23 (2014)
U. Guin, K. Huang, D. DiMase, J. Carulli, M. Tehranipoor, Y. Makris, Counterfeit integrated circuits: a rising threat in the global semiconductor supply chain. Proc. IEEE 102(8), 1207–1228 (2014)
U. Guin, M. Tehranipoor, On selection of counterfeit IC detection methods, in IEEE North Atlantic Test Workshop (NATW), May 2013
VHX-2000 series Digital Microscope [Online], Available: http://www.keyence.com/products/microscope/digital-microscope/vhx-2000/index.jsp
Intel, Ball Grid Array (BGA) Packaging, http://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-14-databook.pdf
ZEISS Xradia 510 Versa, Submicron X-ray Imaging: Flexible Working Distance at the Highest Resolution. [Online], Available: http://www.xradia.com/versaxrm-510/
X. Pan, Unified reconstruction theory for diffraction tomography, with consideration of noise control. JOSA A 15(9), 2312–2326 (1998)
N. Asadizanjani, S. Shahbazmohamadi, E. H. Jordan, Investigation of surface geometry change in thermal barrier coatings using computed x-ray tomography, in 38th Int’l Conf and Expo on Advanced Ceramics and Composites, ICACC 2014
Departnent of Defense, Test Method Standard: Microcircuits (2010), http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-883/std883.pdf
Departnent of Defense, Test Method Standard: Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts (2014), http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-1580/std1580.pdf.
J. Goldstein, D. Newbury, D. Joy, C. Lyman, P. Echlin, E. Lifshin, L. Sawyer, J. Michael, Scanning Electron Microscopy and X-ray Microanalysis (Springer, New York, 2003)
Quanta SEM [Online], Available: http://www.fei.com/products/sem/quanta-products/?ind=MS
JEDEC, JESD22-A104D: Temperature Cycling, March 2009, http://www.jedec.org/sites/default/files/docs/22a104d.pdf
Departnent of Defense, Test Method Standard: Test Methods for Semiconductor Devices (2012), http://www.landandmaritime.dla.mil/Downloads/MilSpec/Docs/MIL-STD-750/std750.pdf
Departnent of Defense, Test Method Standard: Electronic and Electrical Component Parts (2013), http://www.dscc.dla.mil/Downloads/MilSpec/Docs/MIL-STD-202/std202.pdf
CHASE, ARO/CHASE Special Workshop on Counterfeit Electronics, January 2013, http://www.chase.uconn.edu/arochase-special-workshop-on-counterfeit-electronics.php
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Tehranipoor, M.(., Guin, U., Forte, D. (2015). Physical Tests for Counterfeit Detection. In: Counterfeit Integrated Circuits. Springer, Cham. https://doi.org/10.1007/978-3-319-11824-6_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-11824-6_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-11823-9
Online ISBN: 978-3-319-11824-6
eBook Packages: EngineeringEngineering (R0)