Skip to main content

Robust Integral Sliding Mode Tracking Control of a Servo Drives with Reference Trajectory Generator

  • Conference paper
  • First Online:
Analysis and Simulation of Electrical and Computer Systems

Part of the book series: Lecture Notes in Electrical Engineering ((LNEE,volume 324))

Abstract

In the paper robust control of speed and position of servo drives is analysed. A modified approach to the design of a robust speed and position controller is proposed, in which the trajectory of motion is invariant to load torque and system parameter variations. The proposed controller structure consists of a reference trajectory generator and a sliding mode controller with output integrator, operating with the reference model. Simple structure of reference signal generator is based on discrete model of an ideal drive system with cascade control. The obtained experimental results verify the proposed method and prove good quality of control.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 219.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Sabanovic A (2011) Variable structure systems with sliding modes in motion control—a survey. IEEE Trans Ind Inform 7(2):212–223

    Article  Google Scholar 

  2. Brock S, Deskur J and Zawirski K (1999) Modified sliding-mode speed controller for servo drives. In: Proceedings of IEEE international symposium on industrial electronics, ISIE, vol 2, Bled Slovenia, pp 635–640

    Google Scholar 

  3. Kroger T (2011) Online trajectory generation: straight-line trajectories. IEEE Trans Rob 27(5):1010–1016

    Article  Google Scholar 

  4. Chen G (2009) An online generation of time-optimal trajectories for piecewise step references. In: Proceedings of IEEE international conference on control and automation, ICCA, pp 1739–1743

    Google Scholar 

  5. Liu S. (2002) An on-line reference-trajectory generator for smooth motion of impulse-controlled industrial manipulators. In: Proceedings of the 7th international workshop on advanced motion control, AMC, pp 365–370

    Google Scholar 

  6. Bartolini G, Pisano A, Punta E, Usai E (2003) A survey of applications of second-order sliding mode control to mechanical systems. Int J Control 76:875–892

    Article  MATH  MathSciNet  Google Scholar 

  7. Brock S (2009) Sliding mode controller for direct drive with dry friction. Przegląd Elektrotechniczny (Electrical Review) 85(7):125–129

    Google Scholar 

  8. Brock S, Łuczak D (2011) Speed control in direct drive with non-stiff load. In: Proceedings of IEEE international symposium on industrial electronics (ISIE), Gdańsk, Poland, pp 1937–1942

    Google Scholar 

  9. Brock S (2013) Hybrid PI sliding mode position and speed controller for direct drive. In: Mechatronics. Springer International Publishing, Switzerland, pp 741–748

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Stefan Brock .

Editor information

Editors and Affiliations

Appendix

Appendix

Table 1

Table 1 Data of investigated drive

Rights and permissions

Reprints and permissions

Copyright information

© 2015 Springer International Publishing Switzerland

About this paper

Cite this paper

Brock, S. (2015). Robust Integral Sliding Mode Tracking Control of a Servo Drives with Reference Trajectory Generator. In: Gołębiowski, L., Mazur, D. (eds) Analysis and Simulation of Electrical and Computer Systems. Lecture Notes in Electrical Engineering, vol 324. Springer, Cham. https://doi.org/10.1007/978-3-319-11248-0_23

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-11248-0_23

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-11247-3

  • Online ISBN: 978-3-319-11248-0

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics