Abstract
This work introduces the concept of a compact high-speed rotation heat pump combining rotation-driven hydrostatic compression and intermediate heat exchange in one compact device with two working fluids. The full system consists of the rotating part and external heat exchanger, compressor and turbine forming two separate closed gas loop cycles connected through the intermediate heat exchanger. This separates the addition and extraction of work/heat for the two cycles: Compressor work and cold environment heat is added to the cooling cycle, heat is transferred from cooling cycle to heating cycle, turbine work is extracted to alleviate some of the compressor work, and the warm environment extracts heat from the heating cycle. The necessary compressor work and achievable turbine work is determined based on a heat transfer generated imbalance between hydrostatic fluid columns. This is like two heat-transfer-coupled normal-reversed Brayton cycles without phase change, differing from conventional vapor-compression cycles.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chua, K.J., S.K. Chou, and W.M. Yang, Advances in heat pump systems: A review. Applied Energy, 2010. 87(12): p. 3611–3624.
Sarkar, J., Ejector enhanced vapor compression refrigeration and heat pump systems—A review. Renewable and Sustainable Energy Reviews, 2012. 16(9): p. 6647–6659.
Self, S.J., B.V. Reddy, and M.A. Rosen, Geothermal heat pump systems: Status review and comparison with other heating options. Applied Energy, 2013. 101(0): p. 341–348.
Eslami-nejad, P. and M. Bernier, Coupling of geothermal heat pumps with thermal solar collectors using double U-tube boreholes with two independent circuits. Applied Thermal Engineering, 2011. 31(14–15): p. 3066–3077.
Hepbasli, A., et al., A review of gas engine driven heat pumps (GEHPs) for residential and industrial applications. Renewable and Sustainable Energy Reviews, 2009. 13(1): p. 85–99.
Kundu, P.K. and I.M. Cohen, Fluid mechanics 4th ed. 4 ed, 2008.
Childs, P.R.N., Rotating Flow, 2011, Oxford: Butterworth-Heinemann. 389.
Marshall, J., et al., Hydrostatic, quasi-hydrostatic, and nonhydrostatic ocean modeling. Journal of Geophysical Research, 1997. 102(C3): p. 5733–5752.
Kuppan, T., Heat exchanger design handbook. Mechanical engineering, 2000, New York: Marcel Dekker.
Incropera, F.P. and D.P. DeWitt, Fundamentals of heat and mass transfer sixth ed., 2007, Hoboken NJ: John Wiley.
Prausnitz, J.M., Isentropic Compression of Nonideal gases. Industrial and engineering chemistry, 1955.
Poling, B.E., J.M. Prausnitz, and J.P. O'Connell, The Properties of Gases and Liquids. 5 ed, 2001: McGraw-Hill.
Acknowledgement
Supported by “Regionalt bedriftsprosjekt fra Oslofjordfondet” in Norway, for project number: 226001, “Rotobooster and RotoHeatPump, phase 2 (OFF-2)”
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Karlsen, H., Dong, T. (2015). A Concept Study for a Compact High-Speed Rotation Heat Pump. In: Selvaraj, H., Zydek, D., Chmaj, G. (eds) Progress in Systems Engineering. Advances in Intelligent Systems and Computing, vol 366. Springer, Cham. https://doi.org/10.1007/978-3-319-08422-0_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-08422-0_15
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-08421-3
Online ISBN: 978-3-319-08422-0
eBook Packages: EngineeringEngineering (R0)