Abstract
The characterisation of the aeroacoustic wall pressure field generated by turbulent flow is a difficult task that often requires instrumented panels and huge facilities like wind tunnels. In situ and non-intrusive experiments are rather not possible. In addition, the pressure field is dominated by the aerodynamic component and the experimental dynamics are not sufficient to measure correctly spectra in low wavenumbers by microphones. The present chapter deals with such a separation method by using the Force Analysis Technique (FAT). FAT is based on the use of the equation of motion of the structure (here a plate) and on the approximation of the fourth derivatives by a finite difference scheme. In the case of turbulent flow, the force auto-spectrum can be deduced at one point of the structure by measuring the velocity at 13 points synchronously. To this purpose, an array of 13 pU (acoustic pressure/particle velocity) probes has been made up. This array is moved in the near-field of the plate to identify map of the wall pressure level applied on the surface of the plate. In the present application, it is shown that FAT only identifies the component of the excitation with wavenumber lower than the natural flexural wavenumber of the plate, due to filtering effect of the plate and of the finite difference scheme. In most cases, the convective peak is then canceled and only the acoustic part of the turbulent flow is identified. This property can be of great interest for vehicle manufacturers to quantify the part of the wall pressure that is responsible of the radiated noise or to use FAT as a source separation technique.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
W.K. Blake, Mechanics of flow induced sound and vibration (Academic Press, Waltham 1986)
C. Durant, G. Robert, P.J.T. Filippi, P.-O. Mattei, Vibroacoustic response of a thin cylindrical shell excited by a turbulent internal flow: comparison between numerical prediction and experimentation. J. Sound Vib. 229(5), 1115–1155 (2000)
M.K. Bull, Wall-pressure fluctuations beneath turbulent boundary layers: some reflections on forty years of research. J. Sound Vib. 190, 299–315 (1996)
W. Graham, A comparison of models for the wavenumber-frequency spectrum of turbulent boundary layer pressures. J. Sound Vib. 206, 541–565 (1997)
G.M. Corcos, Resolution of pressure in turbulence. J. Acoust. Soc. Am. 49(3), 192–199 (1963)
B.M. Efimtsov, Characteristics of the field of turbulent wall pressure fluctuations at large Reynolds numbers. Sov. Phys. Acoust. 28(4), 289–292 (1982)
C. Maury, P. Gardonio, S.J. Elliot, A wavenumber approach to modelling the response of a randomly excited panel, part I: general theory. J. Sound Vib. 252, 83–113 (2002)
S. De Rosa, F. Franco, Exact and numerical responses of a plate under turbulent boundary layer excitation. J. Fluids Struct. 24, 212–230 (2008)
O. Collery, J.L. Guyader, Solving the vibroacoustic equations of plates by minimization of error on a sample of observation points. J. Acoust. Soc. Am. 127, 1347–1356 (2010)
S. Finnveden, F. Birgersson, U. Ross, T. Kremer, A model of wall pressure correlation for prediction of turbulence-induced vibration. J. Fluids Strcut. 20, 1127–1143 (2005)
N. Totaro, G. Robert, J.L. Guyader, Frequency averaged injected power under boundary layer excitation: an experimental validation. Acta Acust. 94, 534–547 (2008)
C. Pézerat, J.L. Guyader, Two inverse methods for localization of external sources exciting a beam. Acta Acust. 3, 1–10 (1995)
C. Pézerat, J.L. Guyader, Force analysis technique: reconstruction of force distribution on plates. Acust. United Acta Acust. 86, 322–332 (2000)
N. Martin, P. Leehey, Low wavenumber wall pressure measurements using a rectangular membrane as a spatial filter. J. Sound Vib. 52, 95–120 (1977)
C. Pézerat, J.L. Guyader, Identification of vibration sources. Appl. Acoust. 61, 309–324 (2000)
M.C. Djamaa, N. Ouella, C. Pézerat, J.L. Guyader, Reconstruction of a distributed force applied on a thin cylindrical sheel by an inverse method and spatial filtering. J. Sound Vib. 301, 560–575 (2007)
C. Renzi, C. Pézerat, J.L. Guyader, Vibratory source identification by using the finite element model of a subdomain of a flexural beam. J. Sound Vib. 332(3), 545–562 (2013)
H.E. de Bree, P. Leussink, T. Korthorst, H. Jansen, T. Lammerink, M. Elwenspoek, The microflown: a novel device measuring the acoustical flows. Sens. Actuators A, Phys SNA054/1-3, 552–557 (1996)
B. Arguillat, D. Ricot, C. Bailly, G. Robert, Measured wavenumber-frequency spectrum associated with acoustic and aerodynamic wall pressure fluctuations. J. Acoust. Soc. Am. 128(4), 1647–1655 (2010).
D. Lecoq, C. Pézerat, J.-H. Thomas, W. Bi, in How an inverse vibration method can be used for the extraction of the acoustic component of a turbulent boundary layer? Proceedings of Internoise 2012, New York (2012)
Q. Leclère, C. Pézerat, Vibration source identification using corrected finite difference schemes. J. Sound Vib. 331(6), 1366–1377 (2012)
D. Lecoq, Identification par problème inverse vibratoire des bas nombres d’onde de pressions pariétales turbulentes, PhD thesis, 2013
L.E. Wittig, A. Sinha, Simulation of multicorrelated random processes using the FFT algorithm. J. Acoust. Soc. Am. 58, 630–634 (1975)
A. Hekmati, D. Ricot, P. Druault, Numerical synthesis of aeroacoustic wall pressure fields over a flat plate: Generation, transmission and radiation analyses. J. Sound Vib. 332(13), 3163–3176 (2013)
M. Goody, in An empirical spectral model of surface-pressure fluctuations that includes Reynolds number effects. Proceedings of 8th AIAA/CEAS Aeroacoustics Conference and Exhibit, Brenckenridge (2002), pp. 2002–2565
J.L. Guyader, Vibration of continuous media. ISTE Ltd (2006)
C. Pézerat, Q. Leclère, N. Totaro, M. Pachebat, Identification of vibration excitations from acoustic measurements using near-field acoustic holography and the force analysis technique. J. Sound Vib. 326, 540–556 (2009)
C. Renzi, Identification expérimentale de sources vibratoires par résolution du problème inverse modélisé par un opérateur éléments finis local, PhD thesis, 2011
Acknowledgments
The authors are indebted to the institut Carnot Ingénierie@Lyon for its support and funding.
The authors want to thank the Laboratoire de Mécanique des Fluides et d’Acoustique and more particularly P. Souchotte and G. Robert for their help and support.
This research project was funded by the Ministry of National Education Research and Technology of France.
This work was performed within the framework of the Labex CeLyA of Université de Lyon, operated by the French National Research Agency (ANR-10-LABX-0060/ANR-11-IDEX-0007).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Totaro, N., Pézerat, C., Leclère, Q., Lecoq, D., Chevillotte, F. (2015). Identification of Boundary Pressure Field Exciting a Plate Under Turbulent Flow. In: Ciappi, E., De Rosa, S., Franco, F., Guyader, JL., Hambric, S. (eds) Flinovia - Flow Induced Noise and Vibration Issues and Aspects. Springer, Cham. https://doi.org/10.1007/978-3-319-09713-8_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-09713-8_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-09712-1
Online ISBN: 978-3-319-09713-8
eBook Packages: EngineeringEngineering (R0)