Abstract
In the paper robust control of speed and position of servo drives is analysed. A modified approach to the design of a robust speed and position controller is proposed, in which the trajectory of motion is invariant to load torque and system parameter variations. The proposed controller structure consists of a reference trajectory generator and a sliding mode controller with output integrator, operating with the reference model. Simple structure of reference signal generator is based on discrete model of an ideal drive system with cascade control. The obtained experimental results verify the proposed method and prove good quality of control.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sabanovic A (2011) Variable structure systems with sliding modes in motion control—a survey. IEEE Trans Ind Inform 7(2):212–223
Brock S, Deskur J and Zawirski K (1999) Modified sliding-mode speed controller for servo drives. In: Proceedings of IEEE international symposium on industrial electronics, ISIE, vol 2, Bled Slovenia, pp 635–640
Kroger T (2011) Online trajectory generation: straight-line trajectories. IEEE Trans Rob 27(5):1010–1016
Chen G (2009) An online generation of time-optimal trajectories for piecewise step references. In: Proceedings of IEEE international conference on control and automation, ICCA, pp 1739–1743
Liu S. (2002) An on-line reference-trajectory generator for smooth motion of impulse-controlled industrial manipulators. In: Proceedings of the 7th international workshop on advanced motion control, AMC, pp 365–370
Bartolini G, Pisano A, Punta E, Usai E (2003) A survey of applications of second-order sliding mode control to mechanical systems. Int J Control 76:875–892
Brock S (2009) Sliding mode controller for direct drive with dry friction. Przegląd Elektrotechniczny (Electrical Review) 85(7):125–129
Brock S, Łuczak D (2011) Speed control in direct drive with non-stiff load. In: Proceedings of IEEE international symposium on industrial electronics (ISIE), Gdańsk, Poland, pp 1937–1942
Brock S (2013) Hybrid PI sliding mode position and speed controller for direct drive. In: Mechatronics. Springer International Publishing, Switzerland, pp 741–748
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendix
Appendix
Table 1
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Brock, S. (2015). Robust Integral Sliding Mode Tracking Control of a Servo Drives with Reference Trajectory Generator. In: Gołębiowski, L., Mazur, D. (eds) Analysis and Simulation of Electrical and Computer Systems. Lecture Notes in Electrical Engineering, vol 324. Springer, Cham. https://doi.org/10.1007/978-3-319-11248-0_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-11248-0_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-11247-3
Online ISBN: 978-3-319-11248-0
eBook Packages: EngineeringEngineering (R0)